Sulfur Vacancies in Co9S8−x/N-doped Graphene Enhancing the Electrochemical Kinetics for High-Performance Lithium–sulfur Batteries

Yi-Hua Song

DOI: https://doi.org/10.1039/d1ta00800e

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:Acceleration by pits: the kinetics of the catalytic conversion of lithium polysulfide in lithium–sulfur batteries are effectively enhanced by sulfur vacancies.

What problem does this paper attempt to address?

Sulfur vacancies in Co 9 S 8−x /N-doped graphene enhancing the electrochemical kinetics for high-performance lithium–sulfur batteries

Hao-Jie Li,Yi-Hua Song,Kai Xi,Wei Wang,Sheng Liu,Guo-Ran Li,Xue-Ping Gao

DOI: https://doi.org/10.1039/d1ta00800e

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:Acceleration by pits: the kinetics of the catalytic conversion of lithium polysulfide in lithium–sulfur batteries are effectively enhanced by sulfur vacancies.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Enhanced catalysis LiS3 of radical-to-polysulfide interconversion via increased sulfur vacancies in lithium-sulfur batteries

Rui Xu,Hongan Tang,Yuanyuan Zhou,Fangzheng Wang,Hongrui Wang,Minhua Shao,Cunpu Li,Zidong Wei

DOI: https://doi.org/10.1039/d2sc01353c

IF: 8.4

2022-01-01

Chemical Science

Abstract:The practical application of lithium-sulfur (Li-S) batteries is seriously hindered by severe lithium polysulfide (LiPS) shuttling and sluggish electrochemical conversions. Herein, the Co9S8/MoS2 heterojunction as a model cathode host material is employed to discuss the performance improvement strategy and elucidate the catalytic mechanism. The introduction of sulfur vacancies can harmonize the chemisorption of the heterojunction component. Also, sulfur vacancies induce the generation of radicals, which participate in a liquidus disproportionated reaction to reduce the accumulation of liquid LiPSs. To assess the conversion efficiency from liquid LiPSs to solid Li2S, a new descriptor calculated from basic cyclic voltammetry curves, nucleation transformation ratio, is proposed.
Selective Adsorption and Electrocatalysis of Polysulfides Through Hexatomic Nickel Clusters Embedded in N-Doped Graphene Toward High-Performance Li-S Batteries

Jiapeng Ji,Ying Sha,Zeheng Li,Xuehui Gao,Teng Zhang,Shiyu Zhou,Tong Qiu,Shaodong Zhou,Liang Zhang,Min Ling,Yanglong Hou,Chengdu Liang

DOI: https://doi.org/10.34133/2020/5714349

IF: 11

2020-01-01

Research

Abstract:The shuttle effect hinders the practical application of lithium-sulfur (Li-S) batteries due to the poor affinity between a substrate and Li polysulfides (LiPSs) and the sluggish transition of soluble LiPSs to insoluble Li 2 S or elemental S. Here, we report that Ni hexatomic clusters embedded in a nitrogen-doped three-dimensional (3D) graphene framework (Ni-N/G) possess stronger interaction with soluble polysulfides than that with insoluble polysulfides. The synthetic electrocatalyst deployed in the sulfur cathode plays a multifunctional role: (i) selectively adsorbing the polysulfides dissolved in the electrolyte, (ii) expediting the sluggish liquid-solid phase transformations at the active sites as electrocatalysts, and (iii) accelerating the kinetics of the electrochemical reaction of multielectron sulfur, thereby inhibiting the dissolution of LiPSs. The constructed S@Ni-N/G cathode delivers an areal capacity of 9.43 mAh cm -2 at 0.1 C at S loading of 6.8 mg cm -2 , and it exhibits a gravimetric capacity of 1104 mAh g -1 with a capacity fading rate of 0.045% per cycle over 50 cycles at 0.2 C at S loading of 2.0 mg cm -2 . This work opens a rational approach to achieve the selective adsorption and expediting of polysulfide transition for the performance enhancement of Li-S batteries.
Synergetic Anion Vacancies and Dense Heterointerfaces into Bimetal Chalcogenide Nanosheet Arrays for Boosting Electrocatalysis Sulfur Conversion

