Structure-dependent Iron-Based Metal–organic Frameworks for Selective CO2-to-CH4photocatalytic Reduction

Xiao-Yao Dao,Jin-Han Guo,Xiao-Yu Zhang,Shi-Qing Wang,Xiao-Mei Cheng,Wei-Yin Sun

DOI: https://doi.org/10.1039/d0ta10278d

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:MIL-100(Fe) exhibits superior activity and selectivity for CH4generation under visible-light irradiation compared with MIL-101(Fe).

What problem does this paper attempt to address?

Structure-dependent iron-based metal–organic frameworks for selective CO2-to-CH4 photocatalytic reduction

Xiao-Yao Dao,Jin-Han Guo,Xiao-Yu Zhang,Shi-Qing Wang,Xiao-Mei Cheng,Wei-Yin Sun

DOI: https://doi.org/10.1039/d0ta10278d

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:MIL-100(Fe) exhibits superior activity and selectivity for CH4 generation under visible-light irradiation compared with MIL-101(Fe).
Engineering valence-mismatched Ti4+ into Fe-based metal–organic-frameworks for enhanced photocatalytic CO2 reduction

Rui Li,Xiang Xue,Minqi Wu,Xuan Zuo,Huilin Hu,Guangshan Zhou,Wang Zhang,Jun Pan,Xiangliang Pan

DOI: https://doi.org/10.1039/d4cc02714k

IF: 4.9

2024-07-20

Chemical Communications

Abstract:A series of low-dose high-valence Ti 4+ doped MIL-53-NH 2 (Fe) photocatalysts were synthesized for visible-light-driven CO 2 reduction. The highest CO 2 -to-CO conversion rate of Ti 4+ doped MIL-53-NH 2 (Fe) was 7.24 mmol g −1 h −1 and the highest CO selectivity was 94% in acetonitrile solvent using [Ru(bpy) 3 ] 2+ and triethanolamine.

chemistry, multidisciplinary
Self-adaptive dual-metal-site pairs in metal-organic frameworks for selective CO2 photoreduction to CH4

Jian Li,Hongliang Huang,Wenjuan Xue,Kang Sun,Xiaohui Song,Chunrui Wu,Lei Nie,Yang Li,Chengyuan Liu,Yang Pan,Hai-Long Jiang,Donghai Mei,Chongli Zhong

DOI: https://doi.org/10.1038/s41929-021-00665-3

IF: 37.8

2021-08-01

Nature Catalysis

Abstract:Solar-light-driven reduction of CO2-to-CH4 is a complex process involving multiple elementary reactions and various by-products. Achieving high CH4 activity and selectivity therefore remain a significant challenge. Here we show a bioinspired photocatalyst with flexible dual-metal-site pairs (DMSPs), which exhibit dynamic self-adaptive behaviour to fit mutative C1 intermediates, achieving CO2-to-CH4 photoreduction. The Cu and Ni DMSPs in their respective single-site forms under flexible microenvironment are incorporated into a metal-organic framework (MOF) to afford MOF-808-CuNi. This dramatically boosts CH4 selectivity up to 99.4% (electron basis) and 97.5% (product basis), and results in a high production rate of 158.7 μmol g−1 h−1 with a sacrificial reagent. Density functional theory calculations reveal that the flexible self-adaptive DMSPs can stabilize various C1 intermediates in multistep elementary reactions, leading to highly selective CO2-to-CH4 process. This work demonstrates that efficient and selective heterogeneous catalytic processes can be achieved by stabilizing reaction intermediates via the self-adaptive DMSP mechanism.

chemistry, physical
Metalloporphyrin-Based Metal–Organic Frameworks for Photocatalytic Carbon Dioxide Reduction: The Influence of Metal Centers

Qian Li,Keke Wang,Heyu Wang,Mengmeng Zhou,Bolin Zhou,Yanzhe Li,Qiang Li,Qin Wang,Hai-Min Shen,Yuanbin She

