Abstract:In order to improve the thermal conductivity of W composites as plasma-facing materials, the interface bonding and interfacial thermal resistance of the composites are the key issues to be solved. Based on our previous study, although Si coating on diamond surface can improve the interface bonding and thermal conductivity of the composite, there still existed the interfacial reaction between W and diamond, which produced more low thermal conductivity compounds (WC/W 2 C) and added the interfacial thermal resistance of the composites. To further improve the interface bonding and increased the thermal conductivity of diamond/W composites, the Si-coated diamonds were used to prepare the Si-SiC dual layer on diamond via vacuum heat treatment and then to fabricate diamond/W composites (HT-coated diamond/W composite). The effects of temperature and holding time of the heat treatment on coating and its interface bonding with the composites were investigated by scanning electron microscopy, X-ray diffraction and transmission electron microscopy. The results showed that a stable and dense Si-SiC-diamond structure was formed after heat treatment at 1200 °C for 1 h, and the thickness of SiC transition layer was about 20 nm. Thermodynamic analysis demonstrated the reaction rate of SiC increased gradually first and then sharply from 1000 °C to 1400 °C. The integrity of the coating on the diamond surface was strongly impacted by residual compressive stress of the SiC layer, and its value increased with the SiC thickness. The Si-SiC dual layer evidently improved the interface bonding and thermal conductivity of diamond/W composite under the combined influence of reaction diffusion at SiC-W interface, inter-diffusion at W-Si interface, and the orientation relationship at diamond-SiC interface. Theoretical thermal analysis proved that HT-coated diamond/W composite possessing lower interface thermal resistance than that of Si-coated diamond/W composite and raw diamond/W composite achieved higher thermal conductivity of 205 W m −1 K −1 .

Effect of deposition temperature and time on microstructure of CVD SiC coating on diamond particles

CVD Synthesis of Nanometer SiC Coating on Diamond Particles

Microstructure and oxidation behavior of SiOC coatings on C/C composites co-deposited with HMDS and TEOS by using CVD process

The Effects of Deposition Temperature on the Depositon Rates and Structures of CVD SiC Coatings

Effect of Temperature on Microstructure and Composition of CVD SiC Coating

Effect of Temperature on the Chemical Vapor Deposition of Silicon Carbide Coatings

Low-temperature Β-Sic Interlayer for Diamond Film on Cemented Carbide

Preparing SiC/diamond coatings via chemical vapor deposition of SiC on diamond-coated graphite and their frictional properties

Effect of Microstructure on Impact Resistance of Chemical Vapor Deposited SiC Coating on Graphite Substrate

Deposition Mechanism and Microstructures of SiC Coatings Deposited at Low Temperature

Deposition Rate, Texture, and Mechanical Properties of Sic Coatings Produced by Chemical Vapor Deposition at Different Temperatures

Effects of Deposition Temperature on Microstructures and Ablative Properties of SiC Coatings Prepared by CVD from Methylsilane

Influence of Grain Size on Wear Behavior of SiC Coating for Carbon/carbon Composites at Elevated Temperatures

High Temperature Oxidation Behavior of SiC Coating Materials

Diamond Deposition on WC–Co Substrate with Amorphous SiC Interlayer

Growth of SiC As Binder to Adhere Diamond Particle and Tribological Properties of Diamond Particles Coated SiC

Synthesizing SiC layer on diamond by heat treatment and its effects on density and thermal conductivity of diamond/W composite

Atomic Simulation and Experimental: Oxidation Protective SiC Coating Produced by Chemical Vapor Deposition and Pack Cementation for Carbon/carbon Composites

Effects of Deposition Conditions on the Morphology and Composition of CVD SiC Coating

Preparation and Characterization of Chemical Vapor Deposited Dense SiC Surface Coatings

Reprint of “A Study of CVD Diamond Deposition on Cemented Carbide Ball-End Milling Tools with High Cobalt Content Using Amorphous Ceramic Interlayers”