Abstract:The three-dimensional (3D) microstructure of neutron-irradiated uranium-10 wt.% molybdenum (U-10Mo) fuel with a burn-up of 9.8×10 21 fissions/cm 3 was characterized using a novel, multi-modal synchrotron micro-computed tomography approach combining propagation-based phase-contrast enhanced and absorption contrast techniques. The porosity development, porosity interconnectedness, swelling, composition, local thickness of the zirconium (Zr) diffusion barrier, and the influence of the fuel–cladding interaction on the local composition and pore morphology, were uniquely determined in 3D. Two cuboids were produced using a focused ion beam-scanning electron microscope at the Zr diffusion barrier–fuel interface and in the bulk fuel. The bulk fuel sample swelled by 53.3[+9.7/-3.1]%, while the fuel near the Zr–fuel interface swelled by 63.3[+14.7/-7.2]%. The average local thickness of the Zr diffusion barrier decreased by 53%, compared to the expected pre-irradiated thickness. Four pore morphology regions were identified initiating parallel to the fuel–Zr interaction region: (1) an interaction layer of suppressed porosity, (2) a layer of elongated and interconnected porosity, (3) a transition zone of low porosity, and (4) a layer of unoriented porosity representative of the bulk fuel behavior. The increase in porosity near the diffusion barrier corresponded to a higher U concentration compared to that in the bulk fuel. The interconnected porosity in the fuel near the diffusion barrier was extensive and oriented parallel to the diffusion barrier, while the bulk fuel had more compact and isolated pore networks. The interaction layer, despite having suppressed porosity, was nearly 100 wt.% U. Porosity suppression at the diffusion barrier corresponds to the expected reduction in radiation-driven diffusion of Xe at the interface despite the anticipated increase in fission product nucleation originating from a higher U concentration. The novel 3D insights of the porosity, swelling, and compositional variations characterized herein can improve the fidelity of fuel performance codes for proliferation-resistant fuels for research and test reactors.

Determining the swelling of mixed nitride uranium-plutonium fuel based on the post-reactor studies of experimental BN-600 and BOR-60 fuel rods

Particle emission from irradiated VVER-1200 fuel with Am burnable absorber

Investigation of swelling behaviors of U-10Zr metallic fuel in the low temperature regime via a cavitational void swelling model

Thermo-mechanical Behavior Simulation Coupled with the Hydrostatic-Pressure-dependent Grain-Scale Fission Gas Swelling Calculation for a Monolithic UMo Fuel Plate under Heterogeneous Neutron Irradiation

Modeling the Irradiation Swelling of UO2 at the Fuel Pellet Rim

Synchrotron Micro-Computed Tomography Analysis of Neutron-Irradiated U-Mo Fuel

Modelling of effective irradiation swelling for inert matrix fuels

Mechanical behaviors of the dispersion nuclear fuel plates induced by fuel particle swelling and thermal effect II: Effects of variations of the fuel particle diameters

Advanced Characterization-Informed Framework and Quantitative Insight to Irradiated Annular U-10Zr Metallic Fuels

Numerical Study of Thermal Destruction of Nitride Fuel Rods Using the Severe Accident Module of the Integral Euclid/V2 Code

Effects of Irradiation Growth on the Thermo-Mechanical Behaviors Evolution in Inert Matrix Fuel Elements

Mechanical Behaviors of the Dispersion Nuclear Fuel Plates Induced by Fuel Particle Swelling and Thermal Effect I: Effects of Variations of the Fuel Particle Volume Fractions

Investigation on the Irradiation-thermal–mechanical Coupling Behaviors of the Solid Microencapsulated Fuel Rod

Post irradiation examination of a uranium-zirconium hydride TRIGA fuel element

Metallographic Examination and Hydrogen Measurements of High-Burnup Spent Nuclear Fuel Cladding

Three-dimensional FE analysis of the thermal-mechanical behaviors in the nuclear fuel rods

Effects of Porous Fuel Structure on the Irradiation-Induced Thermo-Mechanical Coupling Behavior in Monolithic Fuel Plates

Computational Core Baffle Swelling Assessment of WWER Reactors: Modern Experience and Comparative Analysis

Post irradiation examinations of FeCrAl cladding in PWR conditions

Simulation of uranium mononitride spent fuel: A thermodynamic approach

Calculation and experimental analysis of BN-800 neutron-physical characteristics during the transition to mixed oxide fuel loading