DOI: https://doi.org/10.3390/pr11041042

IF: 3.5

2023-03-31

Processes

Abstract:Photocatalysis is one of the most promising technologies to achieve efficient carbon dioxide reduction reaction (CO2RR) under mild conditions. Herein, metalloporphyrin-based metal–organic frameworks (MOFs) with different metal centers, denoted as PCN-222, were utilized as visible-light photocatalysts for CO2 reduction. Due to the combination of the conjugated planar macrocyclic structures of metalloporphyrins and the stable porous structures of MOFs, all PCN-222 materials exhibited excellent light-harvesting and CO2-adsorbing abilities. Among the studied MOFs of varied metal centers (M = Pt, Fe, Cu, Zn, Mn), PCN-222(2H&Zn) exhibited the highest photocatalytic CO2RR performance, with an average CO yield of 3.92 μmol g−1 h−1 without any organic solvent or sacrificial agent. Furthermore, this was three and seven times higher than that of PCN-222(Zn) (1.36 μmol g−1 h−1) and PCN-222(2H) (0.557 μmol g−1 h−1). The superior photocatalytic activity of PCN-222(2H&Zn) was attributed to its effective photoexcited electron–hole separation and transportation compared with other PCN-222(2H&M) materials. The obtained results indicate that Zn ions in the porphyrin's center played an important role in the reaction of active sites for the adsorption–activation of CO2. In addition, PCN-222(2H&Zn) showed the highest CO2 selectivity (almost 100%) and stability. This work provides a clear guide for the design of efficient photocatalysts.

engineering, chemical
Designing Heteroatom‐Codoped Iron Metal–Organic Framework for Promotional Photoreduction of Carbon Dioxide to Ethylene

Fan Guo,Rui-Xia Li,Sizhuo Yang,Xiao-Yu Zhang,Hongjian Yu,Jeffrey J. Urban,Wei-Yin Sun

DOI: https://doi.org/10.1002/anie.202216232

2023-01-01

Angewandte Chemie International Edition

Abstract:AbstractRational engineering active sites and vantage defects of catalysts are promising but grand challenging task to enhance photoreduction CO2 to high value‐added C2 products. In this study, we designed an N,S‐codoped Fe‐based MIL‐88B catalyst with well‐defined bipyramidal hexagonal prism morphology via a facile and effective process, which was synthesized by addition of appropriate 1,2‐benzisothiazolin‐3‐one (BIT) and acetic acid to the reaction solution. Under simulated solar irradiation, the designed catalyst exhibits high C2H4 evolution yield of 17.7 μmol g−1⋅h, which has been rarely achieved in photocatalytic CO2 reduction process. The synergistic effect of Fe‐N coordinated sites and reasonable defects in the N,S‐codoped photocatalyst can accelerate the migration of photogenerated carriers, resulting in high electron density, and this in turn helps to facilitate the formation and dimerization of C−C coupling intermediates for C2H4 effectively.
Formation of a Mixed-Valence Cu(i)/Cu(ii) Metal-Organic Framework with the Full Light Spectrum and High Selectivity of CO2 Photoreduction into CH4

Yajun Gao,Lei Zhang,Yuming Gu,Wenwei Zhang,Yi Pan,Weihai Fang,Jing Ma,Ya-Qian Lan,Junfeng Bai

DOI: https://doi.org/10.1039/d0sc03754k

IF: 8.4

2020-01-01

Chemical Science

Abstract:A Cu(i)/Cu(ii) MOF with a full light spectrum was synthesized, exhibiting a photocatalytic CO2-to-CH4 selectivity of 72.8% in aqueous solution.
Dynamic Pyridinethiol Ligand Shuttling within Iron-Anchored Covalent Organic Frameworks Boosts CO2 Photoreduction

