Abstract:Exposure to ultraviolet (UV) radiation may cause the significant degradation of many materials. UV radiation causes photooxidative degradation which results in breaking of the polymer chains, produces free radical and reduces the molecular weight, causing deterioration of mechanical properties and leading to useless materials, after an unpredictable time. Polystyrene (PS), one of the most important material in the modern plastic industry, has been used all over the world, due to its excellent physical properties and low-cost. When polystyrene is subjected to UV irradiation in the presence of air, it undergoes a rapid yellowing and a gradual embrittlement. The mechanism of PS photolysis in the solid state (film) depends on the mobility of free radicals in the polymer matrix and their bimolecular recombination. Free hydrogen radicals diffuse very easily through the polymer matrix and combine in pairs or abstract hydrogen atoms from polymer molecule. Phenyl radical has limited mobility. They may abstract hydrogen from the near surrounding or combine with a polymer radical or with hydrogen radicals. Almost all synthetic polymers require stabilization against adverse environmental effects. It is necessary to find a means to reduce or prevent damage induced by environmental components such as heat, light or oxygen. The photostabilization of polymers may be achieved in many ways. The following stabilizing systems have been developed, which depend on the action of stabilizer: (1) light screeners, (2) UV absorbers, (3) excited-state quenchers, (4) peroxide decomposers, and (5) free radical scavengers; of these, it is generally believed that excited-state quenchers, peroxide decomposers, and free radical scavengers are the most effective. Research into degradation and ageing of polymers is extremely intensive and new materials are being synthesized with a pre-programmed lifetime. New stabilizers are becoming commercially available although their modes of action are sometimes not thoroughly elucidated. They target the many possible ways of polymer degradation: thermolysis, thermooxidation, photolysis, photooxidation, radiolysis etc. With the goal to increase lifetime of a particular polymeric material, two aspects of degradation are of particular importance: Storage conditions, and Addition of appropriate stabilizers. A profound knowledge of degradation mechanisms is needed to achieve the goal.

Single-Particle Analysis of the Photodegradation of Submicron Polystyrene Particles Using Infrared Photothermal Heterodyne Imaging

A carbon-14 radiotracer-based study on the phototransformation of polystyrene nanoplastics in water versus in air

Solid-phase photodegradation of polystyrene by nano TiO2 under ultraviolet radiation

3D imaging photocatalytically degraded micro- and nanoplastics

Using Infrared Photothermal Heterodyne Imaging to Characterize Micro- and Nanoplastics in Complex Environmental Matrices

Photochemical Oxidation of Polyethylene Terephthalate Microplastics Adsorbed on Sand and Silica Surfaces

Synergistic Photocatalysis by α-MoO3 Nanostructures and SWCNT Nanocomposites for Efficient Cross-Linking and Oxidative Degradation of Polystyrene Nanoplastics

Photodegradation of self-immolating polymers as a potential solution to particulate contamination

Insights into Plastic Degradation Processes in Marine Environment by X-ray Photoelectron Spectroscopy Study

Physicochemical alterations on UV aged polymers leading to microplastics formation: A multi-tiered study of polyester, polycarbonate and polyamide

Photodegradation and photostabilization of polymers, especially polystyrene: review

Quantifying the Dynamics of Polystyrene Microplastics UV-Aging Process

A multi-analytical approach to evaluate the removal efficiency of polystyrene nanoparticles in water treatment processes

UV/ozone Induced Physicochemical Transformations of Polystyrene Nanoparticles and Their Aggregation Tendency and Kinetics with Natural Organic Matter in Aqueous Systems.

Photochemical transformation of decachlorobiphenyl (PCB-209) on the surface of microplastics in aqueous solution

Solid-phase photocatalytic degradation of polystyrene plastic with TiO2 as photocatalyst

Photocatalytic degradation of polystyrene plastic under fluorescent light

Solid-phase Photocatalytic Degradation of Polyethylene Plastic under UV and Solar Light Irradiation

Synthesis and preliminary evaluation of Ag-TiO2/CNT hybrid nanocomposite for the degradation of polystyrene microplastics under solar irradiation

Degradation of nanoplastics in the environment: Reactivity and impact on atmospheric and surface waters

Modeling polystyrene nanoplastics degradation in water via photo-Fenton treatment: A shrinking-particle approach