Zhengqing Ye,Ying Jiang,Li Li,Feng Wu,Renjie Chen

DOI: https://doi.org/10.1002/adma.202109552

IF: 29.4

2022-02-20

Advanced Materials

Abstract:Vacancy and interface engineering are regarded as effective strategies to modulate the electronic structure and enhance the activity of metal chalcogenides. However, the practical application of metal chalcogenides in lithium-sulfur (Li-S) batteries is limited by their low conductivity, rapid decline in catalytic activity, and large volume variation during the discharging/charging process. Herein, bimetal sulfide (CoZn-S) nanosheet arrays with sulfur vacancies and dense heterointerfaces are proposed to accelerate sulfur conversion and improve the performance of Li-S batteries. Systematic investigations reveal that sulfur-vacancy and build-in interfacial field in CoZn-S facilitate the electron transfer and regulate the electronic structure. The well-designed 3D nanosheet array structures shorten the ion-transport pathway and inhibit the volume fluctuation of CoZn-S during the electrocatalysis process. Density functional theory studies confirm that the built-in interfacial field and sulfur vacancy can promote the thermodynamic formation and decomposition of Li2 S, thus improving their intrinsic activity.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Phosphorus Vacancies as Effective Polysulfide Promoter for High‐Energy‐Density Lithium–Sulfur Batteries

Rui Sun,Yu Bai,Zhe Bai,Lin Peng,Min Luo,Meixiu Qu,Yangchen Gao,Zhenhua Wang,Wang Sun,Kening Sun

DOI: https://doi.org/10.1002/aenm.202102739

IF: 27.8

2022-02-10

Advanced Energy Materials

Abstract:Lithium–sulfur batteries have aroused great interest in the context of rechargeable batteries, while the shuttle effect and sluggish conversion kinetics severely handicap their development. Defect engineering, which can adjust the electronic structures of electrocatalyst, and thus affect the surface adsorption and catalytic process, has been recognized as a good strategy to solve the above problems. However, research on phosphorus vacancies has been rarely reported, and how phosphorus vacancies affect battery performance remains unclear. Herein, CoP with phosphorus vacancies (CoP‐Vp) is fabricated to study the enhancement mechanism of phosphorus vacancies in Li–S chemistry. The derived CoP‐Vp features a low Co‐P coordination number and the introduced phosphorus vacancies mainly exist in the form of clusters. The obtained CoP‐Vp can reinforce the affinity to lithium polysulfides (LiPSs) and thus the shuttle effect can be restrained. In addition, the reduced reaction energy barriers and the promoted diffusion of Li+ can accelerate redox kinetics. Electrochemical tests and in situ Raman results confirm the advantages of phosphorus vacancies. The S/CNT‐CoP‐Vp electrode presents outstanding cycling performance and achieves a high capacity of 8.03 mAh cm−2 under lean electrolyte condition (E/S = 5 μLE mg−1S). This work provides a new insight into improving the performance of Li–S batteries through defect engineering. Cobalt phosphide with phosphorus vacancies is designed and used as a sulfur host for Li–S batteries. The introduction of phosphorus vacancies can adjust electronic structures, and thus enhance the chemical affinity to lithium polysulfides and accelerate the redox kinetics for polysulfide conversions. The batteries can exhibit excellent electrochemical performance under high sulfur loadings and lean electrolyte conditions.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Vacancy engineering in Co-doped CuS1-x with fast Electronic/Ionic migration kinetics for efficient Lithium-Ion batteries

Fan Yang,Liangliang Xu,Ying Gao,Ying Gao,Changdong Chen,Caiyun Lu,Fangfang Wang

DOI: https://doi.org/10.1016/j.jcis.2023.03.070

IF: 9.9

2023-07-01

Journal of Colloid and Interface Science

Abstract:Slow Li ion diffusion kinetics and disordered migration of electrons are two most crucial obstacles to be resolved in electrode material design for higher rate capability of Li-ion batteries. Herein, the Co-doped CuS1-x with abundant high active S vacancies is proposed to accelerate the electronic and ionic diffusion during the energy conversion process, because contraction of Co-S bond can cause the expansion of atomic layer spacing, thus promoting the Li ion diffusion and directional electron migration parallel to the Cu2S2 plane, and also induce the increasing of active sites to improve the Li+ adsorption and electrocatalytic conversion kinetics. Especially, the electrocatalytic studies and plane charge density difference simulations demonstrate that electron transfer near the Co site is more frequent, which is conducive to more rapid energy conversion and storage. Those S vacancies formed by Co-S contraction in CuS1-x structure obviously increase Li ion adsorption energy in Co-doped CuS1-x to 2.21 eV, higher than the 2.1 eV for CuS1-x and 1.88 eV for CuS. Taking these advantages, the Co-doped CuS1-x as anode of Li-ion batterie shows an impressive rate capability of 1309 mAh·g−1 at 1A g−1, and long cycling stability (retaining 1064 mAh·g−1 capacity after 500 cycles). This work provides new opportunities for the design of high-performance electrode material for rechargeable metal-ion batteries.