Yong-Kang Zhang,Lan Zhao,Alexander Olegovich Terent'ev,Liang-Nian He

DOI: https://doi.org/10.1039/d4ta07403c

IF: 11.9

2024-12-03

Journal of Materials Chemistry A

Abstract:Covalent organic framework (COF), as a porous crystalline material, provides a versatile platform for photocatalytic CO2 reduction reaction (PCO2RR). However, the lack of surface redox active sites and rapid photogenerated charge recombination are the major barriers limiting further enhancement of PCO2RR activity. Herein, we designed a novel photocatalytic system constructed from a dynamic D··M-A structure COF. The earth abundant metal iron sites were embedded into the triazinyl COF structure containing bipyridine units (Fe-bpy-COF), and the subsequent supplementation of pyridinethiol to the system allowed efficient CO2 photoreduction without additional photosensitizers. Remarkably, the Fe-bpy-COF system achieved an impressive formate yield of 4052 μmol g-1 h-1 and CO yield of 2123 μmol g-1 h-1, being over approximately 8.2-fold higher than that of the previously reported Re-COF under visible light irradiation. On the basis of 1H NMR titration experiments and steady-state tests of the absorption spectra, the superior photocatalytic performance is accordingly attributed to the dynamic coordination interaction between the pyridinethiol ligands and Fe-bpy-COF host, thus facilitating continuous double-electron transfer from the pyridinethiol ligands to the iron center under visible light and inhibiting photogenerated charge recombination in Fe-bpy-COF. Finally, the reaction pathways of CO2 conversion catalyzed by the reductive iron active species are elucidated by combining experimental results and density functional theory study. This provides unprecedented insights into the design of earth abundant metal-derived COF photocatalysts for efficient and selective CO2 reduction under visible light.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Iron(iii)-bipyridine Incorporated Metal-Organic Frameworks for Photocatalytic Reduction of CO2 with Improved Performance.

Yuan-Ping Wei,Sizhuo Yang,Peng Wang,Jin-Han Guo,Jier Huang,Wei-Yin Sun

DOI: https://doi.org/10.1039/d0dt03500a

IF: 4

2021-01-01

Dalton Transactions

Abstract:Metal-organic frameworks (MOFs) represent an emerging class of platforms to assemble single site photocatalysts for artificial photosynthesis. In this work, we report a new CO2 reduction photocatalyst (UiO-68-Fe-bpy) based on a robust Zr(iv)-MOF platform with incorporated Fe(bpy)Cl3 (bpy refers to the 4'-methyl-[2,2'-bipyridine] moiety) via amine-aldehyde condensation. We show that this hybrid catalyst can reduce CO2 to form CO under visible light illumination with excellent selectivity and enhanced activity with respect to its parent MOF and corresponding homogeneous counterpart. Using steady state and transient absorption (TA) spectroscopy, we show that the enhanced photocatalytic activity of UiO-68-Fe-bpy is attributed to the elongated excited state lifetime of Fe(bpy)Cl3 after being incorporated to the UiO-68-NH2 platform. This work demonstrates the great potential of MOFs as a next generation platform for solar fuel conversion.
Mimic Metalloenzymes with Atomically Dispersed Fe Sites into Covalent Organic Framework Membranes for Enhanced CO2 Photoreduction

Shuaiqi Gao,Xiao Zhao,Qian Zhang,Linlin Guo,Zhiyong Li,Huiyong Wang,Suojiang Zhang,Jianji Wang

