Abstract:Li metal is considered as the “Holy Grail” of energy storage systems due to its extremely high theoretical specific capacity (3860 mAh g−1), low gravimetric density (0.59 g cm−3), and lowest negative redox potential (−3.040 V vs. standard hydrogen electrode). The bright prospects give rise to worldwide interests in the metallic Li for the next generation energy storage systems, including highly considered rechargeable metallic Li batteries such as Li-O2 and Li-sulfur (Li–S) batteries. However, the formation of Li dendrites induced by inhomogeneous distribution of current density on the Li metal anode and the concentration gradient of Li ions at the electrolyte/electrode interface is a crucial issue that hinders the practical demonstration of high-energy-density metallic Li batteries. A unique nanostructured anode with Li metal distributed in fibrous Li7B6 matrix is proposed as a promising anode to prevent the dendrite growth. The nanostructured anode is with a large specific area, thus rendering a low current density on the Li metal anode. The dendrite growth is effectively inhibited via decreasing the growth velocity of Li deposits and then limiting the final size of deposited Li on the nanostructured matrix, thus leading to the dendrite-free morphology at macroscale. The concentration gradient of Li ions near the anode surface are sharply reduced, because the 3D Li7B6 fibrous structure provides quantities of free space to accommodate electrolyte. To improve the Coulombic efficiency of Li depositing/dissolution, a dual-phase Li metal anode containing polysulfide-induced SEI and nanostructured graphene framework was investigated for Li-S batteries. Free-standing graphene foam provides several promising features as underneath layer for Li anode, including (1) relative larger surface area than 2D substrates to lower the real specific surface current density and the possibility of dendrite growth, (2) interconnected framework to support and recycle dead Li, and (3) good flexibility to sustain the volume fluctuation during repeated incorporation/extraction of Li. The synergy between the LiNO3 and polysulfides provides the feasibility to the formation of robust SEI in an ether-based electrolyte. The efficient in-situ formed SEI-coated graphene structure allows stable Li metal anode with the cycling Coulombic efficiency of ∼97 % with high safety and efficiency performance, which is with a low resistance of 19.65 Ω (29.10 Ω for Cu foil based Li metal anode) and high ion conductivity of 5.42×10-2 mS cm-1 (2.33×10-2 mS cm-1 for Cu foil based Li metal anode). These results indicated that interfacial engineering of nanostructured electrode were a promising strategy to handle the intrinsic problems of Li metal anodes, thus shed a new light toward LMBs, such as Li-S and Li-O2 batteries with high energy density. Reference [1] X. B. Cheng, H. J. Peng, J. Q. Huang, F. Wei, Q. Zhang, Small 2014, 10, 4257 [2] X. B. Cheng, H. J. Peng, J. Q. Huang, R. Zhang, C. Z. Zhao, Q. Zhang, ACS Nano 2015, 9, 6373

The Formation of LiAl5O8 Nanowires from Bulk Li-Al Alloy Enables Dendrite-Free Li Metal Batteries

Metal-organic Framework Nanosheets-Guided Uniform Lithium Deposition for Metallic Lithium Batteries

Dendrite‐Free Lithium Metal Batteries Enabled by Coordination Chemistry in Polymer‐Ceramic Modified Separators

Regulating the Li Nucleation/Growth Behavior via Cu 2 O Nanowire Array and Artificial Solid Electrolyte Interphase toward Highly Stable Li Metal Anode

Nanostructured Li Metal Anode to Inhibit Dendrite Growth in Safe Li-Metal Batteries

Long-term stable Li metal anode enabled by strengthened and protected lithiophilic LiZn alloys

Synergistic Surface and Bulk Engineering with Li-Riched D Ual-Phase Li-Al a Lloy a Node for Rational Regulation of L Ithium Deposition

A lithiophilic and conductive interlayer for dendrite-free lithium metal anodes

Dendrite‐Free Li‐Metal Anode Enabled by Dendritic Structure

Artificial Alloy/Li3N Double-Layer Enabling Stable High-Capacity Lithium Metal Anodes

Thermally Conductive AlN‐Network Shield for Separators to Achieve Dendrite‐Free Plating and Fast Li‐Ion Transport Toward Durable and High‐Rate Lithium‐Metal Anodes

Redistributing Li-ion Flux and Homogenizing Li-metal Growth by N-doped Hierarchically Porous Membranes for Dendrite-Free Lithium Metal Batteries

In Situ Formed Lithiophilic LixNbyO in a Carbon Nanofiber Network for Dendrite-Free Li-Metal Anodes

Stable Li Metal Anode with Protected Interface for High-Performance Li Metal Batteries

High-Capacity, Dendrite-Free, and Ultrahigh-Rate Lithium-Metal Anodes Based on Monodisperse N-Doped Hollow Carbon Nanospheres.

A Dendrite‐Free Lithium Metal Anode Enabled by Designed Ultra‐Thin MgF 2 Nanosheets Encapsulated inside Nitrogen‐Doped Graphene‐Like Hollow Nanospheres

In-situ formation of a nanoscale lithium aluminum alloy in lithium metal for high-load battery anode

In situ formation of a LiF and Li–Al alloy anode protected layer on a Li metal anode with enhanced cycle life

In Situ Formed Lithiophilic Li x Nb y O in a Carbon Nanofiber Network for Dendrite-Free Li-Metal Anodes

General Fabrication of Robust Alloyed Metal Anodes for High-Performance Metal Batteries

Solid-Solution-Based Li-Mg Alloy for Highly Stable Lithium Metal Anode