Abstract:In view of the potential demand for the materials with excellent dynamic mechanical behavior in protective construction, the dynamic tensile mechanical properities and deformation mechanism of twinning-induced plasticity (TWIP) steel at various high strain rates were investigated in this paper by combining test research and numerical simulation. In order to explore the impact of strain rates on mechanical behaviors within the tested range, a split Hopkinson tensile bar (SHTB) was utilized to measure the mechanical responses of TWIP steel ranging from 1000 s -1 to 6500 s -1 . The Johnson-Cook (J-C) dynamic constitutive model was established based on the mechanical test results, and the mechanical properties were studied by using ANSYS/LS-DYNA. EBSD and TEM were employed to investigate the microstructure evolution of TWIP steel under dynamic loading. The results demonstrate that both strength and plasticity increase with increasing strain rate, demonstrating positive strain rate sensitivity (PSRS) which is primarily due to the activation of multiple twin systems at higher strain rates. As the strain rate increases, the mean free path of dislocation slip reduces, causing a higher strain hardening rate. The critical shear stress required for twinning is almost unchanged with an increase in strain rate, while the shear stress required for dislocation increases consistently. As the strain rate exceeds 3000 s -1 , the critical shear stress required for dislocation becomes greater than that for twinning. With increasing strain rate, the proportion of secondary twins in TWIP steel rises and the deformation twins are bent when the strain rate is 6500 s -1 owing to the effect of dislocations and stacking faults. The production of nanoscale twins at higher strain rates is a beneficial phenomenon, as it enhances both strength and plasticity. The deformation twins become thinner with an increase in strain rate, leading to a rise in the stress needed for the motion of dislocations to pass the twins, which contributes to the improvement of strength in TWIP steel. The slip systems that deforms at a disadvange have new orientations because of defromation twins. The established J-C model is appropriate well for analyzing the mechanical properties of TWIP steel in the tested range of strain rates accoring to the fingdings of test and numerical simulation. Establishing the connection of microstructure and macroscopic behavior of TWIP steel could provide a guidance for the its further study and the application in the fields of impact resistance and anti-explosion.

Investigation of Work Hardening Behavior in Multilayered Steels Architected by Twinning Induced Plasticity Steel and Martensitic Steel During Uniaxial Tension

The Influence of Warm Rolling Reduction on Microstructure Evolution, Tensile Deformation Mechanism and Mechanical Properties of an Fe-30Mn-4Si-2Al TRIP/TWIP Steel

Revealing the Individual Hardening Effects of Twins, Dislocations, Grain Boundaries and Solid Solution in a Twinning-Induced Plasticity Steel

Effects of Twin-Dislocation and Twin-Twin Interactions on the Strain Hardening Behavior of TWIP Steels

Investigations of dislocation-type evolution and strain hardening during mechanical twinning in Fe-22Mn-0.6C twinning-induced plasticity steel

Transmission electron microscopy observation of a deformation twin in TWIP steel by an ex situ tensile test

The mechanism of twin thickening and the elastic strain state of TWIP steel nanotwins

Analysis of TWIP Effect

Investigation of dynamic tensile mechanical responses and deformation mechanism at high strain rates in a TWIP steel

Microstructure and mechanical properties of a novel twinning induced plasticity steel with two different grain morphologies

In-situ TEM investigation of deformation mechanisms of twinning-induced plasticity steel

Cross-slip of extended dislocations and secondary deformation twinning in a high-Mn TWIP steel

Microstructure evolution of ultra-high-strength twinning-induced plasticity (TWIP) steel under dynamic loading

INVESTIGATIONS ON TEMPERATURE DEPENDENCE OF MECHANICAL PROPERTIES AND THE DEFORMATION MECHANISM OF A TWIP STEEL

Twinning-Induced Plasticity Steel for the Automotive Industry: Design Stress for Gas Tungsten Arc Welded Parts

Atomic-scale Understanding of Twin Intersection Rotation and Ε-Martensite Transformation in a High Mn Twinning-Induced Plasticity Steel

Atomistic Simulation for Deforming Complex Alloys with Application Toward TWIP Steel and Associated Physical Insights

Machine-Learning-Assisted Composition Design for High-Yield-Strength TWIP Steel

Hot Deformation Behavior and Dynamic Recrystallization Mechanism of Fe-18.2Mn-0.52C Twinning-Induced Plasticity Steel

The relative contributions of TWIP and TRIP to strength in fine grained medium-Mn steels

Microstructure evolution and fracture behaviour of TWIP steel under dynamic loading