DOI: https://doi.org/10.1039/d4sc05999a

IF: 8.4

2024-12-04

Chemical Science

Abstract:The massive CO2 emissions from continuous increases in fossil fuel consumption have caused disastrous environmental and ecological crises. Covalent organic frameworks (COFs) hold the potential to convert CO2 and water into value-added chemicals and O2 to mitigate this crisis. However, their activity and selectivity are very low under conditions close to natural photosynthesis. In this work, inspired by the photosynthesis process in natural leaves, we successfully anchored atomically dispersed Fe sites into interlayers of the photoactive triazine-based COF (Fe-COF) membrane to serve as a mimic metalloenzyme for the first time. It is found that under the conditions of gas-solid and no addition of any photosensitizer and sacrificial reagent, the highly crystalline Fe-COF membrane shows a record high CO2 photoreduction performance with the CO production of 3972 μmol g-1 in a 4 h reaction, ~100% selectivity of CO, and excellent cycling stability (at least 10 cycles). In such a remarkable photocatalytic CO2 conversion, the atomically dispersed Fe sites with high catalytic activity significantly reduce the formation energy barrier of key *CO2 and *COOH intermediates, the high-density triazine moieties supply more electrons to the iron catalytic center to promote CO2 reduction, and the homogeneous COF membrane greatly improves the electron/mass transport. Thus, this work opens a new window for the design of highly efficient photocatalysts and provides new insights into their structure-activity relationship in CO2 photocatalytic reduction.

chemistry, multidisciplinary
Engineering Single Cu Sites into Covalent Organic Framework for Selective Photocatalytic CO2 Reduction

Yize Zhang,Lili Cao,Guoyi Bai,Xingwang Lan

DOI: https://doi.org/10.1002/smll.202300035

IF: 13.3

Small

Abstract:Photocatalytic CO2 conversion into value-added chemicals is a promising route but remains challenging due to poor product selectivity. Covalent organic frameworks (COFs) as an emerging class of porous materials are considered as promising candidates for photocatalysis. Incorporating metallic sites into COF is a successful strategy to realize high photocatalytic activities. Herein, 2,2'-bipyridine-based COF bearing non-noble single Cu sites is fabricated by chelating coordination of dipyridyl units for photocatalytic CO2 reduction. The coordinated single Cu sites not only significantly enhance light harvesting and accelerate electron-hole separation but also provide adsorption and activation sites for CO2 molecules. As a proof of concept, the Cu-Bpy-COF as a representative catalyst exhibits superior photocatalytic activity for reducing CO2 to CO and CH4 without photosensitizer, and impressively, the product selectivity of CO and CH4 can be readily modulated only by changing reaction media. Experimental and theoretical results reveal the crucial role of single Cu sites in promoting photoinduced charge separation and solvent effect in regulating product selectivity, which provides an important sight onto the design of COF photocatalysts for selective CO2 photoreduction.
Efficient Visible-Light Photoreduction of CO 2 to CH 4 over an Fe-Based Metal–Organic Framework (PCN-250-Fe 3 ) in a Solid–Gas Mode

Jun-Rong An,Ye Wang,Wen-Wen Dong,Xue-Jing Gao,Ou-Yang Yang,Yun-Ling Liu,Jun Zhao,Dong-Sheng Li

DOI: https://doi.org/10.1021/acsaem.1c03868

IF: 6.4

2022-02-01

ACS Applied Energy Materials

Abstract:Solar-driven highly efficient CO2 photoreduction by water oxidation to produce high-value-added chemical feedstocks of fuels remains extremely challenging. Over the past few decades, two types of reaction modes (solid–liquid or solid–gas) have been developed by researchers to achieve substrate-based photocatlytic CO2 reduction. In the absence of organic solvents, photosensitizers, and organic sacrificial agents, the solid–gas mode may be more suitable for photocatalytic CO2 reduction. A facile hydrothermal method was used to fabricate a low-cost and photosensitive azobenzene tetracarboxylic acid-based metal–organic framework (MOF), PCN-250-Fe3, which offers the advantages of visible-light and CO2 adsorption and facilitates an electron-coupled proton transition. Notably, PCN-250-Fe3 exhibited a maximum photocatalytic activity of 16.32 μmol g–1 with ca. 77.57% selectivity in 4 h without the use of photosensitizers or organic sacrificial agents under visible-light irradiation. This photocatalytic performance is superior to that of most nonporphyrin-based MOF photocatalysts under solid–gas reaction conditions. This study provides unique insight into enhancing the efficiency of the photoreduction of CO2 to CH4 by pure water.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Size Engineering of Metal–Organic Framework MIL-101(Cr)–Ag Hybrids for Photocatalytic CO2 Reduction

