Abstract:Metal oxide modified nickel catalysts are highly desirable for the conversion of biomass-derived compounds to biofuels and valuable chemicals because of their low-cost and unique synergistic effects in catalytic reaction. Herein, a series of metal oxide modified nickel catalysts were scrutinized in the hydrodeoxygenation of steatic acid to diesel-range alkanes without any carbon loss as a model reaction. The results showed that MoOx modified Ni/SiO2 catalyst was the most active and selective for the hydrodeoxygenation of stearic acid under mild reaction conditions (260 °C and 3.0 MPa H2 partial pressure). The catalyst with an Ni/Mo molar ratio of 1, and that was reduced at an optimized temperature (500 °C), exhibited the best performance; this catalyst achieved a high selectivity (>95%) to diesel-range alkanes at 100% stearic acid conversion. A high selectivity (>60%) to C18 alkane and a less than 30% selectivity to C17 alkane were observed at 260 °C and 3.0 MPa H2 partial pressure. By selecting an appropriate support, the selectivity to C18 alkane can reach 95% at 100% stearic acid conversion over Ni–Mo/H-ZSM-5 catalysts. In contrast to Ni/SiO2, Ni–Mo/SiO2 was more efficient for CO hydrogenation and less active for C–C bond cleavage, which afforded a higher selectivity to long-chain hydrocarbons without any carbon loss. Detailed characterization, control experiments, and kinetic studies indicate that the high activity and selectivity to the C18 alkane arises from a synergy between Ni and MoOx. The Ni sites at the interface between the Ni metal and MoOx species play a role in the generation of hydride (Hδ−) species from H2 dissociation, and MoOx plays a role in promotion of fatty acids adsorption through adsorbing carboxylic groups at the oxygen vacancy of MoOx. The deep understanding of such synergic catalysis will provide significant clues for the rational design of bimetallic catalysts towards the production of diesel-range alkanes without any carbon loss from the hydrodeoxygenation of fatty acids/esters.

Efficient catalytic conversion of jatropha oil to high grade biofuel on Ni-Mo<sub>2</sub>C/MCM-41 catalysts with tuned surface properties

Efficient catalytic conversion of jatropha oil to high grade biofuel on Ni-Mo2C/MCM-41 catalysts with tuned surface properties

Efficiency conversion of jatropha oil into high-quality biofuel over the innovative Ni-Mo2N based catalyst

The Conversion of Jatropha Oil into Jet-fuel on NiMo/Al-MCM-41 Catalyst: Intrinsic Synergic Effects between Ni and Mo

Transformation of Jatropha Oil into High-Quality Biofuel over Ni-W Bimetallic Catalysts

Chemical-switching strategy for the production of green biofuel on NiCo/MCM-41 catalysts by tuning atmosphere

Carbon-supported Molybdenum Carbide Catalysts for the Conversion of Vegetable Oils.

Ni/phosphomolybdic Acid Immobilized on Carbon Nanotubes for Catalytic Cracking of Jatropha Oil

The Deoxygenation of Jatropha Oil to High Quality Fuel Via the Synergistic Catalytic Effect of Ni, W2C and WC Species

Hydrotreatment of Jatropha oil over NiMoLa/Al2O3 catalyst

Hydrodeoxygenation of Ni-W bimetallic catalysts for the conversion of jatropha oil into high-quality fuel

Enhancement of fatty acids hydrodeoxygenation selectivity to diesel-range alkanes over the supported Ni-MoOx catalyst and elucidation of the active phase

Green Diesel Production Catalyzed by MoNi Catalysts Supported on Rice Husk Biochar

A cleaner process for hydrocracking of jatropha oil into green diesel

Conversion of Palmitic Acid to Jet Fuel Components over Mo/H-ZSM-22 Bi-Functional Catalysts with High Carbon Reservation

Hydroconversion of Jatropha Oil to Alternative Fuel over Hierarchical ZSM-5

Nanostructured Molybdenum Carbides Supported on Carbon Nanotubes As Efficient Catalysts for One-Step Hydrodeoxygenation and Isomerization of Vegetable Oils

One-pot Catalytic Hydrocracking of Diesel Distillate and Residual Oil Fractions Obtained from Bio-Oil to Gasoline-Range Hydrocarbon Fuel

A Clean Hydroprocessing of Jatropha Oil into Biofuels over a High Performance Ni-HPW/CNT Catalyst

Selective production of high-value fuel via catalytic upgrading of bio-oil over nitrogen-doped carbon-alumina hybrid supported cobalt catalysts

Efficient Hydrodeoxygenation of Methyl Palmitate over NiMo/ZrO2 Catalyst with Electron Transfer Between Ni and Mo