chemistry, physical
Co,N-co-doped graphene sheet as a sulfur host for high-performance lithium–sulfur batteries

Haili Zhao,Peng Chen,Yu Fan,Junkai Zhang,HongSheng Jia,Jianxun Zhao,Heng Liu,Xin Guo,Xinwei Wang,Wanqiang Liu

DOI: https://doi.org/10.1039/d1ra08566b

IF: 4.036

2022-01-01

RSC Advances

Abstract:Design of two-dimensional graphene with dispersed Co–N catalysts as a multifunctional S holding material in Li–S batteries to improve the retention of LiPSs and accelerate the reaction kinetics.

chemistry, multidisciplinary
Full Potential Catalysis of Co 0.4 Ni 1.6 P-V/CNT with Phosphorus Vacancies for Li 2 S 1-2 Deposition/Decomposition and S 8 /Li 2 S n (3 ≤ n ≤ 8) Conversion in Li-S Batteries

Guoqing Zhang,Luluan Feng,Jingxian Yu,Shengping Wang

DOI: https://doi.org/10.1021/acsami.3c10530

IF: 9.5

2023-10-17

ACS Applied Materials & Interfaces

Abstract:The slow kinetics of polysulfide conversions hinders the commercial progress of Li-S batteries. The introduction of high-efficiency catalysts accelerates heterogeneous reactions and enhances the utilization of S. The full potential of the Co(0.4)Ni(1.6)P-V/CNT-modified separator catalyzes the all-process reactions of the S electrode and increases the rates and cycling lives of the batteries. The two-site synergistic effect of Co(0.4)Ni(1.6)P-V/CNT regulates the catalytic activity, and the...

materials science, multidisciplinary,nanoscience & nanotechnology
Defect‐engineered Sulfur Vacancy Modified NiCo2S4‐x Nanosheet Anchoring Polysulfide for Improved Lithium Sulfur Batteries (Small 36/2023)

Xin Dai,Xu Wang,Guangjun Lv,Zhen Wu,Yan Liu,Junjie Sun,Yongning Liu,Yuanzhen Chen

DOI: https://doi.org/10.1002/smll.202370290

IF: 13.3

2023-09-06

Small

Abstract:Improved Lithium Sulfur Batteries NiCo2S4‐x nanoplates with sulfur vacancy are grown on the flexible carbon fiber paper as the interlayer of the Li‐S battery. The 2D nanoplate morphology of NiCo2S4‐x increases the effective adsorption sites for lithium polysulfides (LiPSs), and the Lewis acidic sulfur vacancy could regulate the precipitation and conversion behaviors of LiPSs, resulting in improved conversion kinetics. More details can be found in article number 2302267 by Yuanzhen Chen and co‐workers.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Rationalizing the Impact of Oxygen Vacancy on Polysulfide Conversion Kinetics for Highly Efficient Lithium-Sulfur Batteries

