Abstract:The best mechanical properties of 3D‐printed CF/PA6 were obtained by varying four printing parameters and using heat press processing. The inherent defects of the layer‐by‐layer manufacturing process limit the mechanical performance of 3D‐printed composite parts. This paper explores a process optimization method for continuous fiber composites 3D printing to improve the mechanical performance of 3D‐printed CF/PA6 (Carbon Fiber/Nylon 6) parts. First, the effects of printing temperature, printing speed, layer thickness, and side step on the mechanical performance of 3D‐printed CF/PA6 were studied by conducting variable parameter printing experiments. All optimal printing parameters for CF/PA6 were obtained, and their impact mechanisms were analyzed. Second, the coupling effect of temperature and pressure of post‐processing reduced the internal voids of 3D‐printed CF/PA6 and improved its mechanical properties. The influence mechanism of the coupling effect of temperature and pressure was summarized, and the optimal post‐processing parameters applicable to CF/PA6 were obtained. Based on the above process optimization, the fiber volume content of the printed CF/PA6 reached 41.05%, and the bending strength and elastic modulus reached 651.54 MPa and 79.08 GPa, which were 209.05% and 179.53% higher than those before optimization. Moreover, the tensile strength and elastic modulus reached 730 MPa and 29.23GPa, which were 98.10% and 81.10% higher than those before optimization. The experimental results give a positive validation of the effectiveness and feasibility of the proposed methodology. Highlights The effects of printing temperature, printing speed, layer thickness, and side step on the mechanical properties of 3D‐printed CF/PA6 were investigated. The optimal printing parameters applicable to CF/PA6 were obtained and their influence mechanisms were analyzed. The effects of the heat press processing method on the internal voids and mechanical properties of 3D‐printed CF/PA6 were investigated, and the optimal post‐processing parameters applicable to CF/PA6 were obtained. The study resulted in optimal printing parameters and post‐processing parameters for 3D printing CF/PA6, which greatly enhanced its tensile and flexural strength and modulus.

Study on Performances of Graphite‐filled Polypropylene/polyamide 6 Composites Manufactured by Fused Deposition Modeling

Evolution of microstructure and thermo‐mechanical attributes of fiber reinforced polyamide during fused deposition modeling 3D printing: A comprehensive characterization study

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing

Performance evaluation on particle‐reinforced rigid/flexible composites via fused deposition modeling 3D printing

Fused deposition modeling 3D printing of polyamide-based composites and its applications

Performance enhancement of 3D‐printed carbon fiber‐reinforced nylon 6 composites

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK

Investigation on the mechanical properties of 3D printed hybrid continuous fiber-filled composite considering influence of interfaces

High-Performance Polyamide/Carbon Fiber Composites for Fused Filament Fabrication: Mechanical and Functional Performances

Fused deposition modeling of carbon‐reinforced polymer matrix composites: A comprehensive review

Research on the Application of MWCNTs/PLA Composite Material in the Manufacturing of Conductive Composite Products in 3D Printing

Crystallization and preliminary X-ray diffraction analysis of the di-haem cytochrome c peroxidase from Pseudomonas stutzeri.

Advanced Composite Materials Utilized in FDM/FFF 3D Printing Manufacturing Processes: The Case of Filled Filaments

PLA/Graphene/MWCNT Composites with Improved Electrical and Thermal Properties Suitable for FDM 3D Printing Applications

An investigation into mechanical properties of a 3D printed two-matrix continuous fiber composites with multi-cavity structure

A Comparative Analysis of Chemical, Plasma and In Situ Modification of Graphene Nanoplateletes for Improved Performance of Fused Filament Fabricated Thermoplastic Polyurethane Composites Parts

Study on performance characteristics of fused deposition modeling 3D ‐printed composites by blending and lamination

Thermal Deformation of PA66/Carbon Powder Composite Made with Fused Deposition Modeling

Effect of process parameters of fused deposition modeling on mechanical properties of poly-ether-ether-ketone and carbon fiber/poly-ether-ether-ketone

Investigation of Fused Deposition Modelling Process Parameters in 3D Printing for Composite Material (Poly Lactic Acid and Banana Fibre)