Abstract:The three-dimensional (3D) microstructure of neutron-irradiated uranium-10 wt.% molybdenum (U-10Mo) fuel with a burn-up of 9.8×10 21 fissions/cm 3 was characterized using a novel, multi-modal synchrotron micro-computed tomography approach combining propagation-based phase-contrast enhanced and absorption contrast techniques. The porosity development, porosity interconnectedness, swelling, composition, local thickness of the zirconium (Zr) diffusion barrier, and the influence of the fuel–cladding interaction on the local composition and pore morphology, were uniquely determined in 3D. Two cuboids were produced using a focused ion beam-scanning electron microscope at the Zr diffusion barrier–fuel interface and in the bulk fuel. The bulk fuel sample swelled by 53.3[+9.7/-3.1]%, while the fuel near the Zr–fuel interface swelled by 63.3[+14.7/-7.2]%. The average local thickness of the Zr diffusion barrier decreased by 53%, compared to the expected pre-irradiated thickness. Four pore morphology regions were identified initiating parallel to the fuel–Zr interaction region: (1) an interaction layer of suppressed porosity, (2) a layer of elongated and interconnected porosity, (3) a transition zone of low porosity, and (4) a layer of unoriented porosity representative of the bulk fuel behavior. The increase in porosity near the diffusion barrier corresponded to a higher U concentration compared to that in the bulk fuel. The interconnected porosity in the fuel near the diffusion barrier was extensive and oriented parallel to the diffusion barrier, while the bulk fuel had more compact and isolated pore networks. The interaction layer, despite having suppressed porosity, was nearly 100 wt.% U. Porosity suppression at the diffusion barrier corresponds to the expected reduction in radiation-driven diffusion of Xe at the interface despite the anticipated increase in fission product nucleation originating from a higher U concentration. The novel 3D insights of the porosity, swelling, and compositional variations characterized herein can improve the fidelity of fuel performance codes for proliferation-resistant fuels for research and test reactors.

Post irradiation examination of a uranium-zirconium hydride TRIGA fuel element

Neutron Irradiation Response Of Explosion-Welded Cucrzr/316ln Joints For Iter Application

Advanced Characterization-Informed Framework and Quantitative Insight to Irradiated Annular U-10Zr Metallic Fuels

Assay of Zirconium and Americium in the Irradiated U-Zr Metal Alloy Fuel Slug

Free Uranium Fraction of Fuel Element of High Temperature Gas-Cooled Reactor

Synchrotron Micro-Computed Tomography Analysis of Neutron-Irradiated U-Mo Fuel

Investigation of swelling behaviors of U-10Zr metallic fuel in the low temperature regime via a cavitational void swelling model

Proton irradiation-induced cracking and microstructural defects in UN and (U,Zr)N composite fuels

Thermo-mechanical Behavior Simulation Coupled with the Hydrostatic-Pressure-dependent Grain-Scale Fission Gas Swelling Calculation for a Monolithic UMo Fuel Plate under Heterogeneous Neutron Irradiation

Neutron-Physical and Radiation Characteristics of Different Low Enrichment Fuels (Thorium and Uranium) in a Proposed JRTR Research Reactor

Particle emission from irradiated VVER-1200 fuel with Am burnable absorber

Contributions to the mechanistic understanding of the microstructural evolution in irradiated U-Mo dispersion fuel

Physics Evaluation of Alternative Uranium-Based Oxy-Carbide Annular Fuel Concepts for Potential Use in Compact High-Temperature Gas-Cooled Reactors

Post irradiation examinations of FeCrAl cladding in PWR conditions

The Effect of Temperature and Burnup on U-10Zr Metallic Fuel Chemical Interaction with HT-9: a SEM-EDS Study

Understanding fission gas bubble distribution, lanthanide transportation, and thermal conductivity degradation in neutron-irradiated α-U using machine learning

Zirconium analysis in microscopic spent nuclear fuel samples by resonance ionization mass spectrometry

Modeling of Zirconium Atom Redistribution and Phase Transformation Coupling Behaviors in U-10Zr-Based Helical Cruciform Fuel Rods under Irradiation

The irradiation behavior of atomized U-Mo alloy fuels at high temperature

Optimizing Hydride Stability in U-ZrHx Nuclear Fuel: The "Goldilocks Radius"

Effect of Heat Treatment on the Microstructure of Medium Burn-up U-Mo Monolithic Fuel Foils