Fan Guo,Sizhuo Yang,Yi Liu,Peng Wang,Jier Huang,Wei-Yin Sun

DOI: https://doi.org/10.1021/acscatal.9b02126

IF: 12.9

2019-01-01

ACS Catalysis

Abstract:Particle size-tuned photocatalytic activity has been recognized for noble metals such as platinum; however, it is not established for metal-organic frameworks (MOFs). In this work, nanoscaled MOF MIL-101(Cr)-Ag nanoparticle hybrids with varied sizes ranging from 80 to 800 nm have been successfully achieved, and their size effect on photocatalytic CO2 reduction under visible light has been examined. We show that when the size of MIL-101(Cr)-Ag is reduced to 80 nm, the hybrid catalyst shows the highest CO2 photocatalytic reduction activity with remarkable production rates of 808.2 mu mol/g.h for CO and 427.5 mu mol/g.h for CH4, representing one of the most efficient hybrid catalysts. The high catalytic activity of the small-sized hybrid catalyst can be ascribed to the high density of unit cells on corners and edges of the catalyst, which are favorable for electron transfer in the photocatalytic CO2 reduction, supported by a set of complimentary photochemical and electrochemical methods.
Filling metal–organic framework mesopores with TiO2 for CO2 photoreduction

Zhuo Jiang,Xiaohui Xu,Yanhang Ma,Hae Sung Cho,Deng Ding,Chao Wang,Jie Wu,Peter Oleynikov,Mei Jia,Jun Cheng,Yi Zhou,Osamu Terasaki,Tianyou Peng,Ling Zan,Hexiang Deng

DOI: https://doi.org/10.1038/s41586-020-2738-2

IF: 64.8

2020-09-09

Nature

Abstract:Metal–organic frameworks (MOFs)1–3 are known for their specific interactions with gas molecules4,5; combined with their rich and ordered porosity, this makes them promising candidates for the photocatalytic conversion of gas molecules to useful products6. Attempts to use MOFs or MOF-based composites for CO2 photoreduction6–13, however, usually result in far lower CO2 conversion efficiency compared to state-of-the-art solid-state or molecular catalysts14–18, even when facilitated by sacrificial reagents. Here, we create 'molecular compartments' inside a MOF by growing TiO2 inside different pores of MIL-101 and its derivatives (Fig. 1). This compartmentalization allows for synergy between the light-absorbing/electron-generating TiO2 units and the catalytic metal clusters in the MOFs, and therefore facilitates photocatalytic CO2 reduction, concurrent with production of O2. An apparent quantum efficiency for CO2 photoreduction of 11.3% at 350 nm, is observed in a composite, 42%-TiO2-in-Cr-MIL-101-NO2. TiO2 units in one type of compartment in this construct are estimated to be 44 times more active than those in the other type, underlining the role of precise positioning of TiO2 in this system.

multidisciplinary sciences
Ionic Liquid Modified Fe-Porphyrinic Metal-Organic Frameworks as Efficient and Selective Photocatalysts for CO2 Reduction

Xue Zhao,Qiang Xu,Jingwei Han,Wenwen Zhang,Heng Rao,Dong-Ying Du,Ping She,Jun-Sheng Qin