Ya Song,Huan Li,Junfeng Li,Jinyu An,Jiao-Jing Shao,Guangmin Zhou

DOI: https://doi.org/10.1016/j.jechem.2023.08.003

2023-01-01

Abstract:The "shuttle effect" of lithium polysulfides (LiPSs) is a huge challenge for practical use of high-energydensity lithium-sulfur (Li-S) batteries, and one of the main reasons is the sluggish kinetics of sulfur conversion. Metal oxides are able to expedite the sulfur electrochemistry, and the structural defects enhance the adsorption-conversion ability of metal oxides for polysulfides. However, a significant research gap still remains regarding the relationship between the oxygen vacancy concentration and the adsorptivecatalytic performance of metal oxides. Herein, we establish a correlation between oxygen vacancy concentration and adsorptive-catalytic properties by using tungsten oxide (WOx) as model catalysts. It is revealed that high-concentration oxygen vacancy is beneficial for enhancing the binding between tungsten oxide and LiPSs, reducing the energy barrier of Li2S decomposition, and promoting polysulfide conversion kinetics. Consequently, the Li-S batteries using the tungsten oxide with high-concentration oxygen vacancies deliver high initial discharge capacity of 1169 mA h g-1 at 0.2 C and 865 mA h g-1 at 2 C, low attenuation rate of 0.064% per cycle over 1100 cycles at 2 C. With a high sulfur area loading of 5.34 mg cm-2, the Li-S batteries still exhibit high initial gravimetric capacity of 982 mA h g-1 at 0.1 C and areal capacity of 5.92 mA h cm-2. This work promotes the feasibility of defect engineering on metal oxides as an effective mean to enhance the practicality of Li-S batteries.(c) 2023 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by ELSEVIER B.V. and Science Press. All rights reserved.
Confined Co9S8 nanocrystals into N/S-Co-doped Carbon Nanofibers as A Chainmail-like Electrocatalyst for High-performance Lithium-Sulfur Batteries with High Sulfur Loading

Wei Zhou,Minzhe Chen,Dengke Zhao,Qikai Wu,Jiacheng Dan,Chuheng Zhu,Wanwen Qiu,Wen Lei,Li-Jun Ma,Ligui Li

DOI: https://doi.org/10.1016/j.jcis.2022.04.042

IF: 9.9

2022-04-01

Journal of Colloid and Interface Science

Abstract:Accelerating phase transposition efficiency of lithium polysulfides (LiPSs) to L2S and hampering the solution of LiPSs are the keys to stabilizing lithium-sulfur (Li-S) batteries. Hence, the sulfiphilic ultrafine Co9S8 nanoparticles embedded lithiophilic N, S co-doping carbon nanofibers (Co9S8/NSCNF) are prepared via the dual-template method, which are then used as sulfur host in Li-S batteries. Particularly, the double active sites (Co9S8 and N, S) in Co9S8/NSCNF are prone to form "Co-S", "Li-O" or "Li-N" bonds, and then simultaneously improving the chemisorption and interface transposition capability of LiPSs. In case of the Co9S8/NSCNF composites with high sulfur loading of 89% are employed as cathode, the cell possesses optimized "sulfiphilicity" and "lithiophilicity", which achieves remarkable sulfur electrochemistry, including outstanding reversibility of 816.8 mAh g-1 over 500 cycles at 1.0 C, excellent rate property of 742.2 mAh g-1at 5.0 C, and long-term cycling with a low attenuation of 0.011% per cycle over 1800 cycles at 3.0 C. Impressively, a remarkable areal capacity of 11.51 mAh cm-2 is retained under the sulfur loading of 15.3 mg cm-2 for 50 cycles. This research will deepen the understanding of the complex LiPSs interface transposition procedure and provide new ideas for the design of new host materials.

chemistry, physical
In situ induced cation-vacancies in metal sulfides as dynamic electrocatalyst accelerating polysulfides conversion for Li-S battery

Rongrong Li,Hao Sun,Caiyun Chang,Yuan Yao,Xiong Pu,Wenjie Mai,Rongrong Li,Hao Sun,Caiyun Chang,Yuan Yao,Xiong Pu,Wenjie Mai

DOI: https://doi.org/10.1016/j.jechem.2022.08.015

IF: 13.1

2022-12-01

Journal of Energy Chemistry

Abstract:Cation vacancy engineering is considered to be one of the effective methods to solve the issues of shuttling and sluggish redox kinetics of LiPSs owing to the intrinsic tunability of electronic structure. However, cation vacancies are few studied in the Li-S realm due to their complex and rigid preparation methods. In this work, one-step pyrolysis is reported to in situ introduce Fe-vacancies into iron sulfide (Fe0.96S) as a sulfur host. For this host structure, Fe0.96S is first employed as an adsorbent and catalyst in Li-S system. During the carbonization process, a tight contact structure of Fe0.96S crystal and carbon network (Fe0.96S@C) is in situ constructed, and the carbon layer as a conductor provides smooth electrons transfer pathways for redox reactions. Meanwhile, due to the introduction of Fe-vacancies in FeS crystal, the adsorption capability and catalytic effect for LiPSs have been substantially enhanced. Moreover, the presence of Fe0.96S crystal favors the mobility of electron and diffusion of Li+, which is revealed by the experiments and theoretical calculations. Through synergy respective advantages effect of Fe0.96S and carbon, the Fe0.96S@C-S cathode delivers high-rate capability at 5.0 C and stable long-life performance. Even under a high sulfur loading of 3.5 mg/cm2, the durable cyclic stability is still exhibited with the capacity retention of 93% over 400 cycles at 1.0 C, and the coulombic efficiency is ≥98%. Noting that this strategy greatly simplifies the synthetic process of currently known cation-vacancy materials and furnishes a universal mentality for designing both divinable and astonishing new cation-vacancy materials.

