Abstract:This paper reports a new stick-slip piezoelectric linear actuator with large load density, compact size, and high resolution. It is devised using a dual-arch bridge-type driving mechanism (DBDM) and an integrated elliptical preload mechanism(IEPM). The DBDM can generate a coupling motion on the driving point, which provides clamping and releasing actions during stick-slip motion. Also, the DBDM can magnify the clamping force with large amplification ratios, thus improving driving force and load-carrying capacity. The IEPM uses compact flexure hinges to adjust preload force, reducing structural dimension. Then, theoretical analysis and simulations are conducted, and a prototype is fabricated. A modified driving voltage with smooth turning points is designed to improve motion properties further. Experiments show that load density is 0.037 g/mm $^{\mathbf{3}}$ under the driving voltage of 100 V. The actuator has an overall size of 33.6 mm $\times$ 20 mm $\times$ 8 mm and a displacement resolution of 22 nm. Note to Practitioners —Most research on linear actuators focused on motion displacement improvement, and more research needs to be done on improving load-carrying capacity. Therefore, this paper designs a force amplification linear actuator with a compact structure using the DBDM. In the experimental stage, the sudden change of the driving signal affects the output performance, and a modified sawtooth voltage is used to improve the output speed and load-carrying capacity. The experimental results show that under the modified sawtooth wave voltage, the maximum speed of the slider is 1.4 mm/s, and the speed is increased by 17% compared with the traditional wave. When a 200 g load is applied to the slider, the linear actuator operates at a stable speed of 1.2 $\mu $ m/s, 33% faster than conventional sawtooth waves. As a result, the designed actuator has superior performance at higher loads.

A Piezoelectric Stick–slip Drive Nanopositioner with Large Velocity under High Load

A piezodriven three dimensional micropositioning stage for nano-manufacturing

A Novel Monopolar Cross-Scale Nanopositioning Stage Based on Dual Piezoelectric Stick-Slip Driving Principle

A flexure hinged piezoelectric stick–slip actuator with high velocity and linearity for long-stroke nano-positioning

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

A Novel Piezoelectrically Actuated 2-Dof Compliant Micro/Nano-Positioning Stage with Multi-Level Amplification

A 3-DOF piezoelectric driven nanopositioner: Design, control and experiment

A Novel 2-DOF Piezoelectric Stick-Slip Actuator With Parallel Guiding Decoupling

A Spatial 3-DOF Piezoelectric Robot and its Speed-Up Trajectory Based on Improved Stick-Slip Principle

Design, modeling, analysis and testing of a novel piezo-actuated XY compliant mechanism for large workspace nano-positioning

A New Stick-Slip Piezoelectric Actuator Using Dual-Arch Bridge-Type Compliant Mechanisms

Experiments and Study of a Low-Frequency, High-Speed Bi-Directional Piezoelectric Stick-Slip Actuator

Low-cost, open-source XYZ nanopositioner for high-precision analytical applications

Nano-and Micro-Actuations of Hard Disk’s Head Positioning System: Actuator Design and Evaluation of Performance

Modeling and Control of a Novel X-Y Parallel Piezoelectric-Actuator Driven Nanopositioner

Enhanced velocity and weight-bearing capability of piezoelectric viscous-slip actuators utilising a pentagonal flexible hinge configuration

Design and Experimental Validation of a Linear Piezoelectric Micromotor for Dual-Slider Positioning

A Large-Stroke Reluctance-Actuated Nanopositioner: Compliant Compensator for Enhanced Linearity and Precision Motion Control

A piezo-actuated nanopositioning stage based on spatial parasitic motion principle

A Novel Inertial Micro-Actuator and Its Application in Positioning Mechanism

Piezoceramic Stack Actuators for Micropositioning Stage