DOI: https://doi.org/10.1021/acsami.4c04219

2024-05-22

Abstract:Porphyrin-based metal-organic frameworks (MOFs) are ideal platforms for heterogeneous photocatalysts toward CO2 reduction. To further explore photocatalytic MOF systems, it is also necessary to consider their ability to fine-tune the microenvironments of the active sites, which affects their overall catalytic operation. Herein, a kind of ionic liquid (IL, here is 3-butyric acid-1-methyl imidazolium bromide, BAMeImBr) was anchored to iron-porphyrinic Zr-MOFs with different amounts to obtain ILx@MOF-526 (MOF-526 = Zr6O4(OH)4(FeTCBPP)3, FeTCBPP = iron 5,10,15,20-tetra[4-(4'-carboxyphenyl)phenyl]-porphyrin, x = 100, 200, and 400). ILx@MOF-526 series was designed to investigate the effects of the microenvironmental and electronic structural modification on the efficiency and selectivity of the photochemical reduction of CO2 after introducing IL fragments. Compared to parent MOF-526, the production and selectivity of CO were greatly improved in the absence of any photosensitizer under visible light by the ILx@MOF-526 series. Among them, the CO yield of IL200@MOF-526 was up to 14.0 mmol g-1 within 72 h with a remarkable CO selectivity of 97%, which is superior to that of MOF-526 without BAMeIm+ modification and other amounts of BAMeIm+ loaded. Furthermore, density functional theory calculations were performed to study the mechanism of the CO2 reduction.
Enhanced the Photocatalytic CO2 Reduction Using Trimetallic Organic Framework as the Catalyst Under Visible Light

Chunxia Li,Huimin Yu,Shaohong Guo,Jingchun Jia,Ying Chang,Meilin Jia,Jiang Wang

DOI: https://doi.org/10.1039/d3nj05781j

IF: 3.3

2024-01-24

New Journal of Chemistry

Abstract:The photocatalytic reduction of carbon dioxide into high value-added chemical feedstock is significant for mitigation of energy crisis and green house. Metal-organic frameworks (MOFs) possess a broad application prospect in photocatalytic CO2 conversion by adjusting the metal types in metal cluster nodes. Herein, trimetallic Fe0.02Ni0.10-Cox-PCN-250 (x=0.05, 0.10, 0.15, 0.20 mol) were investigated for the CO2 photocatalytic performance by adjusting the content of Co. Notably, the photocatalytic yields of Fe0.02Ni0.10-Cox-PCN-250 (x=0.05, 0.10, 0.15, 0.20 mol) are higher than that of bimetal Fe0.02Ni0.10-PCN-250 and Fe0.02Co0.10-PCN-250 irradiated by visible light. Trimetallic Fe0.02Ni0.10-Co0.15-PCN-250 has the optimum yield of CO, up to 299 μmol.g-1.h-1. The enhanced yield of CO might be ascribed to the high CO2 adsorption capacity and photogenerated electrons transfer after addition of the suitable amount of the third ion Co. The study provides new insights by designing trimetallic catalysts to improve the efficiency of photocatalytic CO2 reduction.

chemistry, multidisciplinary
Ligand-controlled bimetallic Co/Fe MOF xerogels for CO 2 photocatalytic reduction

Kun Yang,Lu Chen,Xiaoyu Duan,Guanqing Song,Jing Sun,Aiying Chen,Xiaofeng Xie

DOI: https://doi.org/10.1016/j.ceramint.2023.01.204

IF: 5.532

2023-04-05

Ceramics International

Abstract:As a promising material with porous structure and large surface area, metal organic xerogel (MOX) has got extensive attention in the field of CO 2 photocatalytic reduction. The skeleton structure and pore morphology of organic xerogel framework materials contribute to the diffusion and transfer of CO 2 molecules. In this work, we prepared a serial of bimetallic Co/Fe-MOX by one-step solvent method, which can provide sufficient adsorption sites for CO 2 molecules. Meanwhile, the presence of cobalt and iron in Co/Fe-MOX enhances greatly not only the absorption and utilization of light energy in a synergistic manner, but also the separation and transfer of carriers. During the photocatalytic reduction process, the metal center of Co acts as major active site for photocatalysis. Therefore, the rapid conversion of CO 2 to CO is promoted. The Co/Fe-MOX with a molar ratio of 1:3 exhibits a high CO yield (67 μmol g −1 h −1 ), about 8.4 times that of Fe-MOX with a single Fe center (8 μmol g −1 h −1 ), implying the metal center Co acts as the main active site. This work provides ideas for designing metal organic xerogel materials with polymetallic centers for efficient photoreduction of CO 2 .