chemistry, physical,engineering, chemical, applied,energy & fuels
Single-Atom Cobalt Catalyst with Boron and Nitrogen Codoped Graphene (Co-BN-G) Enables Adsorption and Catalytic Conversion of Polysulfides for High-Performance Lithium-Sulfur Batteries

Furan Wang,Tiancheng Wang,Zehao Shi,Shengrui Cui,Ning Wang,Guohong Kang,Ge Su,Wei Liu,Yongcheng Jin

DOI: https://doi.org/10.1021/acsami.4c09591

IF: 9.5

2024-10-09

ACS Applied Materials & Interfaces

Abstract:In lithium-sulfur batteries, the shuttling effect and sluggish redox conversion of soluble polysulfides lead to unsatisfactory sulfur utilization and capacity retention. In this research, we used a one-pot hydrothermal method to prepare graphene with single-atom Co and B, N codoped as a sulfur host in Li-S batteries, thereby suppressing the shuttling effect and facilitating the redox conversion of lithium polysulfides (LiPSs). A series of characterizations demonstrated that dual doping of B and...

materials science, multidisciplinary,nanoscience & nanotechnology
TiN nanocrystal anchored on N-doped graphene as effective sulfur hosts for high-performance lithium-sulfur batteries

Wenmiao Chen,Hongchang Jin,Shuai Xie,Huanyu Xie,Junfa Zhu,Hengxing Ji,Li-Jun Wan

DOI: https://doi.org/10.1016/j.jechem.2020.05.007

IF: 13.1

2021-03-01

Journal of Energy Chemistry

Abstract:Lithium-sulfur (Li-S) batteries have become prospective candidates for next-generation energy storage owing to the high energy density and low cost. However, the sluggish kinetics of the electrochemical reaction and shuttle effect result in a rapid capacity decay. Herein, a titanium nitride nanocrystal/N-doped graphene () composite is developed to host elemental sulfur. The TiN nanoparticles decorated on graphene sheets attract Li polysulfides (LiPSx) and catalyze the electrochemical reduction and oxidation of LiPSx in the discharge and charge processes, respectively. These two effects effectively restrain the dissolution of the LiPSx and accelerate the electrochemical reactions, thereby, alleviating the shuttle effect. As a result, the cathode composed of /S delivers a remarkable reversible capacity (1390 mA h g-1 at 0.1 C) and excellent cycling performance (730 mA h g-1 after 300 cycles). We believe that this work can bring some inspiration for designing high-performance Li-S batteries.

chemistry, physical,engineering, chemical, applied,energy & fuels
Accelerating sulfur conversion kinetics via CoS2–MgS heterostructure for lithium sulfur batteries

Xinliang Men,Teng Deng,Jiangxuan Che,Juan Wang

DOI: https://doi.org/10.1039/d4ta06086e/v1/review2

IF: 11.9

2024-11-04

Journal of Materials Chemistry A

Abstract:The ultra-high theoretical specific capacity of sulfur (1672 mA h g −1 ) has attracted researchers to intensely explore lithium–sulfur batteries. However, the shuttle effect of polysulfides and the slow conversion kinetics of sulfur have hindered its advancement. Herein, we synthesized CoS 2 –MgS heterostructure catalysts deposited on acetylene black nanoparticles, which were used as separator coatings to improve the performance of lithium–sulfur batteries. Various experiments, such as XPS, Tafel curves, Li 2 S 6 symmetric cells, Li 2 S deposition, and DFT calculations, identified the advantages of the CoS 2 –MgS heterostructure: rapid polar adsorption of CoS 2 to polysulfides through partial oxidation of Co 2+ to Co 3+ and fast lithium-ion migration in MgS. The coin cells delivered an initial discharge capacity of 573.4 mA h g −1 and cycled stably for 600 cycles at 5C with a capacity decay rate of 0.08% per cycle. The battery retained a specific capacity of 545.5 mA h g −1 (4.3 mA h cm −2 ) after 100 cycles at 0.1C with a sulfur loading of 7.87 mg cm −2 . In addition, laminated pouch cells with a sulfur content of 311.5 mg exhibited excellent cycle stability, maintaining 768.3 mA h g −1 (239 mA h) after 80 cycles. This work provides ideas for finding novel composites that have both fast lithium-ion migration and strong polar adsorption for sulfur conversion while providing a reference for pouch battery research.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Defective VSe2-Graphene Heterostructures Enabling in Situ Electrocatalyst Evolution for Lithium-Sulfur Batteries.

