Abstract:Voltage sags have become one of the most important power quality issues in recent years. According to survey results across the US, voltage sags and short duration power outages account for 92% of power quality problems encountered by industrial customers. Voltage sags often causes undervoltage faults in various sensitive loads and subsequently interrupt manufacturing processes. Such interruptions often inflict severe losses for industries. The existing sag compensation systems accomplish fast response within small fraction of a fundamental cycle by tracking the line voltages closely, and switch on the compensator whenever the voltage waveforms deviate from the normal values. However, utility voltages often contain surges and spikes with amplitudes up to 200% resulting from the switching of power factor correction capacitors and lightning strikes. Such transient disturbances may trigger the sag compensator into operation if the controller is very sensitive. The switching frequency of the compensation inverter is insufficient to compensate the narrow pulses of voltage spikes. Furthermore, the power semiconductors of the inverter may also be damaged by the surges. In this paper, a synchronous reference frame (SRF) based sag compensation scheme are presented. A sag detection mechanism is included in the controller for correct and prompt identification of voltage sags. Disturbances like voltage spikes are attenuated to avoid any false triggering of the compensator. The overall system responds to voltage sags and restore the voltage back to balanced 1.0 pu. for the critical loads within one-eighth to one-fourth of a cycle, which meet the requirement of ITI standard and SEMI-F47 standard. Simulation and laboratory test results will be presented to verify the functionality of the proposed controller.

Allocation Method of Voltage Sag Based on User’s Quantitative Demand

Study On Peak Cutting And Valley Filling Based On Flexible Load

System Voltage Sag Performance Estimation

Research on Voltage Sag Loss Assessment Based on a Two-Stage Taguchi Quality Perspective Method

A Comprehensive Weight-Based Severity Evaluation Method of Voltage Sag in Distribution Networks

An Optimal Reactive Power Compensation Allocation Method Considering the Economic Value Affected by Voltage Sag

Benchmarking of Voltage Sag Generators

Assessment of voltage sag/swell in the distribution network based on energy index and influence degree function

ANALYSIS OF VOLTAGE SAGS IN DISTRIBUTION SYSTEM

Discussion On Voltage Sag Source Locating Method In Distribution Network

Evaluation Method and Probabilistic Index of Voltage Sag Severity Considering Point-on-wave

Optimized Placement of Voltage Sag Monitors Considering Distributed Generation Dominated Grids and Customer Demands

Design and Implementation of a Series Voltage Sag Compensator under Practical Utility Conditions

Economic Loss Assessment of Voltage Sags

Industrial Feasibility of Medium-voltage High-power Comprehensive Treatment Device for Voltage Sags

Automatic Test Method of Typical Sensitive Equipment for Voltage Sag Withstand Characteristics Analysis

Influence of distributed generation on voltage sag and load-loss cost allocation

A Fast Voltage Sag Detection Method Based on Second Order Generalized Integrator and Delay Transform Method

A Voltage Sag Source Locating Method with Multiple Screening Criterions Considering Voltage Measurement Errors

A Novel Voltage Sag Detection Method Based on a Selective Harmonic Extraction Algorithm for Nonideal Grid Conditions

Dynamic Coordinated Control and Capacity Optimization Method for Voltage Sag Compensation with Energy Storage Connected in Series and in Parallel