Abstract:Structure of nano amorphous matter has not been studied sufficiently yet due to the difficulty in both operation of nano matter and characterization of their structure. In this work, a detailed study of the structural orientation within amorphous polymeric nanofiber and its mechanical strength was conducted for a highly thermal resistant amorphous polymer: poly(phthalazinone ether ketone) (PPEK). Poly(butylene terephthalate) (PBT), a semi-crystalline polymer with partial difference in chain flexibility and geometry to PPEK, was chosen for a comparative discussion. For the method, highly aligned PPEK and PBT nanofiber bundles were prepared by electrospinning with a home-made book-like collecting device. X-ray experiments were conducted to research their structural orientation, and tension experiments were conducted to research their mechanical properties. It was found that the amorphous PPEK nanofibers showed relatively low orientation degree of polymer chain limited by its rigid and twisted segments within the polymer chain, while PBT nanofibers showed not only highly ordered crystal structure but also very large shish length, beneficial from the co-existence of rigid and flexible segments. The above structural information was well supported by their uniaxial tensile behaviors, where PBT nanofiber manifested much larger ultimate stress σ, failure strain ε, Young’s modulus E and toughness than those of PPEK nanofibers and commercial PBT plastic. However, the electrospun PBT nanofibers’ orientation degree, within the range of 0.45–0.7, is much lower than that of some reported melt-spun PBT fibers with the orientation degree above 0.9. Therefore, it can be concluded that the instinct characterization of polymer chain and processing technique have a much more significant influence than size effect on the structural orientation and mechanical strength of nanofibers rather than size effect.

Side-Chain Length Dependence of Young’s Modulus and Strength in Crystalline Poly(3-alkylthiophene) Nanofibers

Quantifying the Mechanical Anisotropy in Poly(3-hexylthiophene) Nanofibers

Mechanical Properties of Conjugated Polymers and Polymer‐Fullerene Composites as a Function of Molecular Structure

Study of the structural orientation and mechanical strength of the electrospun nanofibers from polymers with different chain rigidity and geometry

Impact of Side‐chain Length on the Phase Structures of P3ATs and P3AT:PCBM Films As Revealed by SSNMR and FTIR

Nanometer Scale Mechanical Study on Well Defined Nanostructured Chain Aggregation of Polyethylene

Effect of Chain Conformation on the Single-Molecule Melting Force in Polymer Single Crystals: Steered Molecular Dynamics Simulations Study.

Influence of Side‐chain Isomerization on the Isothermal Crystallization Kinetics of Poly(3‐alkylthiophenes)

Experimental Measurement of Polyethylene Chain Modulus by Scanning Force Microscopy

Single Molecule Force Spectroscopy Study on the Apparent Nanomechanical Properties of Polyethylene Single Crystals

Temperature-dependent Stress-Strain Behavior of Amorphous and Crystalline P3HT

Well-defined, High Molecular Weight Poly(3-Alkylthiophene)s in Thin-Film Transistors: Side Chain Invariance in Field-Effect Mobility

Chain rigidity controlled aggregation ability and solid-state microstructures for efficient stretchable conjugated polymer films

Chain Folding in Poly(3-Hexylthiophene) Crystals

Strength and Toughness of Semicrystalline Polymer Fibers: Influence of Molecular Chain Entanglement

What Determines Yield Stress in Semicrystalline Polymers Within Lamellar Stack Dimensions: Competition Between the Yield Behaviors of Crystalline and Glassy Amorphous Phases

Measurement of Cohesion and Adhesion of Semiconducting Polymers by Scratch Testing: Effect of Side-Chain Length and Degree of Polymerization

Influence of Side Chain Isomerism on the Rigidity of Poly(3-alkylthiophenes) in Solutions Revealed by Neutron Scattering

Effects of different alkyl substitution on the structures and properties of poly(3-alkylthiophenes)

Impact of the Alkyl Side-Chain Length on Solubility, Interchain Packing, and Charge-Transport Properties of Amorphous Π-Conjugated Polymers

Quantifying the Contribution of London Dispersion Interaction and Adjacent Chain Packing on the Polymer Stiffness: A DFT Study