Abstract:A reactive computational fluid dynamic-discrete element model (CFD-DEM) is coupled with a one-dimensional thermally thick model to simulate biomass pyrolysis in a three-dimensional rotary drum reactor. Furthermore, a diffusion-based voidage algorithm and a competitive pyrolysis scheme are also implemented. After validation, the integrated model is applied to explore the effects of the drum rotating speed and the filling level. The particle distribution and motion, heat transfer, and conversion behavior are selected as indicators. Results show that the particle inventory within the central transverse section is affected by both the mechanic effect of rotation and the axial conveying due to the product gas flux. The angle of repose for the central section first increases and then decreases with rotating speed, while increasing the filling level reduces the angle of repose and delays the bed sinking. Moreover, the particles at the bed surface are energetic and thus the area of high-value granular temperature is distributed along the bed surface. The particle accumulated displacement increases and the particle residence time at the wall reduces with the rotating speed and the filling level. In addition, the specific heat conduction rate can be promoted by decreasing the rotating speed and the filling level. A higher rotating speed or a lower filling level is favorable for particle mixing and thus makes particles heat up uniformly. Finally, a higher rotating speed or filling level exerts a negative impact on biomass conversion. These findings are helpful for better understanding biomass pyrolysis in a rotary drum reactor.

Double-helix pyrolysis reactor based on pyrolytic carbon internal circulation enhanced heat transfer

Biomass double-shaft screw pyrolysis device

Simulation of Biomass Pyrolysis in a Rotary Drum by Coupling CFD-DEM with a One-Dimensional Thermally Thick Model

Numerical Simulation of the Entrained Flow Hydropyrolysis of Coal in Magnetically Rotating Plasma Reactor

Mathematical Model for Mass and Heat Transfer in Multilevel Reactor for Pyrolysis of Used Tyres

Millisecond pyrolysis liquidation-gasification coupling multi-generation technology of biomass downward circulation bed

Design optimization and scale-up characteristics of a double-helical ribbon reactor for biomass catalytic pyrolysis

Feasibility Study of New Type Pyrolysis Liquefacient Reactor Based on Electromagnetic Induction

In-situ gas flow separation between biochar and the heat carrier in a circulating fluidized bed reactor for biomass pyrolysis

Comprehensive DEM-CFD model and thermal uniformity optimization for biomass catalytic pyrolysis reactor

Preparation Of Liquid Fuel Through Pyrolysis Of Biomass In A Conduit-Spouting Fluidized Reactor

Heat integration and dynamic characteristics analysis of coal pyrolysis to acetylene

DEM simulation of biomass pyrolysis in a novel interconnected screw reactor

Experimental study of heat transfer in a helical coiled tube biomass fired rotary device

Enhancement of heat transfer during rubber pyrolysis process

Preparation of Liquid Fuel Through Fast Pyrolysis of Biomass in a Spout-fluidized Reactor with a Draft Tube

STUDY ON DESIGN OF NEW TYPE DOUBLE BED STRAW PYROLYSIS GASIFICATION PROCESS

Interconnected pyrolysis and gasification of typical biomass in a novel dual fluidized bed

Side-by-side double-fluidized bed chemical-looping combustion/gasification device coupled with jacket type carbon separator

Analysis Of The Internal Working Process In Biomass Pyrolysis Fluidized-Bed Reactor

Experimental Research In Biomass Pyrolysis And Interparticle Heat Transfer