Abstract:A controlled-strain repeated direction tension (RDT) test is useful for characterizing asphalt mixtures and assessing fatigue cracking accompanied by plastic deformation. The strain curve in a loading cycle of the controlled-strain RDT test is a standard haversine wave with only a tensile portion, whereas the stress curve has a tensile portion and a compressive portion (quasi-compression) because of the viscoelastoplastic nature of the asphalt mixture. Usually the material properties in the tensile stress portion (the tensile properties) are used, while those in the compressive stress portion (the quasi-compressive properties) are neglected. This leads to nonnegligible errors in estimating the dissipated strain energy (DSE) and characterizing the damage (such as cracking and permanent deformation) generated in the material. The objective of this paper is to obtain complete material properties and accurate amounts of dissipation and storage of energy of this test method as the foundation of damage characterization. This paper provides methods to simulate the stress and strain for the tensile and compressive stress portions separately so as to determine the tensile and quasi-compressive properties, respectively. The difference between the tensile and quasi-compressive properties is investigated using statistical analysis. It is found that the tensile properties of an asphalt mixture are different from the quasi-compressive properties due to the crack opening and closure within each loading cycle. The DSE calculated using both the tensile and quasi-compressive properties is larger compared to the traditional method using only the tensile properties, indicating an underestimation of the damage by the traditional method. In addition, the recoverable strain energy (RSE) is investigated to examine the ability of an asphalt mixture to store and recover energy. A new perspective in terms of the integration method is provided to determine the actual amount of the RSE in a loading cycle. DOI: 10.1061/(ASCE)MT.1943-5533.0000586. (C) 2013 American Society of Civil Engineers.

Asphalt dynamic shear parameter test device and test method thereof

Evaluation of Test Methods for Fracture Resistance of High Modulus Asphalt Binders from Rheological and Mechanical Perspectives

Rheological Behavior of High Modulus Asphalt Binder and Its Indication for Fracture Performances

Characterization of Asphalt Mixtures Using Controlled-Strain Repeated Direct Tension Test

Pseudo Energy-Based Crack Initiation Criterion for Asphalt-Filler Composite System under a Fatigue Shear Load

Dynamic analysis of asphalt pavement with reflective cracking on the soft clay ground

Study On The Anti-Cracking Performance Of Fibrous High-Viscoelastic Asphalt Sand

Mechanistic Characterization of Fatigue Damage Process and Failure Predictions of Asphalt Binders

Prediction of Dynamic Shear Modulus of Fine Aggregate Matrix Using Discrete Element Method and Modified Hirsch Model

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Micromechanical Discrete Element Modeling of Asphalt Mixture Shear Fatigue Performance

Test method for testing fatigue performance of asphalt binder

Viscoelastic Analysis of Asphalt Pavement with Reflective Cracks and Subjected to Dynamic Loading

Numerically Supported Experimental Determination of the Behavior of the Interlayer Bond in Asphalt Pavement

Real-time monitoring of asphalt pavement structure fatigue response based on tri-axis accelerometer

Fatigue performance of hot mix asphalt tested in controlled stress mode using dynamic shear rheometer

Rheological and Interaction Analysis of Asphalt Binder, Mastic and Mortar

Examining the Rheological and Adhesion Performance of Asphalt: Insights into the Influence of SARA Components

Asphalt Binder Testing at Low Temperature: Three-Point Bending Beam Test in Dynamic Shear Rheometer

Dynamic Stiffness of Bituminous Mixtures for the Wearing Course of the Road Pavement-A Proposed Method of Measurement

Performance characterization of the field aged asphalt pavement materials at mortar scale: Testing method optimization and rheology analysis