Abstract:With the trend of integrating structure and function of electron device, there is an urgent need to develop new thermal management materials that have good mechanical and excellent thermal properties . In this study, a sandwich-like composite film with good thermal conductivity was fabricated by utilizing vacuum hot pressing technology, to combine graphite films (upper and lower layers) and copper with embedded diamonds (middle layer). Diamonds were embedded in copper films that were then brought into contact with graphite films, which established interconnected structure between the graphite and copper films. To enhance the interfacial bonding of graphite and copper, a complete and dense WC coating was deposited on the surfaces of the graphite films and diamonds. This study delved into the effects of this interconnection structure on the thermophysical properties of the composite films. Diamonds served as connecting bridges between the upper and lower graphite films, and they were examined by micromorphological characterization. When the sintering pressure was 20 MPa, the composite film with 30 vol% diamond attained a flexural strength of 125 MPa. Notably, the in-plane thermal conductivity of the composite film reached a peak value of 780 W/(m·K), and the out-of-plane thermal conductivity achieved a maximum of 211 W/(m·K). This translated to approximately 20 % and 200 % increments in the in-plane and out-of-plane thermal conductivities, respectively, in comparison to samples lacking interconnected structures. The enhancement of the heat dissipating efficiency within the composite films was simulated and analyzed using the acoustic mismatch model (AMM). In summary, an efficient approach was developed to implement interconnected structures in composite films. The methodology developed in this study holds potential for enhancing thermal conductivity in various applications.

Fabrication of Graphite Films/copper Composites by Vacuum Hot Pressing for High-Efficiency Thermal Management Property

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

Fabrication of Cu/graphite film/Cu sandwich composites with ultrahigh thermal conductivity for thermal management applications

Fabrication, mechanical and thermal properties of tungsten-copper coated graphite flakes reinforced copper matrix composites

Fabrication of graphite/Cu composite foils with ultrahigh thermal conductivity by adding an intermediate nickel layer and vacuum hot pressing treatment

Synergistic enhancing effect of tungsten-copper coated graphite flakes and aluminum nitride nanoparticles on microstructure, mechanical and thermal properties of copper matrix composites

Effect of structural modification on the thermophysical properties of graphite films/diamond sandwich copper thermally conductive composite film

Thermal, Mechanical and Electrical Properties of Carbon Fiber Fabric and Graphene Reinforced Segmented Polyurethane Composites

Synergistic effects of tungsten coating on the microstructure, thermophysical and mechanical properties of graphite flakes reinforced copper matrix composites

Graphite films/carbon fiber fabric/polyurethane composites with ultrahigh in-plane thermal conductivity and enhanced mechanical properties

Ultrahigh thermal conductivity copper/graphite membrane composites prepared by tape casting with hot-pressing sintering

Achieving high thermal conductivity in CNTs@GF/Al laminates via a rapid and simple strategy

Preparation and properties of resin matrix composites reinforced by high thermal conductivity graphite films

Effects of Zr-Cu Alloy Powder on Microstructure and Properties of Cu Matrix Composite with Highly-Aligned Flake Graphite

Phase change composites with ultra-high through-plane thermal conductivity achieved by vertically-aligned graphite film and double-shelled microcapsules

Microstructure and properties of graphite nanoflakes/Cu matrix composites fabricated by pressureless sintering and subsequent thermo-mechanical treatment

Fabrication and Performance of Ultrathin and Adhesive Composite Film with High Out-of-Plane Thermal Conductivity Using 3D Printing and Microwire-cutting Assistance

Fabrication of high thermal conductivity C/C composites reinforced by graphite films with hexagonal pits

Anisotropic high thermal conductivity of flexible graphite sheets used for advanced thermal management materials

High-Performance Graphene Biocomposite Enabled by Fe3+ Coordination for Thermal Management.

Super-thick highly thermally conductive graphite/Sn laminated composites assembled by active Ti-containing Sn-Ag-Ti filler metals