Abstract:Two basic types of resonances exist in microcavities. One is whispering gallery mode (WGM) resonance which Occurs particularly in circular and elliptical-shaped micro-disks. The other type of resonance is mutiple-bouncing periodic orbit. Bow-tie bouncing modes found in a quadruple-shaped cavity and some types of scar modes in chaotic systems are typical examples. Emission directionality from a microcavity is an important property because achieving highly collimated emission (comparable to that of,I bulk laser system) from microcavity lasers is essential to obtain high brightness micro-light Sources for coupling with other optical systems. Asymmetric resonant cavities (ARCS) have been designed and fabricated to achieve laser emissions with directionality, however, the beam divergences of all those reported ARCS were found to be of ten degrees at least.In this work, we report an observation of directional laser emission with extremely narrow divergence (about 2 degrees) from a peanut-shaped microcavity. This narrow divergence is very promising for the microcavity to be used as micro-lasers with high brightness. We also demonstrated that the real resonance in a peanut-shaped microcavity is a very special hybrid resonance which combines a whispering gallery orbit and a two-bouncing orbit.The peanut-shaped microcavity was fabricated by coating dye doped organic/inorganic hybrid glass materials on a pair of fibers. A gain layer with 1.12 wt% laser dye (Rhodamine B, RhB) in the organic/inorganic hybrid matrix material (n = 1.52) was dip-coated on the stacked fiber to form a peanut-shaped boundary. The inset in Fig. 1 shows schematically a peanut-shaped microcavity. It is obvious that a peanut-shaped microcavity is a largely deformed cavity comparing with those in references, especially it has a concave Curvature, which is avoided in conventional microcavity design for resonances on WGMs. Fig. I plotted the integrated far-field laser emission intensity versus emission angle. Lasing from the cavity has four major strong emission peaks. The divergence of these strong peaks is 2 degrees. The very narrow divergence is striking when compared with the typical divergence in the other microcavities of over 10 degrees. Combining information oil mode spacing, far-field emission pattern and the lasing threshold. the most possible resonant orbit was found to be ail asymmetric hybrid resonance which consists half whispering gallery orbit and half two-bouncing orbit, as illustrated in Fig. 2. The divergent beam leaving left part of cavity is collimated by the curvature of the right cavity boundary that works like a ball lens. Therefore, an extreme narrow emission divergence is achieved. Comparing with other orbits Such as diamond-like orbits, the hybrid mode may not have the largest Q when a passive cavity is considered. as long as the two bouncing points are highly lossy. However, since a peanut-shaped cavity only has a very thin gain layer, for the hybrid mode, comparing to multiple-bouncing periodic loops. total gain is much larger because the WGM path overlaps with the gain area, therefore the hybrid mode becomes the most possible lasing mode.

Unusual Polarization Relation Between Single-Mode Lasing Emission and Excitation Laser from an Evanescent-Wave Pumped Micro-Cavity Laser

Unidirectional Lasing from A Spiral-Shaped Microcavity of Dye-Doped Polymers

Single-mode Lasing Via Loss Engineering in Fiber-Taper-coupled Polymer Bottle Microresonators

Multi-wavelength Solitons Delivered by an Evanescent-Field Device Based on Polarization-Sensitive MoTe2 Micro-Sheets

Mode Selection in InGaAs/InGaAsP Quantum Well Photonic Crystal Lasers Based on Coupled Double-Heterostructure Cavities.

Evanescent-wave Pumped Single-Mode Microcavity Laser from Fiber of 125??μm Diameter

Polarization-multiplexed, synchronous ultrashort pulse generation from a linear-cavity fiber laser with a polarization-rotation loop mirror

Gain-Guiding Anisotropic Polarized Amplified Spontaneous Emissions from C-Plane ZnO/ZnMgO Multiple Quantum Wells

Single-Mode Surface-Emitting Polariton Lasing with Switchable Polarization in a CsPbBr3 Microwire Folded Fabry–Pérot Cavity

Kekulé-modulated topological bulk cavity for intrinsic lateral beam shifting of high-purity linear-polarized light emission

Tunable multidimensional multiplexed Q-switched pulse outputs from a linear fiber laser with a bidirectional loop

Reflective and Transmissive Characteristics in an All-polarization-maintaining Linear-cavity Fiber Laser Mode-locked by Nonlinear Polarization Evolution

Single-Mode Surface-Emitting Polariton Lasing with Switchable Polarization in a CsPbBr 3 Microwire Folded Fabry–Pérot Cavity

Dual Orthogonally Polarized Lasing Assisted by Imaginary Fermi Arcs in Organic Microcavities

Polarization-multiplexed, single-cavity dual-comb fiber laser based on a birefringent crystal and a saturable absorber.

Selective transverse mode emission from all polarization-maintaining fiber lasers

Single-polarization, switchable dual-wavelength erbium-doped fiber laser with two polarization-maintaining fiber Bragg gratings

Dual orthogonally-polarized lasing assisted by imaginary Fermi arcs in organic microcavities

Whispering gallery mode structure in polymer-coated lasing microspheres

Machine-learning Iterative Optimization for All Polarization-Maintaining Linear Cavity Er:fiber Laser.

Laser Emission With Hybrid Resonant Mode From An Active Peanut-Shaped Microcavity