Abstract:Titanium-extracted tailing slag (TETS) has high activity, but the content of chloride ions is high. To effectively bind the chloride ions, CaO was used to activate the TETS, and the solidified cementitious material of CaO-activated TETS was prepared. The effects of CaO content and curing age on the strength of solidified samples, chloride binding capacity, and chloride binding mechanism were studied. By means of XRD, FTIR, SEM, and EDS, the hydration reaction products, microstructure, morphology, and micro-components of the solidified sample were characterized. The results show that the chloride ions can be effectively bound by using CaO to activate TETS with higher mechanical strength. When the CaO content is 10 wt%, the strength of the 28-day-cured body can reach more than 20 MPa, the chloride ion binding amount is 38.93 mg/g, and the chloride binding rate is as high as 68%. The new product phases of the solidified sample are mainly Friedel's salt (FS) and calcite, in which the amount of FS production and the degree of crystal development are affected by the CaO content and curing age. The chloride binding ions in the solidified sample are mainly the chemical binding by FS. The FS diffraction peak strength increases with the increase of CaO content and curing age, but the calcite diffraction peak strength is less affected by them. FS mainly accumulates and grows in the pores of the solidified sample. It can optimize the pore structure of the solidified sample and improve the strength of the solidified sample while binding chloride ions. The results can provide useful information for the resource utilization of chlorine-containing TETS, the improvement of durability of Marine concrete, and the application of sea sand in concrete.

An Investigation on the Formation of Friedel's Salt in Tricalcium Silicate Combined with Metakaolin and Limestone Systems

Understanding the Role of Calcium Silicate Slag in Sodium Carbonate-Activated Green Materials: Influence on Kinetics, Strength, and Efflorescence

Synthesis, characterization and formation mechanism of friedel’s salt (FS: 3CaO·Al2O3·CaCl2·10H2O) by the reaction of calcium chloride with sodium aluminate

Influences of Friedel's Salt Produced by CaO-Activated Titanium-Extracted Tailing Slag on Chloride Binding

Investigation on chloride migration behavior of metakaolin-quartz-limestone blended cementitious materials with electrochemical impedance spectroscopy method

Early Strength-Promoting Mechanism of Inorganic Salts on Limestone-Calcined Clay Cement

Physically and Chemically Bound Chlorides in Hydrated Cement Pastes: a Comparison Study of the Effects of Silica Fume and Metakaolin

Study on the Binding Behavior of Chloride Ion and Ettringite in Nano-Metakaolin Cement by Seawater Mixing and Curing Temperatures

Experiments on Chloride Binding and Its Release by Sulfates in Cementitious Materials

The interaction between monosulfoaluminate and calcium chloride aqueous solution

Chloride Binding in Cement Paste with Calcined Mg-Al-CO3 LDH (CLDH) under Different Conditions

Chloride Ingress Profiles and Binding Capacity of Mortar in Cyclic Drying-Wetting Salt Fog Environments

Study on the chloride ion binding rate of sulfoaluminate cement mortars containing different mineral admixtures

Chloride-induced Corrosion Patterns of Reinforcements in Simulated Pore Solutions of Calcium Sulfoaluminate Cement Concrete: an Analytical Study

The chloride binding capacity and stability of gap-graded blended cement with calcined hydrotalcite and metakaolin

Effect of Supplementary Cementitious Materials on Stability of Bound Chloride Ion Under Carbonation Condition

Effects of Cyclic Seawater Exposure on the Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete

Meso-scale Mechanical Deterioration of Mortar Due to Sodium Chloride Attack

Chloride binding behaviors and early age hydration of tricalcium aluminate in chloride-containing solutions

The Stability of Bound Chlorides in Cement Paste with Sulfate Attack

Thermochemical behavior of several common salts blended with cement raw material