Haina Ci,Jingsheng Cai,Hao Ma,Zixiong Shi,Guang Cui,Menglei Wang,Jia Jin,Nan Wei,Chen Lu,Wen Zhao,Jingyu Sun,Zhongfan Liu

DOI: https://doi.org/10.1021/acsnano.0c05030

IF: 17.1

2020-01-01

ACS Nano

Abstract:Electrocatalysts remain vitally important for the rational management of intermediate polysulfides (LiPSs) in the realm of Li-S batteries. In terms of transition-metal-based candidates, in situ evolution of electrocatalysts in the course of an electrochemical process has been acknowledged; nevertheless, consensus has not yet been reached on their real functional states as well as catalytic mechanisms. Herein, we report an all-chemical vapor deposition design of the defective vanadium diselenide (VSe2)-vertical graphene (VG) heterostructure on carbon cloth (CC) targeting a high-performance sulfur host. The electrochemistry induces the sulfurization of VSe2 to VS2 at Se vacancy sites, which propels the adsorption and conversion of LiPSs. Accordingly, the VSe2-VG@CC/S electrode harvests an excellent cycling stability at 5.0 C with a capacity decay of only 0.039% per cycle over 800 cycles, accompanied by a high areal capacity of 4.9 mAh cm-2 under an elevated sulfur loading of 9.6 mg cm-2. Theoretical simulation combined with operando characterizations reveals the key role played by the Se vacancy with respect to the electrocatalyst evolution and LiPS regulation. This work offers insight into the rational design of heterostructure sulfur hosts throughout defect engineering.
Engineering single-atom catalysts as multifunctional polysulfide and lithium regulators toward kinetically accelerated and durable lithium-sulfur batteries

Donghua Wang,Kaikai Ma,Jiamao Hao,Wenyuan Zhang,Haofeng Shi,Chengdeng Wang,Zhihao Xiong,Zhiming Bai,Fu-Rong Chen,Junjie Guo,Bingshe Xu,Xiaoqin Yan,Yousong Gu

DOI: https://doi.org/10.1016/j.cej.2023.143182

IF: 15.1

2023-04-30

Chemical Engineering Journal

Abstract:Developing electrocatalyst to ameliorate the shuttling effect of lithium polysulfides (LiPSs), sluggish sulfur redox reaction kinetics and the rampant dendrite growth is of paramount importance for lithium-sulfur (Li-S) batteries. Yet still, the utilization of the most mainstream traditional metal electrocatalytic nanoparticles is far below expectation. Herein, we engineer an exclusive single-atom catalyst with planar Co-N 4 coupling of nitrogen-doped graphene mesh (SA-Co/NGM) to achieve exceptional atom utilization efficiency for catalytic conversion of LiPSs. High surface area and ultra-thin two-dimensional texture can not only accommodate high concentration monodispersed lithiophilic atomic Co sites, but also guarantee homogenize high-flux Li ion transport, alleviating the formation of Li-dendrites. Critically, the maximized exposure of Co-N 4 as a regulator in sulfur electrochemistry can conspicuously suppress the shuttle effect and accelerate bidirectional sulfur redox kinetics via electron delocalization, as demonstrated by a judicious combination of electro-kinetic analysis, in situ spectroscopy and density functional theory (DFT) computations. As expected, the batteries based on a SA-Co/NGM modified separator achieve an ultrahigh rate capability, exceptionally long cycle life and a distinguished favorable areal capacity under high sulfur loading. This work provides a rational design of single-atom catalysts for kinetics-boosted electrocatalysis towards long-lasting Li-S batteries.

