Abstract:Concrete structures in cold regions are highly susceptible to internal cracks due to the periodic variation of temperature and the alternation of drying and wetting in the long term. Conventional damage detecting techniques for concrete are often destructive and need tedious manual operation. Concrete strain monitoring is a non-destructive measurement technique, which provides continuously streaming strain data and has the potential of detecting damage automatically based on a data-driven approach. Temperature-induced strains are highly responsive to damage to concrete structures under the freeze-thaw (F-T) cycles. In this regard, we propose a novel damage detection approach based on temperature-induced strains. The proposed method separates the temperature-induced component from the measured data based on the independent component analysis, which improves the modeling accuracy of the Gaussian processes modeling (GPM) approach for detecting damage. The principle of damage detection is extracting the features related to the damage from the measured strain data. The model residuals of temperature-induced strains are extracted as features that are sensitive to concrete damage. A novel damage index is established to determine the presence of structural damage based on the Kolmogorov Smirnov (KS) test, which estimates the probability distribution of residuals. To increase the reliability of damage detection and decrease the pseudo fault alarm rate, the general extreme value (GEV) theory is considered to determine a reliable threshold limit. A moving window strategy is introduced to perform damage detection and identify the damage occurrence time effectively. Monitoring data of the F-T cycle experiment are utilized to validate the proposed method. The results of three different damage cases demonstrate the effectiveness of the proposed data-driven method in terms of detecting the damage and identifying the damage occurrence time. The variation rules of the concrete temperature characteristics are revealed through the damage detection results under F-T cycles.

Compressive Sampling–based Ultrasonic Computerized Tomography Technique for Damage Detection in Concrete-Filled Steel Tube in a Bridge

Application of Compressed Sensing in the Guided Wave Structural Health Monitoring of Switch Rails

An Improved Ultrasonic Computerized Tomography (UCT) Technique for Damage Localization Based on Compressive Sampling (CS) Theory

The Study of Compressive Sampling in Ultrasonic Computerized Tomography

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

A Gaussian Processes-Based Approach for Damage Detection of Concrete Structure Using Temperature-Induced Strain

Ultrasonic computed tomography-based internal-defect detection and location of underwater concrete piers

The Study of Damage Identification Based on Compressive Sampling

Compressive sensing of phased array ultrasonic signal in defect detection: Simulation study and experimental verification

High-resolution ultrasonic imaging technology for the damage of concrete structures based on total focusing method

Detection and Imaging of Corrosion Defects in Steel Structures Based on Ultrasonic Digital Image Processing

High Resolution Tomography of Pipeline Using Multi-Helical Lamb Wave Based on Compressed Sensing

Automated Damage Localization and Quantification in Concrete Bridges Using Point Cloud-Based Surface-Fitting Strategy

Compressed Sensing Method for Health Monitoring of Pipelines Based on Guided Wave Inspection

Low-frequency Ultrasonic Array Imaging for Detecting Concrete Structural Defects in Blind Zones

An Overview of 38 Least Squares–based Frameworks for Structural Damage Tomography

Imaging of vertical surface-breaking cracks in concrete members using ultrasonic shear wave tomography

Application of Ultrasonic Computed Tomography (UCT) Technology to Detect Defects in Stone

Automatic identification method of bridge structure damage area based on digital image

Application of Impact Imaging Method on Nondestructive Detection of Void Defects in Sandwich-Structured Immersed Tunnel

Guided Wave-Based Damage Detection of Square Steel Tubes Utilizing Structure Symmetry