Abstract:Friction modifiers (FMs) are surface-active additives added to base fluids to reduce friction between rubbing surfaces. Their effectiveness depends on their interactions with rubbing surfaces and may be mitigated by the choice of the base fluid. In this work, the performance of an imidazolium ionic liquid (ImIL) additive in polyethylene-glycol (PEG) and 1,4-butanediol for lubricating steel/steel and diamond-like-carbon/diamond-like carbon (DLC—DLC) contacts were investigated. ImIL-containing PEG reduces friction more effectively in steel—steel than DLC—DLC contacts. In contrast, adding ImIL in 1,4-butanediol results in an increase in friction in steel—steel contacts. Results from the Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and focused ion beam-transmission electron microscopy (FIB-TEM) reveal that a surface film is formed on steel during rubbing in ImIL-containing PEG. This film consists of two layers. The top layer is composed of amorphous carbon and are easily removed during rubbing. The bottom layer, which contains iron oxide and nitride compound, adheres strongly on the steel surface. This film maintains its effectiveness in a steel—steel contact even after ImIL additives are depleted. Such film is not observed in 1,4-butanediol where the adsorption of ImIL is hindered, as suggested by the quartz crystal microbalance (QCM) measurements. No benefit is observed when the base fluid on its own is sufficiently lubricious, as in the case of DLC surfaces. This work provides fundamental insights on how compatibilities among base fluid, FM, and rubbing surface affect the performance of IL as surface active additives. It reveals the structure of an ionic liquid (IL) surface film, which is effective and durable. The knowledge is useful for guiding future IL additive development.

Long-Term Lubrication at 500 °C Using Continuously Replenishable Solid Lubricating Film Polymerized in Situ by Gasified Monomers PA and PPD

Re‐attainable Lubrication Films at 500°C Converted Through the Positional Polymerisation of DCDPS on the Preset Na2S Coating

In-situ synthesizing carbon-based film by tribo-induced catalytic degradation of PAO for reducing friction and wear.

Effects Of Polymer Composited Lubricant Coating On Tribological Properties Of Low-Carbon Steel Surface

Surface Engineering Design of Al2O3/Mo Self-Lubricating Structural Ceramics - Part II: Continuous Lubrication Effects of a Three-Dimensional Lubricating Layer at Temperatures from 25 to 800 °C

Preparation and tribological properties of multi-layer graphene/silicon dioxide composites-based solid lubricant coatings at elevated temperatures

Molecular Behaviors in Thin Film Lubrication—part Three: Superlubricity Attained by Polar and Nonpolar Molecules

Polyethylene Glycol Monolaurate Lubrication Triggers Liquid Superlubricity on Diamond-like Carbon Film

Ultralow Friction Polymer Composites Enabled by the Solid–liquid Core Microcapsules at High Temperatures

X‐ray Absorption Near‐edge Structure Analysis of Tribofilms Generated by Highly Efficient, Friction‐reducing Additive in Water–polyglycol–glycol Lubricant

State-of-the-Art of Extreme Pressure Lubrication Realized with the High Thermal Diffusivity of Liquid Metal

In-situ Formed Carbon Based Composite Tribo-Film with Ultra-High Load Bearing Capacity

Friction and Wear Behavior of PTFE Coatings Modified with Poly (methyl Methacrylate)

Synthesis of Oil-Soluble Polymer-Grafted Carbon Dots with Outstanding Colloidal Stability and Tribological Properties in Polyalphaolefin

Structural and environmental dependence of superlubricious properties in hydrogenated Graphite-Like carbon Films: Implications in solid state lubrication

Tribo-Induced Catalytically Active Oxide Surfaces Enabling the Formation of the Durable and High-Performance Carbon-Based Tribofilms

Towards Superlow Friction and Wear with Polysiloxane/ti3c2tx Nanocomposite Film and Polyalphaolefin Oil

In Situ Synthesis of Polyimide-Based Solid Lubricating Films on the Surface of Aluminium Alloy with Improved Tribological Performance

Surface Engineering Design of Alumina/Molybdenum Fibrous Monolithic Ceramic to Achieve Continuous Lubrication from Room Temperature to 800 °C

Lubrication mechanism of a strong tribofilm by imidazolium ionic liquid

Tribochemical Behaviors of Onion-like Carbon Films As High-Performance Solid Lubricants with Variable Interfacial Nanostructures