engineering, chemical, environmental
Quantitative defect regulation of heterostructures for sulfur catalysis toward fast and long lifespan lithium-sulfur batteries

Saisai Qiu,Xinqi Liang,Shuwen Niu,Qingguo Chen,Gongming Wang,Minghua Chen

DOI: https://doi.org/10.1007/s12274-022-4453-9

IF: 9.9

2022-06-08

Nano Research

Abstract:The advancement of lithium-sulfur (Li-S) batteries is severely retarded by lithium polysulfides (LiPSs) shuttling behavior and sluggish redox kinetics. Herein, the heterogeneous composite with defective Bi 2 Se 3− x nanosheets and porous nitrogen-doped carbon (Bi 2 Se 3− x /NC) is prepared by selenizing bismuth metal-organic frameworks as a multifunctional sulfur host. The highly efficient immobilization-conversion on LiPSs is realized by the synergistic effect of structure construction strategy and defect engineering. It is found that Bi 2 Se 3− x with the suitable amount of selenium vacancies achieves the best electrochemical performance due to the advantages of its structure and composition. These results confirm the intrinsic correlation between defects and catalysis, which are revealed by computational and experimental studies. Due to these superiorities, the developed sulfur electrodes exhibited admirable stability and a fairly lower capacity decay rate of approximately 0.0278% per cycle over 1,000 cycles at a 3 C rate. Even at the high sulfur loading of 6.2 mg·cm −2 , the cathode still demonstrates a high discharge capacity of 455 mAh·g −1 at 1 C. This work may enlighten the development of mechanism investigation and design principles regarding sulfur catalysis toward high-performance Li-S batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Selenium vacancies enable efficient immobilization and bidirectional conversion acceleration of lithium polysulfides for advanced Li-S batteries

Yuanchang Li,Zhenfang Zhou,Yong Li,Zhonghua Zhang,Xiaosong Guo,Jing Liu,Changming Mao,Zhenjiang Li,Guicun Li

DOI: https://doi.org/10.1007/s12274-022-4552-7

IF: 9.9

2022-06-04

Nano Research

Abstract:Heterostructures composed of oxides and sulfides (nitrides or carbides) show great potential as sulfur host additives because of the strong adoptability of oxides and catalytic capability of sulfides towards the notorious lithium polysulfides (LiPSs). However, the migration and conversion pathway of LiPSs is seriously confined at a localized interface with inadequate active sites. In this work, the introduction of selenium vacancies into VSe 2− x has been demonstrated to successfully synergize the adsorbability and catalytic reactions of LiPSs at an integrated functional surface. The N-doped carbon nanosheets-assembled flower architectures embedded with selenium vacancy-rich VSe 2− x and partial vanadium oxides have been controllably synthesized and employed as the cathode additives for lithium-sulfur (Li-S) batteries. Both the experiments and first-principle calculations reveal their strong adsorption to LiPSs and their bidirectional catalytic functionality towards the conversion between S 8 and Li 2 S. As expected, the charge and discharge kinetics of VSe 2− x containing sulfur cathodes is fundamentally improved (an outstanding rate capabilitiy with 693.7 mAh·g −1 at 2 C, a remarkable long-term cyclability within 1,000 cycles at 2 C with S loading 2.27 mg·cm −2 , and an excellent areal capacity with 3.44 mAh·cm −2 within 100 cycles at 0.5 C). This work presents an effective resolution to couple the adsorbability and catalytic reactions of LiPSs at the material design perspective, and the insights on bidirectional catalytic functionality are of vital to develop functional materials for advanced Li-S batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Dual‐Defect Engineering of Bidirectional Catalyst for High‐Performing Lithium‐Sulfur Batteries

