Abstract:Laminated C/SiC(carbon fiber reinforced silicon carbide composites) has the complicated nature of composite failure which include cracks for void defects at the meso and micro scales, complex cracks propagation of tunnel cracks, matrix cracks, delaminations and fiber cracks, orthotropic, and pseudoplastic behavior. It has technical challenge to solve all of them for complicated-mechanics problems by using multi-scale methodology. This paper focused tackling it by a model that lies between macro and meso scales, and proposed a new conceptual 3D FE-PDM(Finite Element - Progressive Damage Method). 3D FE-PDM was validated by the experiments of low-velocity impact of 2D C/SiC and 3D needled C/SiC. Damage initiation and evolution were controlled by strain in order to preventing stress chaos which could occur as cracks leading local stress relief. The multi-linear constitutive relations were adopted in orthotropic directions. The coupled effects of stresses between in-plane and out-of-plane were computed by adding damage coefficients into stiffness matrix. Cohesive Zone Method was used for delamination. The PDM approach was introduced for the 3D elements for intralaminar and cohesive elements for the interfaces. A parametric inversion methodology was put forward to determine the model parameters iteratively by comparing simulation results with the load-time curves, damage CT details of the experiments. Validation implies that, with small number of parameters, 3D FE-PDM is able to predict damage initiation of each phase knee, damage evolution, and load-displacement curve with good convergence for the low-velocity impact case. 2D woven and 3D needled non-woven C/SiC both have impact energy threshold and different damage evolution types.

A Coupled Micro–meso-Scale Study on the Damage Mechanism of 2D SiC/SiC Ceramic Matrix Composites

Progressive failure analysis of 2D woven composites at the meso-micro scale

Simulation of failure behavior of 2.5D SiC/SiC variable thickness dovetail joint structures based on mesoscale model

A meso-scale stochastic model for tensile behavior of 2D woven ceramic composites considering void defects and stacking mode

Piecewise damage model for SiC/SiC composites with multilevel experimental validation

An Efficient Multi-Scale Method for Failure Mechanism Analysis of SiCf/Ti Composites with Experimental Validation

Modeling the Monotonic and Cyclic Tensile Stress-Strain Behavior of 2D and 2.5D Woven C/SiC Ceramic-Matrix Composites

Micromechanical Modeling Tensile and Fatigue Behavior of Fiber-Reinforced Ceramic-Matrix Composites Considering Matrix Fragmentation and Closure

Development and validation of an anisotropic damage constitutive model for C/SiC composite

Multiscale nonlinear analysis of 3D orthogonal woven C/SiC composites based on the CT reconstruction

Multi-scale Progressive Damage and Failure Behavior Analysis of Three-Dimensional Winding SiC Fiber-Reinforced SiC Matrix Composite Tube

A Quantitative Representation of Damage and Failure Response of 3D Textile SiC/SiC Ceramics Matrix Composites Subjected to Flexural Loading

Damage failure mechanism of unidirectional fiber reinforced SiC f /SiC composites under uniaxial tension

Micro-CT Based Statistical Geometry Modeling and Numerical Verification of 2.5D Sicf/Sic Composite

Multi-scale modeling and tensile failure prediction of 3D needled C/C-SiC composites considering real microstructure

A Monte Carlo simulation of damage and failure process with crack saturation for unidirectional fiber reinforced ceramic composites

Progressive failure analysis of needle-punched C/SiC composites based on multiscale finite element model

Micromechanical Analysis of SiC/Ti6Al4V Composite Under Complex Stress State

Experimental and numerical studies on low-velocity impact of laminated C/SiC structures

Effects of Micro-Damage on the Nonlinear Constitutive Behavior of SiC / SiC Minicomposites

Tensile Damage Evolution and Mechanical Behaviour of SiCf/SiC Mini-Composites Through 4D In-Situ Micro-Ct and Data-Driven Modelling