Abstract:Anechoic coating attached to the surface of an underwater object is used for absorbing sound wave thereby reducing the reflection. The anechoic coating is often made of viscoelastic materials embedded with designed acoustic substructures, such as air cavities. The prediction of sound scattering on underwater object coated with such materials can be challenging due to the complex geometry of the anechoic coating, and it has been a research subject of interest in underwater acoustics. In this paper, we study the sound scattering on an infinite cylindrical shell coated with anechoic coating. Two types of coatings are considered: one is a layer of homogeneous isotropic material, and the other is a layer of homogeneous isotropic material with periodically embedded cylindrical air cavities. We use an equivalent method, in which the anechoic coating with air-filled cavities is regarded as a homogeneous isotropic material with equivalent material properties. The key point of the equivalent method is to ignore the internal structure of the anechoic coating, and the anechoic coating is considered as a homogeneous isotropic layer with the same complex reflection coefficient. These equivalent material properties are acquired based on the data of complex reflection coefficient obtained from either the physical experiment using water-filled impedance tube or the numerical experiment using the finite element method with COMSOL Mutiphysics software. Then a genetic algorithm is developed to inversely calculate the equivalent Young's modulus, Poisson's ratio, and damping loss factor of the coating which has the same reflection coefficient as the original coating. The results of the equivalent material properties show that 1) the three properties are all frequency dependent; 2) in general, equivalent Young's modulus increases with the increase of frequency, meanwhile the equivalent damping loss factor tends to decrease; 3) there is a wide variation in the results of equivalent Poisson's ratio. Despite that, the reflection coefficient of the equivalent homogeneous isotropic coating accords well with that of the original coating.Based on the above, the sound scattering on the infinite cylindrical shell coated with the equivalent coating is calculated by using the finite element method based on COMSOL Mutiphysics software. In order to verify the accuracy of the equivalent model, we use COMSOL Mutiphysics software to build up the full geometrical model of the coated shell to calculate the sound scattering. This can be considered as the benchmark. The results of morphic function show that the scattering calculated using equivalent material properties accords well with that obtained from the full finite element model with a mean error of about 1 dB in all frequency spectrum range.

An Equivalent Method for Predicting Acoustic Scattering of Coated Shell Using Identified Viscoelastic Parameters of Anechoic Coating

Investigation of Underwater Sound Scattering on A Cylindrical Shell Coated with Anechoic Coatings by the Finite Element Method Based on an Equivalent Parameter Inversion

Optimization of Decoupling Performance of Underwater Acoustic Coating with Cavities Via Equivalent Fluid Model

A Hybrid Finite Element Method – Kirchhoff Approximation Method for Modeling Acoustic Scattering from an Underwater Vehicle Model with Alberich Coatings with Periodic Internal Cavities

Underwater sound scattering and absorption by a coated infinite plate with a distributed inhomogeneity.

Low-Frequency Acoustic Absorption of Viscoelastic Coating with Various Shapes of Scatterers

An equivalent parameter method based on acoustic performances for predicting sound target strength

The underwater acoustic scattering characteristics of cylindrical shells: Effect of a coating made of micro floating raft arrays

Acoustic scattering from a hemicapped cylindrical shell with substructures

Research on Outside Sound Field Simulation of Shell Based on FEM

A Novel Technique for the Measurement of the Acoustic Properties of a Thin Linear-Viscoelastic Layer Using a Planar Ultrasonic Transducer

Anechoic Effect of Coating Covered on Target Submerged in Typical Shallow-water Waveguides

Analysis of underwater sound absorption of visco-elastic composites coating containing micro-spherical glass shell

Sound absorption mechanism of underwater anechoic coating with spherical cavities

On the Accuracy and Optimization Application of an Axisymmetric Simplified Model for Underwater Sound Absorption of Anechoic Coatings

Sound Absorption Coefficient Measurement and Correction of Acoustic Coating Based on Impedance Experiment

Dynamical Mechanical Property of Viscoelastic Materials and Its Effect on Acoustic Absorption of Coating

Analyzing Acoustic Scattering of Elastic Objects Using Coupled FEM-BEM Technique

Improved Equivalent Source Method to Predict Sound Scattered by Solid Surfaces

Theory and numerical method for the effects of hydrostatic pressure on sound absorption of underwater acoustic coatings with air cavities

Homogenization of an Acoustic Coating with a Steel Backing Subject to an Obliquely Incident Sound