Abstract:This research aims to find an efficient and nondestructive way of detecting the locations of the pipe wall thinning (PWT) in a long-distance metal pipe at open-end condition. Time domain measurement of microwave signals is adopted in the method since microwaves can propagate a long distance with low attenuation in the pipe and reflection occurs at the PWT section. To carry out the measurement, a vector network analyzer and a self-designed coaxial-line sensor were used to generate microwave signals propagating in the pipe. By analyzing the time domain response of the signals and extracting the time of flight (TOF) that corresponds to the PWT location, the locations are quantitatively evaluated after the group velocity of the signals propagating in the pipe was calibrated. In order to approach a pipe with different PWT degrees and locations, three brass pipes with an inner diameter of 17.0 mm and lengths of 453 mm, 455 mm, and 2000 mm, respectively, were used in the experiment. In addition, five joints, which have the length of 17.0 ram and inner diameters from 17.10 to 18.20 mm were also used. The arithmetical mean error of the evaluation for PWT locations is found to be less than 1.7 mm, i.e. less than 0.068% of the length of the corresponding pipe. It indicates that a quite efficient and precise method to remotely and quantitatively evaluate PWT locations in a long-distance pipe has been established. [doi: 10.2320/matertrans.M2011236]

RFEC Based Oil Downhole Metal Pipe Thickness Measurement

Investigation of pipe thickness monitoring using the shear wave EMAT technology with high lift-off distance

A high-efficiency nondestructive method for remote detection and quantitative evaluation of pipe wall thinning using microwaves

Analysis and Experimental Study on the Measurement of Pipe Wall Thinning by Perturbation Method

On-line thickness monitoring technique based on eddy-current and virtual system

Pipeline thickness measurement for in-line inspection using wholly stepped electromagnetic acoustic transducers

Application of Microwaves for Nondestructive and High-Efficiency Detection of Wall Thinning Locations in a Long-Distance Metal Pipe

Optimizing the Frequency Range of Microwaves for High-Resolution Evaluation of Wall Thinning Locations in a Long-Distance Metal Pipe

1509 Microwave Measurement and Evaluation of Wall Thinning in Metal Pipes

Microwave Measurement and Quantitative Evaluation of Wall Thinning in Metal Pipes

332 Remote Measurement of Pipe Wall Thinning by Microwaves

Remote Measurement Of The Pipe Thickness Reduction By Microwaves

Study on the Relationship Between Thickness Measurement and Strength Defect of Buried Pipeline

Thickness and Permeability Estimation of Metallic Plates by Triple-Frequency Eddy-Current Testing With Probe Lift-Off

G0310501 A Method for Quantitative Evaluation of Pipe Wall Thinning Using Microwaves

Thickness Measurement of Metallic Film Based on a High-Frequency Feature of Triple-Coil Electromagnetic Eddy Current Sensor

Evaluation of Pipe Thickness by Magnetic Hammer Test with a Tunnel Magnetoresistive Sensor

Local Defect Detection of Ferromagnetic Metal Casing Based on Pulsed Eddy Current Testing

Metal Thickness Measurement System Based on a Double-Coil Eddy-Current Method with Characteristic Ratio Detection.

An effective method for differentiating inside and outside defects of oil and gas pipelines based on additional eddy current in low-frequency electromagnetic detection technique

Noncontact Thickness Measurement of Metal Films Using Eddy-Current Sensors Immune to Distance Variation