Abstract:Particle breakage plays a pivotal role in shaping the deformation behavior of granular soils when subjected to compression. To comprehensively assess the influence of particle breakage on the evolution of particle size distribution and the compression characteristics of calcareous sand, this study conducted 63 sets of confined compression tests on calcareous sand, specifically under high-pressure conditions. The results indicated that the compression behavior of calcareous sand can be classified into three distinct stages within the logarithmic coordinate system of void ratio ( e ) and vertical pressure ( σ v ): (1) σ v < 2.18 MPa, (2) 2.18 MPa < σ v < 4.35 MPa, and (3) σ v > 4.35 MPa, with the first and third stages representing linear relationships. Furthermore, the concept of yield stress ascertained within the e –log σ v coordinate system proves invaluable in assessing the effects of the initial void ratio ( e 0 ) and particle size ( d ) on particle breakage. Notably, when σ v exceeds 2.18 MPa, the relative breakage index experiences a substantial increase. The characteristic particle sizes ( d 10 , d 30 , d 50 , and d 60 ) of calcareous sands exhibit a consistent decrease with an increase in the relative breakage index ( B r ); however, this relationship is independent of e 0 but is closely related to the particle size ( d ) of calcareous sands. The one-dimensional compression characteristics of calcareous sand are effectively represented using a power function relationship, and a formula for calculating the compression modulus ( E s ) of calcareous sand is theoretically derived. The deformation (Δ s ) of calcareous sand can be calculated using the index parameters obtained through the E s – σ v curve method. In addition, a method for computing the preconsolidation pressure ( p c ) of calcareous sand is introduced. This method uses the parameter ( e b ) as an indicator of particle breakage and has been experimentally validated.

Constitutive Modeling for Two Sands under High Pressure

A constitutive model for crushable sands involving compression and shear induced particle breakage

A Hypoplastic Constitutive Model for Granular Materials with Particle Breakage

Description of critical statefor sands considering particle crushing

A hypoplastic model for crushable sand under a wide range of stress levels

Breakage Critical State of Gravels with Different Gradings. Part II: Constitutive Modelling

Breakage-Dependent Fractional Plasticity Model for Sands

CONSTITUTIVE MODEL FOR SAND BASED ON THE CRITICAL STATE

Particle Breakage of Granular Soils: Changing Critical State Line and Constitutive Modelling

Micromechanics-based multimechanism bounding surface model for sands

A State-Dependent Constitutive Model for Coarse-Grained Gassy Soil and Its Application in Slope Instability Modelling

Study on Modified Dynamic Constitutive Model for Calcareous Sand considering Particle Breakage

Bounding Surface Plasticity Model for Stress-Strain and Grain-Crushing Behaviors of Rockfill Materials

A Constitutive Model for the State-Dependent Behaviors of Rockfill Material Considering Particle Breakage

Constitutive Modeling for Biocemented Calcareous Sands

Three-dimensional multi-mechanism bounding surface model for sands

A Constitutive Model for Granular Materials Subjected to a Large Stress Range

A Basic Constitutive Model for Sands

Extended Critical State Constitutive Model for Sand Based on Unified Hardening Parameter

A critical state model for sands dependent on stress and density

Effects of Particle Breakage on the Mechanical Behavior of Calcareous Sand Under Confined Compression Tests