Abstract:The global energy demand is continuously rising, requiring the search for attractive and low-emission energy generation options. Molten Salt Reactors (MSRs) have emerged as a promising solution in the Generation IV roadmap due to their inherent safety features and fuel flexibility. Operating at high temperatures, MSRs efficiently convert heat into electricity and offer potential applications beyond energy production. Nevertheless, challenges related to materials, fuel management, commercial viability, and regulatory acceptance persist. This study focuses on the Single-fluid Double-zone Thorium-based Molten Salt Reactor (SD-TMSR), an advanced nuclear design utilizing 232Th as the primary fuel source. Four initial fissile materials were examined for fuel cycle flexibility: conventional recovery uranium (RU) with 233U, enriched uranium (EU) with 235U, reprocessed plutonium (RP), and reprocessed plutonium/minor actinides (RA) matrices. Using the MCNP6 code, a comprehensive model of the SD-TMSR core was developed to study the performance of proposed fuels during a reactor cycle. The analysis encompassed neutronic parameters, reactivity, neutron flux profile, and fuel evolution. The findings indicated EU, RP, and RA fuels as viable alternatives to RU, exhibiting efficient neutron capture scenarios and reduced nuclear waste production. The study verified the reliability of the developed model by comparing main neutronic parameters with literature data, confirming their statistical equivalence. The proposed fuels, EU, RP, and RA, exhibit subcritical characteristics compared to conventional RU fuel. To improve reactor reactivity, the mole percentage of uranium tetrafluoride (UF4) and (TRU)F3 was gradually increased while reducing thorium tetrafluoride (ThF4) proportion. The burnup analysis revealed the changes in isotopes’ concentration during the reactor cycle, and the breeding ratio (BR) indicated that SD-TMSR operates as a converter reactor in the first cycle. Actinides, especially thorium and protactinium, dominated the fuel's activity, while iodine activity was significant for all fuel types. The research provided valuable insights into the proposed fuels’ behavior, offering relevant data for the SD-TMSR's design and operation.

Feasibility Assessment of a Natural-Circulation Salt Irradiation Loop in the Advanced Test Reactor

Modeling of fission and activation products in molten salt reactors and their potential impact on the radionuclide monitoring stations of the International Monitoring System

Electrochemical Sensors and Techniques for Redox Potential and Tritium Transport in a Neutron-Irradiated Molten Flibe Salt Loop

Flow visualization experiments of argon injection in a molten salt natural circulation loop

A Draft Design of a Zero-Power Experiment for Molten Salt Fast Reactor Studies

Radioactive Sodium Chemistry Loop for Activity Transport Studies and Meter Testing

Study on the Coupled Neutronic and Thermal-Hydraulic Characteristics of the New Concept Molten Salt Reactor

Natural Convection With Non-Uniform Heat Generation In Molten Salt Reactor

Radioactive product analysis of a small molten-salt reactor in primary loop

Fuel Cycle Performance of the Wielenga Innovation Static Salt Reactor

Scoping Studies of Reactor Core Parameters in Support of the Abilene Christian University Molten Salt Research Reactor

Development and Experimental Validation of a Heat Transfer Model for Spilled Molten Salt Pools

Preliminary Neutronic and Thermal-Hydraulic Analysis of a 2 MW Thorium-based Molten Salt Reactor with Solid Fuel

On the Dimensions Required for a Molten Salt Zero Power Reactor Operating on Chloride Salts

Radionuclide tracing based in situ corrosion and mass transport monitoring of 316L stainless steel in a molten salt closed loop

Preliminary Study on the Candidate Fuel Salt of Molten Chloride Salt Fast Reactor

A neutronic evaluation of a thorium-based molten salt breeder reactor

Implementation Of Solar Salt Properties Into Ariant And Simulation Of Pressurized Loss Of Forced Circulation In A High Temperature Gas-Cooled Small Modular Reactor

Analysis of the Operational and Safety Features of the In-Core Bubbling System of the Molten Salt Fast Reactor

A comparison of actinide halides for use in molten salt reactor fuels

Optimization of a Primary Heat Exchanger for FLiBe Molten Salt Nuclear Reactor With sCO2 Power System