Abstract:A synthesis method of N th-order wideband bandpass filter (BPF) with cross-coupled or inline topology using inductive-and capacitive-coupling components is presented. The synthesized admittance matrix can fully represent the frequency-dependent characteristics of the J-inverters and resonators that are used to implement the wideband BPF. All negative inductive-coupling elements in the trisection, quadruplet, or conjoined trisection blocks can be transformed into negative capacitive-coupling elements by using the proposed similarity transformation matrix and the corresponding transformation conditions. As a consequence, the resulted admittance matrix can be directly implemented using lumped elements. All values of the lumped elements can be calculated without any optimization. The transformation method of cascaded blocks filter with trisection, quadruplet, and two conjoined trisections is demonstrated through several numerical examples. The fundamental transformation of third-order and fourth-order cross coupled or inline topologies is proposed first. Cascaded block synthesis for higher order wideband BPF with multiple transmission zeros (TZs) is then carried out based on the proposed fundamental transformation. The proposed synthesis method can be applied to N th-order wideband BPF with multiple TZs. To validate the proposed method, a fifth-order cascaded triplets (CTs) filter with fractional bandwidth (FBW) of 66.7%, one TZ at the lower stopband, and two TZs at the upper band are synthesized, designed, and fabricated.

Direct Synthesis Method for Dual-Band Bandpass Filters with Wide Fractional Bandwidth Range and Center Frequency Ratio.

A 1.3–1.7-Ghz $Q$ -Enhanced Resonator-Based High-IF Bandpass Filter with 1.5%–67% Tunable Fractional Bandwidth in 65-Nm CMOS Process

Direct Synthesis of Multiband Bandpass Filters With Generalized Frequency Transformation Methods

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Compact Dual-Band Narrowband Bandpass Filter with Small Frequency Ratio

Iterative Synthesis of Dual-Band Filters with Separately Assignable Operating Bands Using Bandpass Polynomials and Prototypes

Compact Dual-Band Bandpass Filter with Ultra-Wide Upper-Stopband

Synthesis of Wideband Bandpass Filter With Cross-Coupled or Inline Topology for Direct Circuit Implementation Using Lumped Elements

Direct Synthesis Approach for Designing High Selectivity Microstrip Distributed Bandpass Filters Combined with Deep Learning

Advanced Synthesis of Wide-Tuning-Range Frequency-Adaptive Bandpass Filter with Constant Absolute Bandwidth

A Tunable Balanced Dual‐band BPF with Quasi‐independently Controlled Center Frequency and Bandwidth

Miniaturized dual-band bandpass filter with good frequency selectivity using SIR and DGS

The Rough Prototype and Fine Tuning (RP-FT) Method for Multiband Bandpass Filter Synthesis

Synthesis of Wideband Bandpass Filter With In-Band Complex Transmission Zeros for Frequency-and Attenuation-Reconfigurable In-Band Notch

Dual-band bandpass filter derived from the transformation of a single-band bandpass filter

A Hybrid Transmission-Line/SAW-Resonator Analog Signal-Interference Dual-Band Bandpass Filter

Compact Dual-Band Bandpass Filter with Improved Stopband Characteristics

A Quad‐band Bandpass Filter Using Split‐ring Based on T‐shaped Stub‐loaded Step‐impedance Resonators

A Wideband Filtering Switch: Its Synthesis and Design

High-Selectivity Balanced Bandpass Filter with Mixed Electric and Magnetic Coupling