Study on the Self-Repairing Effect of Nanoclay in Powder Coatings for Corrosion Protection
Marshall Shuai Yang,Jinbao Huang,Hui Zhang,James Joseph Noël,Yolanda Susanne Hedberg,Jian Chen,Ubong Eduok,Ivan Barker,Jeffrey Daniel Henderson,Chengqian Xian,Haiping Zhang,Jesse Zhu
DOI: https://doi.org/10.3390/coatings13071220
IF: 3.236
2023-07-08
Coatings
Abstract:Powder coatings are a promising, solvent-free alternative to traditional liquid coatings due to the superior corrosion protection they provide. This study investigates the effects of incorporating montmorillonite-based nanoclay additives with different particle sizes into polyester/triglycidyl isocyanurate (polyester/TGIC) powder coatings. The objective is to enhance the corrosion-protective function of the coatings while addressing the limitations of commonly employed epoxy-based coating systems that exhibit inferior UV resistance. The anti-corrosive and surface qualities of the coatings were evaluated via neutral salt spray tests, electrochemical measurements, and surface analytical techniques. Results show that the nanoclay with a larger particle size of 18.38 μm (D50, V) exhibits a better barrier effect at a lower dosage of 4%, while a high dosage leads to severe defects in the coating film. Interestingly, the coating capacitance is found, via electrochemical impedance spectroscopy, to decrease during the immersion test, indicating a self-repairing capability of the nanoclay, arising from its swelling and expansion. Neutral salt spray tests suggest an optimal nanoclay dosage of 2%, with the smaller particle size (8.64 μm, D50, V) nanoclay providing protection for 1.5 times as many salt spray hours as the nanoclay with a larger particle size. Overall, incorporating montmorillonite-based nanoclay additives is suggested to be a cost-effective approach for significantly enhancing the anti-corrosive function of powder coatings, expanding their application to outdoor environments.
materials science, multidisciplinary,physics, applied, coatings & films