Xiaoya Zhou,Yuchen Cui,Xin Huang,Xin Wu,Hao Sun,Shaochun Tang

DOI: https://doi.org/10.1002/smll.202301545

IF: 13.3

2023-06-08

Small

Abstract:A double‐defect engineering strategy for preparing Co‐doped FeP catalyst containing P vacancies on MXene, which effectively improves the bidirectional redox of Li2S. The results of experiments and density functional theory (DFT) confirm that P vacancy accelerates Li2S nucleation via increased unsaturated sites, and Co doping generates local electric field to reduce the reaction energy barrier and accelerate Li2S dissolution. Practical applications of lithium‐sulfur (Li‐S) batteries have been hindered by sluggish reaction kinetics and severe capacity decay during charge‐discharge cycling due to the notorious shuttle effect of polysulfide and the unfavored deposition and dissolution of Li2S. Herein, to address these issues, a double‐defect engineering strategy is developed for preparing Co‐doped FeP catalyst containing P vacancies on MXene, which effectively improves the bidirectional redox of Li2S. Mechanism analysis indicates that P vacancy accelerates Li2S nucleation via increased unsaturated sites, and Co doping generates local electric field to reduce the reaction energy barrier and accelerate Li2S dissolution. MXene provides highly conductive channels for electron transport, and effectively captures polysulfide. The double‐defect catalyst enables an impressive reversible specific capacity of 1297.9 mAh g−1 at 0.2 C, and excellent rate capability of 726.5 mAh g−1 at 4 C. Remarkably, it demonstrates excellent cycling stability with capacity retention of 533.3 mAh g−1 after 500 cycles at 2 C. The results can unlock the double‐defect engineering of vacancy induction and heteroatomic doping towards practical Li‐S batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

Sulfur Vacancies in Co9S8−x/N-doped Graphene Enhancing the Electrochemical Kinetics for High-Performance Lithium–sulfur Batteries

Sulfur vacancies in Co 9 S 8−x /N-doped graphene enhancing the electrochemical kinetics for high-performance lithium–sulfur batteries

Enhanced catalysis LiS<sub>3</sub> of radical-to-polysulfide interconversion <i>via</i> increased sulfur vacancies in lithium-sulfur batteries

Selective Adsorption and Electrocatalysis of Polysulfides Through Hexatomic Nickel Clusters Embedded in N-Doped Graphene Toward High-Performance Li-S Batteries

Synergetic Anion Vacancies and Dense Heterointerfaces into Bimetal Chalcogenide Nanosheet Arrays for Boosting Electrocatalysis Sulfur Conversion

Phosphorus Vacancies as Effective Polysulfide Promoter for High‐Energy‐Density Lithium–Sulfur Batteries

Vacancy engineering in Co-doped CuS1-x with fast Electronic/Ionic migration kinetics for efficient Lithium-Ion batteries

Co,N-co-doped graphene sheet as a sulfur host for high-performance lithium–sulfur batteries

Full Potential Catalysis of Co 0.4 Ni 1.6 P-V/CNT with Phosphorus Vacancies for Li 2 S 1-2 Deposition/Decomposition and S 8 /Li 2 S n (3 ≤ n ≤ 8) Conversion in Li-S Batteries

Defect‐engineered Sulfur Vacancy Modified NiCo2S4‐x Nanosheet Anchoring Polysulfide for Improved Lithium Sulfur Batteries (Small 36/2023)

Rationalizing the Impact of Oxygen Vacancy on Polysulfide Conversion Kinetics for Highly Efficient Lithium-Sulfur Batteries

Confined Co9S8 nanocrystals into N/S-Co-doped Carbon Nanofibers as A Chainmail-like Electrocatalyst for High-performance Lithium-Sulfur Batteries with High Sulfur Loading

In situ induced cation-vacancies in metal sulfides as dynamic electrocatalyst accelerating polysulfides conversion for Li-S battery

Single-Atom Cobalt Catalyst with Boron and Nitrogen Codoped Graphene (Co-BN-G) Enables Adsorption and Catalytic Conversion of Polysulfides for High-Performance Lithium-Sulfur Batteries

TiN nanocrystal anchored on N-doped graphene as effective sulfur hosts for high-performance lithium-sulfur batteries

Accelerating sulfur conversion kinetics via CoS2–MgS heterostructure for lithium sulfur batteries

Defective VSe2-Graphene Heterostructures Enabling in Situ Electrocatalyst Evolution for Lithium-Sulfur Batteries.

Engineering single-atom catalysts as multifunctional polysulfide and lithium regulators toward kinetically accelerated and durable lithium-sulfur batteries

Quantitative defect regulation of heterostructures for sulfur catalysis toward fast and long lifespan lithium-sulfur batteries

Selenium vacancies enable efficient immobilization and bidirectional conversion acceleration of lithium polysulfides for advanced Li-S batteries

Dual‐Defect Engineering of Bidirectional Catalyst for High‐Performing Lithium‐Sulfur Batteries