Abstract:The solvent-free amorphous Mg(BH4)(2) composite was in-situ synthesized by ball milling LiBH4 and MgCl2. It is found that the onset dehydrogenation temperature of the as synthesized composite is 126.9 degrees C, which is roughly 156 degrees C lower than that of pristine Mg(BH4)(2). The activation energy of the amorphous Mg(BH4)(2) and pristine Mg(BH4)(2) for the first dehydrogenation step was calculated as 120.01 kJ/mol and 487.99 kJ/mol, respectively. Hence the kinetics improvement is certified by the lower Ea value of the dehydrogenation process. When adding NbF5 into the composite, the catalyzed composite exhibits better hydrogen storage properties compared to pristine and amorphous Mg(BH4)(2). The catalyzed composite starts to release hydrogen at proximately 120 degrees C with a total capacity of 10.04 wt %. The reversibility of the catalyzed composite is also improved. The capacity of the catalyzed composite at the second cycle is 5.5 wt%. For the third and fourth cycles the catalyzed composite can still liberate 4 wt% H-2. Besides, the onset hydrogen desorption temperature during four cycles are extremely lower than those of pristine and amorphous Mg(BH4)(2). The peaks of the intermediate MgB12H12 is detected by FTIR as the regenerated hydrogenation product in the catalyzed composite. It can be speculated from the detailed analysis that there are mainly three reasons for the improved properties. Firstly, the additive NbF5 is favorable to enhance the hydrogen storage properties by modifying the dehydrogenation path and producing MgF2 and NbB2 as new products. Secondly, the in-situ formation of amorphous Mg(BH4)(2) is likely to improve the dehydrogenation properties of the samples due to its different reactivity comparing to crystal ones. Finally, LiCl can serve as buffer in the composite and thus improve the dehydrogenation properties. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Improvement on hydrogen generation properties of Zr(BH<sub>4</sub>)<sub>4</sub>?8NH<sub>3</sub>

Mechanical Alloying Synthesis and Characterization of Zinc Borohydride

Hydrogen generation properties and the hydrolysis mechanism of Zr(BH4)(4)center dot 8NH(3)

Hydrogen generation properties and the hydrolysis mechanism of Zr(BH<sub>4</sub>)<sub>4</sub>·8NH<sub>3</sub>

Hydrogen generation properties and the hydrolysis mechanism of Zr(BH4)4·8NH3

Synthesis and Hydrogen Storage Property Tuning of Zr(BH4)4·8NH3 Via Physical Vapour Deposition and Composite Formation

Improvement on the Kinetic and Thermodynamic Characteristics of Zr1-xNbxCo (x = 0–0.2) Alloys for Hydrogen Isotope Storage and Delivery

Synthesis and hydrolysis of NaZn(BH4)3 and its ammoniates

Hydrogen Storage Performance of 2lih + MgB 2 Doped with Hydrothermal-Synthesized ZrO 2 Nanorods

Study on the modification of Zr-Mn-V based alloys for hydrogen isotopes storage and delivery

Synergistic Effect of LiBH4and LiAlH4Additives on Improved Hydrogen Storage Properties of Unexpected High Capacity Magnesium Hydride

Ammonia Borane Modified Zirconium Borohydride Octaammoniate With Enhanced Dehydrogenation Properties

Enhancing Disproportionation Resistance of Zr2Co-based Alloys by Regulating the Binding Energy of H Atom

Metal‐Borohydride‐Modified Zr(BH4)4⋅8 NH3: Low‐Temperature Dehydrogenation Yielding Highly Pure Hydrogen

Improving MgH2 formation kinetics and its effect on NaBH4 synthesis

Exploration of hydrogen generation from an Mg-LiBH4 system improved by NiCl2 addition

Improved Hydrogen Release from Ammonia-Borane with ZIF-8.

Dehydriding Properties of Ti Or/and Zr-doped Sodium Aluminum Hydride Prepared by Ball-Milling

Structure and Decomposition of Zinc Borohydride Ammonia Adduct: Towards a Pure Hydrogen Release

In-situ Synthesis of Amorphous Mg(BH4)2 and Chloride Composite Modified by NbF5 for Superior Reversible Hydrogen Storage Properties

Reversible Hydrogen Storage Properties and Favorable Co-Doping Mechanism of the Metallic Ti and Zr Co-Doped Sodium Aluminum Hydride