materials science, ceramics
Biphasic Titania Derivatives of Titanium Metal‐Organic Framework Nanoplates for High‐Efficiency Photoreduction of Diluted CO2 to Methane

Ya-Li Zheng,Jia-Tong Ren,Liang Zhou,Kun Yuan,Xiao-Chen Sun,Hai-Jing Yin,Ya-Wen Zhang

DOI: https://doi.org/10.1002/cctc.202002005

IF: 4.5

2021-01-01

ChemCatChem

Abstract:Exploring earth-abundant materials for low concentration CO2 photoreduction is the key in the energy related field. Here, we demonstrated biphasic titania (anatase and rutile) derived from Ti-based metal-organic framework (MOF) nanoplates exhibited excellent performance in CO2 photoreduction without any co-catalysts and sacrificial agents under ambient condition, the maximum CH4 production rate was up to 65.39 mu mol g(-1) h(-1) with near 100 % electron selectivity as well as great stability. The activity of the optimal derivative was maintained well even in 1 % CO2 (CH4: 45.59 mu mol g(-1) h(-1)) and much better than that of commercial P25. The upgraded performance originated from the synergism between local anatase/rutile interface and numerous defective sites (Ti3+ and O-v), by promoting the separation and migration of photogenerated carriers, CO2 adsorption and activation, and H2O dissociation. Besides, a possible fast hydrodeoxygenation mechanism for methane formation was proposed according to in situ DRIFTS characterization.
High-index facets exposed on metal–organic framework for boosting photocatalytic carbon dioxide reduction

Xiao-Mei Cheng,Xiao-Yu Zhang,Xiao-Yao Dao,Shi-Qing Wang,Jing Zhao,Wei-Yin Sun

DOI: https://doi.org/10.1016/j.cej.2021.134125

IF: 15.1

2022-03-01

Chemical Engineering Journal

Abstract:Facets exposed on metal–organic frameworks (MOFs) are considered to be responsible for the efficiency of photocatalytic CO2 conversion. Here, NH2-MIL-125(Ti) with exposed high-index {112} facets has been investigated in detail for photocatalytic CO2 reduction. Compared with low-index facets, the high-index {112} facets exhibit superior activity for CO2-to-CO and CO2-to-CH4 conversions, which are 33 and 31 times higher for CO and CH4 productions than the {001}/{111} facets. The superior photocatalytic activity is attributed to the large CO2 uptake, efficient photoexcitation, charge separation and migration behaviors of the NH2-MIL-125(Ti) with exposing high-index facets. This study provides an effective strategy to develop MOFs catalysts via facet-engineering for targeted performance.

engineering, chemical, environmental
Installing Earth-Abundant Metal Active Centers to Covalent Organic Frameworks for Efficient Heterogeneous Photocatalytic CO2 Reduction

Meng Lu,Qiang Li,Jiang Liu,Feng-Ming Zhang,Lei Zhang,Jin-Lan Wang,Zhen-Hui Kang,Ya-Qian Lan

