Abstract:DOI: 10.1002/adma.201901220 Lithium–sulfur batteries with a high theoretical energy density of 2600 Wh kg−1 have received great attention and have been considered as one of the most promising energy storage devices.[1–3] During the past ten years, most efforts have been focused on solving the “shuttle effect” resulting from the dissolution of polysulfides, the volumetric expansion during lithiation and low conductivity of S/Li2S. However, the sulfur utilization, another important parameter for high-energy-density was overlooked due to the well-designed materials/structures with relatively low sulfur loadings (<2 mg cm−2) and excellent capability in Li+/e− transportation.[5] In the typical Li–S batteries using prevailing ether electrolytes, the active sulfur cathode undergoes multistep electrochemical reactions through solid–liquid–solid– solid phase transformation during the discharging process.[1,6] Based on the most Lithium–sulfur (Li–S) batteries with high sulfur loading are urgently required in order to take advantage of their high theoretical energy density. Ether-based Li–S batteries involve sophisticated multistep solid–liquid–solid–solid electrochemical reaction mechanisms. Recently, studies on Li–S batteries have widely focused on the initial solid (sulfur)–liquid (soluble polysulfide)–solid (Li2S2) conversion reactions, which contribute to the first 50% of the theoretical capacity of the Li–S batteries. Nonetheless, the sluggish kinetics of the solid– solid conversion from solid-state intermediate product Li2S2 to the final discharge product Li2S (corresponding to the last 50% of the theoretical capacity) leads to the premature end of discharge, resulting in low discharge capacity output and low sulfur utilization. To tackle the aforementioned issue, a catalyst of amorphous cobalt sulfide (CoS3) is proposed to decrease the dissociation energy of Li2S2 and propel the electrochemical transformation of Li2S2 to Li2S. The CoS3 catalyst plays a critical role in improving the sulfur utilization, especially in high-loading sulfur cathodes (3–10 mg cm−2). Accordingly, the Li2S/Li2S2 ratio in the discharge products increased to 5.60/1 from 1/1.63 with CoS3 catalyst, resulting in a sulfur utilization increase of 20% (335 mAh g−1) compared to the counterpart sulfur electrode without CoS3. Lithium–Sulfur Batteries

Expediting the Conversion of Li2S2 to Li2S Enables High-Performance Li-S Batteries

Expediting the Conversion of Li 2 S 2 to Li 2 S Enables High-Performance Li–S Batteries

Promoting the Transformation of Li2 S2 to Li2 S: Significantly Increasing Utilization of Active Materials for High-Sulfur-Loading Li-S Batteries

Promoting the Transformation of Li2S2 to Li2S: Significantly Increasing Utilization of Active Materials for High‐Sulfur‐Loading Li–S Batteries

Fast conversion and controlled deposition of lithium (poly)sulfides in lithium-sulfur batteries using high-loading cobalt single atoms

Expediting polysulfide catalytic conversion for lithium-sulfur batteries <i>via in situ</i> implanted ultrafine Fe<sub>3</sub>O<sub>4</sub> nanocrystals in carbon nanospheres

Promoting the Transformation of Li 2 S 2 to Li 2 S : Significantly Increasing Utilization of Active Materials for High-Sulfur-Loading Li – S Batteries

In Situ Transformation of LDH into NiCo2S4-NiS2 Nano- heterostructures on Hollow Carbon Boxes to Promote Sulfur Electrochemistry for High-Performance Lithium-Sulfur Batteries

In Situ Transformation of LDH into NiCo<sub>2</sub>S<sub>4</sub>-NiS<sub>2</sub> Nano-heterostructures on Hollow Carbon Boxes to Promote Sulfur Electrochemistry for High-Performance Lithium–Sulfur Batteries

In Situ Transformation of LDH into NiCo 2 S 4 -NiS 2 Nano-heterostructures on Hollow Carbon Boxes to Promote Sulfur Electrochemistry for High-Performance Lithium–Sulfur Batteries

Tuning Dual-Atom Mediator Toward High-Rate Bidirectional Polysulfide Conversion in Li-S Batteries

"Wane and wax" strategy: Enhanced evolution kinetics of liquid phase Li2S4 to Li2S via mutually embedded CNT sponge/Ni-porous carbon electrocatalysts

Rich Heterointerfaces Enabling Rapid Polysulfides Conversion and Regulated Li2S Deposition for High-Performance Lithium-Sulfur Batteries.

Catalytic Interfaces‐Enriched Hybrid Hollow Spheres Sulfur Host for Advanced Li–S Batteries

Rationally Design a Sulfur Cathode with Solid‐Phase Conversion Mechanism for High Cycle‐Stable Li–S Batteries

Enabling Rapid Polysulfide Conversion Kinetics by Using Functionalized Carbon Nanosheets As Metal-Free Electrocatalysts in Durable Lithium-Sulfur Batteries

Cathode Nanostructuring and Separator Modification for High-Performance Lithium-Sulfur Batteries

Confined Co9S8 nanocrystals into N/S-Co-doped Carbon Nanofibers as A Chainmail-like Electrocatalyst for High-performance Lithium-Sulfur Batteries with High Sulfur Loading

Regulating Li2S Deposition and Accelerating Conversion Kinetics Through Intracavity ZnS Toward Low-Temperature Lithium-Sulfur Batteries.

Atomically Dispersed and O, N-Coordinated Mn-Based Catalyst for Promoting the Conversion of Polysulfides in Li2S-Based Li-S Battery

A High Capacity All Solid‐State Li‐Sulfur Battery Enabled by Conversion‐Intercalation Hybrid Cathode Architecture