Abstract:<p>Engineered cementitious composites (ECC) are widely used owing to their high tensile capacity and strain-hardening behavior; however, the use of large quantities of cement require huge amount of resources and pollutes the environment. Fly ash-based geopolymer has been considered as a promising alternative for the development of high-ductility eco-friendly engineered materials. To improve the tensile capacity of engineered geopolymer composites (EGC), an ultra-high-ductility engineered geopolymer composite has been developed with the incorporation of functionalized multi-walled carbon nanotubes and polyvinyl alcohol fiber. This paper reports the mixture process and mechanical tests on EGC with different mixtures. Fourier transform infrared spectroscopy (FT-IR) and X-ray powder diffraction were used to investigate the characteristics of the reaction products in the geopolymer matrix. The microscopic morphology of the geopolymer matrix were characterized using field emission scanning electron microscopy. The excellent saturated multiple cracking properties and strain hardening of the ultra-high EGC (UHEGCs) were demonstrated by uniaxial tension testing. At the maximum limit, the residual crack width and crack spacing of UHEGCs were generally less than 70 μm and 2 mm, respectively. Tensile strain-hardening behavior with an ultimate tensile strain greater than 8% was experimentally demonstrated for the UHEGC. Meanwhile, the compressive strength of the UHEGC was greater than 45 MPa. The pseudo-strain hardening (PSH) indexes of UHEGC were used to determine the tensile capacity formation. Analysis demonstrated that the tensile capacity of UHEGC can be quantified using the classic PSH criterion, whereas ultra-high crack-bridging capacity was attributed to the ultra-high-ductility of UHEGC. The XRD studies demonstrated that for the reaction products of the geopolymer matrix, new crystalline phases are insignificant. The FT-IR analyses revealed that the amorphous aluminosilicate phases were mainly reaction products, i.e., N-A-S-H. Most importantly, the multi-scale (micro- and meso-scale) modification mechanisms of the material through the addition of two fibers were revealed.</p>

Performance enhancement of green high-ductility engineered cementitious composites by nano-silica incorporation

Mechanical Properties and Carbonation Durability of Engineered Cementitious Composites Reinforced by Polypropylene and Hydrophilic Polyvinyl Alcohol Fibers

Development of Sustainable Engineered Cementitious Composites by Incorporating Local Recycled Fine Aggregate

Simultaneous Enhancement of Ductility and Sustainability of High-Strength Strain-Hardening Cementitious Composites (SHCC) Using Recycled Fine Aggregates

Multiscale Investigation on the Performance of Engineered Cementitious Composites Incorporating PE Fiber and Limstone Calcined Clay Cement (LC3)

Properties of modified engineered geopolymer composites incorporating multi-walled carbon Nanotubes(MWCNTs) and granulated blast furnace Slag(GBFS)

Effect of nano-silica as cementitious materials-reducing admixtures on the workability, mechanical properties and durability of concrete

Enhancement of strength and ductility of cement-based composites by incorporating silica nanoparticle coated polyvinylalcohol fibers

Reinforcing efficiency of nanomaterials on mechanical and interfacial characteristics of green concrete incorporating fly ash cenosphere

Mechanical strength and microstructure of ultra‐high‐performance cementitious composite with glass powder substituted cement/silica fume

Modification of water absorption and pore structure of high-volume fly ash cement pastes by incorporating nanosilica

Preliminary Analysis of the Ductility and Crack-Control Ability of Engineered Cementitious Composite with Superfine Sand and Polypropylene Fiber (SSPP-ECC)

Combined effects of nano-silica and silica fume on the mechanical behavior of recycled aggregate concrete

Research on the toughening mechanism of modified nano-silica and silane molecular cages in the multi-scale microfracture of cement-epoxy composite

Experimental evaluation of mechanical properties and microstructure for recycled aggregate concrete collaboratively modified with nano-silica and mixed fibers

Mechanisms underlying the strength enhancement of UHPC modified with nano-SiO2 and nano-CaCO3

Development of Reactive MgO Cement-Silica Fume–Based Strain-Hardening Engineered Cementitious Composite

Influence of rice husk ash on the mechanical properties of ultra-high strength engineered cementitious composites (UHS-ECC)

Study on the reinforcing mechanisms of nano silica to cement-based materials with theoretical calculation and experimental evidence

Tunning matrix rheology and mechanical performance of ultra-high performance concrete using cellulose nanofibers

A Review of the Effect of Nano-Silica on the Mechanical and Durability Properties of Cementitious Composites