DOI: https://doi.org/10.1016/j.apcatb.2019.05.033

2019-01-01

Abstract:Photocatalytic conversion of CO2 into energy carriers has been recognized as a highly promising strategy for achieving the virtuous carbon cycle in nature. The realization of this process depends on an efficient catalyst to reduce the reaction barrier. Herein, we report a series of transition metal ion modified crystalline covalent organic frameworks (COFs) for the heterogeneous photocatalytic reduction of CO2. By coordinating different kinds of open metal active species into COFs, the resultant DQTP (2,6-diaminoanthraquinone - 2,4,6-tri-formylphloroglucinol) COF-M (M = Co/Ni/Zn) exerts a strong influence on the activity and selectivity of products (CO or HCOOH). Significantly, DQTP COF-Co exhibits a high CO production rate of 1.02 x 10(3)mu mol h(-1) g(-1), while DQTP COF-Zn has a high selectivity (90% over CO) for formic acid generation (152.5 mu mol h(-1) g(-1)). This work highlights the great potential of using stable COFs as platforms to anchor earth-abundant metal active sites for heterogeneous CO2 reduction.
Photosensitizing Metal-Organic Polyhedra Combined with Co Catalytic Sites for CO2 Photoreduction

Jixin Li,Yaming Liu,Kaiyue Ma,Chunguang Li,Zhan Shi

DOI: https://doi.org/10.1039/d4qi01675k

IF: 7.779

2024-01-01

Inorganic Chemistry Frontiers

Abstract:Metal-organic frameworks (MOFs) are excellent photocatalysts due to their high designability and have been intensively investigated over the last decade. However, the catalytically active sites inside bulk MOFs may not...

Structure-dependent Iron-Based Metal–organic Frameworks for Selective CO2-to-CH4photocatalytic Reduction

Structure-dependent iron-based metal–organic frameworks for selective CO<sub>2</sub>-to-CH<sub>4</sub> photocatalytic reduction

Engineering valence-mismatched Ti4+ into Fe-based metal–organic-frameworks for enhanced photocatalytic CO2 reduction

Self-adaptive dual-metal-site pairs in metal-organic frameworks for selective CO2 photoreduction to CH4

Metalloporphyrin-Based Metal–Organic Frameworks for Photocatalytic Carbon Dioxide Reduction: The Influence of Metal Centers

Designing Heteroatom‐Codoped Iron Metal–Organic Framework for Promotional Photoreduction of Carbon Dioxide to Ethylene

Formation of a Mixed-Valence Cu(i)/Cu(ii) Metal-Organic Framework with the Full Light Spectrum and High Selectivity of CO2 Photoreduction into CH4

Dynamic Pyridinethiol Ligand Shuttling within Iron-Anchored Covalent Organic Frameworks Boosts CO2 Photoreduction

Iron(iii)-bipyridine Incorporated Metal-Organic Frameworks for Photocatalytic Reduction of CO2 with Improved Performance.

Mimic Metalloenzymes with Atomically Dispersed Fe Sites into Covalent Organic Framework Membranes for Enhanced CO2 Photoreduction

Engineering Single Cu Sites into Covalent Organic Framework for Selective Photocatalytic CO2 Reduction

Efficient Visible-Light Photoreduction of CO 2 to CH 4 over an Fe-Based Metal–Organic Framework (PCN-250-Fe 3 ) in a Solid–Gas Mode

Size Engineering of Metal–Organic Framework MIL-101(Cr)–Ag Hybrids for Photocatalytic CO2 Reduction

Filling metal–organic framework mesopores with TiO2 for CO2 photoreduction

Ionic Liquid Modified Fe-Porphyrinic Metal-Organic Frameworks as Efficient and Selective Photocatalysts for CO2 Reduction

Enhanced the Photocatalytic CO2 Reduction Using Trimetallic Organic Framework as the Catalyst Under Visible Light

Ligand-controlled bimetallic Co/Fe MOF xerogels for CO 2 photocatalytic reduction

Biphasic Titania Derivatives of Titanium Metal‐Organic Framework Nanoplates for High‐Efficiency Photoreduction of Diluted CO2 to Methane

High-index facets exposed on metal–organic framework for boosting photocatalytic carbon dioxide reduction

Installing Earth-Abundant Metal Active Centers to Covalent Organic Frameworks for Efficient Heterogeneous Photocatalytic CO2 Reduction

Photosensitizing Metal-Organic Polyhedra Combined with Co Catalytic Sites for CO2 Photoreduction