Abstract:Underwater wet welding processes with minimal energy consumption and high efficiency is the future goal for researchers in the field. Al/CuO exothermic mixtures in consumables for land welding process can improve welding process stability and decrease the electrical dependence of the welding process. To confirm the beneficial effects of Al/CuO thermite and gain a better understanding of metallurgical properties of the thermite welds in underwater environment, this study investigated underwater wet self-shielded flux-cored arc welding (FCAW-S) of high-strength low-alloy steel with highly exothermic Al/CuO mixture. The effects of Al/CuO thermite on arc stability, weld metallurgical behavior and melting characteristics of flux-cored wire were clarified. The ratio of chemical heat in the flux to the heat required to melt welding wire increased from 4.7% to 38.4% with the addition of Al/CuO, potentially accelerating the melting of flux-cored wires. The arc stability with thermite addition was superior to that without the addition of thermite. The presence of copper as a result of metallurgical reactions had a substantial impact on metallurgical behavior of underwater wet welds. The ferrite weld was a non-equilibrium Cu supersaturated solid solution, which increased the microhardness and tensile strength of wet welds. The measured cooling time proved that the incorporation of Al/CuO had the capacity to reduce cooling rate. The incorporation of 50wt.% thermite yielded a 7.8% increase in welding process efficiency compared to the base formulation. Current work provided an important direction for the development of a chemically self-heating flux-cored wire.

Active agent for low-alloy steel consumable electrode gas-shielded welding and consumable electrode gas-shielding welding method for rotating composition of active agent and welding stick

Method for optimizing aluminum/steel metal inert-gas (MIG) soldered joint through tungsten inert gas (TIG) voltaic arc cooperating with heating

Metal Transfer and Arc Behaviour of Novel Consumable and Non-Consumable Electrode Indirect Arc Droplet Welding

Welding torch for plasma arc and double MIG compounding

A study on consumable aided tungsten indirect arc welding

Multifunction Electrode for All Position and Vertical Down Welding

Welding tool and method for electromagnetic plastic friction stir welding

A novel approach to optimize weld formation and regulate interfacial microstructure in TC4/304SS dissimilar arc welding by active hybrid shielding gas

A novel rotating wire GMAW process to change fusion zone shape and microstructure of mild steel

A novel molten wire tungsten inert gas welding process

Strap-shaped welding wire filling-in type stirring friction treatment method

Underwater Wet Welding of High-Strength Low-Alloy Steel Using Self-Shielded Flux-Cored Wire with Highly Exothermic Al/CuO Mixture

A New Method to Control Welding Distortion with Impactive Rotating

An Innovative Methodology in Narrow Gap GTAW for Alternating Magnetic Field with Synchronous Swing of Filler Wire and Arc

Investigation of Process Stability and Weld Quality of Underwater Wet Flux-Cored Arc Welding of Low-Alloy High-Strength Steel with Oxy-Rutile Wire

Strip type welding wire feeding-along-with-welding friction stir welding method capable of removing welding line thinning

Automatic welding system for welding rod and automatic welding method

Microstructure and mechanical performance of depositing CuSi3 Cu alloy onto 30CrMnSi steel plate by the novel consumable and non-consumable electrodes indirect arc welding

Study and Application of Process Performance and Welding Wire of CO2 Welding and MAG Welding

Method for controlling brittle phases of titanium and stainless steel electronic beam welding joints adopting composite intermediate layers

TIG-MIG Indirect Arc Welding Process