Abstract:Crack initiation is the premise of fracture. Various analytical models are available to elucidate its mechanisms, but some require many details that may not be suitable for engineering practice or some specify a single crack that is not applicable for a large number of distributed cracks. To fill this research gap, this paper aims to develop an energy-based crack initiation criterion for viscoelastoplastic materials with a distributed crack system using the energy that can be measured from the test. The composition and formulation of the criterion are determined by studying fracture behaviors and local energy redistribution around cracks in asphalt mixtures as typical viscoelastoplastic materials. The energy in the local nonlinear zone, the energy in the local energy release zones, and the surface energy of the material are identified to constitute the energy-based crack initiation criterion. The energy in the local nonlinear zone and local energy release zones are measured by designing repeated load tests to determine the critical condition for crack initiation, called the endurance limit. The surface energy of an asphalt mixture is composed of the surface energy of cohesion and surface energy of adhesion, which are measured from surface energy tests. Then the criterion is validated using the measured energy components. Statistical analysis is conducted on eight different types of asphalt mixtures and proves that the criterion is balanced at the point of crack initiation. The energy-based crack initiation criterion, along with repeated load tests, can act as a substitute for surface energy tests. Depending on the cracking pattern in the material, the surface energy solved from the criterion is the surface energy of cohesion, the surface energy of adhesion, or the combined product of both. When there is both cohesive and adhesive cracking, the calculated surface energy from the criterion can be used to separate cohesive cracking and adhesive cracking in the same material. (C) 2014 American Society of Civil Engineers.

A Strain Energy-Based Parameter for Predicting the Crack Initiation Angle of Mixed Mode Fracture

Energy-Based Crack Initiation Criterion for Viscoelastoplastic Materials with Distributed Cracks

A New Criterion Based on the Ratio of Strain Energy Density for Mixed-Mode Crack Initiation Prediction in Ductile Materials

3D-generalized maximum tangential strain criterion for predicting mixed-mode I/II/III fracture initiation of brittle materials considering T-stress effects

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

A Mode-Adjustable Phase-Field Model for Brittle Fracture by Regulating Distortional Crack Driving Energy

A Phase Field Model with the Mixed-Mode Driving Force of Power-Law Relation

New Constraint Parameters Based on Crack Tip Plastic Zone: Theoretical Derivations and Effectiveness Verification

A Plastic Fracture Mechanics Model for Characterization of Multiaxial Low-Cycle Fatigue

A Generalized Maximum Energy Release Rate Criterion for Mixed Mode Fracture Analysis of Brittle and Quasi-Brittle Materials

Unified Constraint Parameter Based on Crack-Tip Opening Displacement

Crack Initiation Behavior of Functionally Graded Piezoelectric Material: Prediction by the Strain Energy Density Criterion

Evaluation of criteria of I-II mixed crack angles

Theoretical solutions for 2D mode-I crack-tip stress fields in power-law plastic materials based on the stress factor derived from the developed median-energy-density equivalence method

A Homogenization-Based Phase Field Approach to Fracture with Explicit Dependence on Local Crack Orientation

Ductile Fracture Prediction Based on J-integral and Unified Constraint Parameters for Cracked Pipes

A Modified 3D G-criterion for the Prediction of Crack Propagation under Mixed Mode I-III Loadings

A phase field model for ductile fracture considering the strain rate, stress triaxiality and Lode angle parameter

The effect of dilatational and distortional strain energy density on crack initiation

Unified parameter of in-plane and out-of-plane constraint effects and its correlation with brittle fracture toughness of steel

Determination of Mode-Ii Critical Energy Release Rate Using Mixed-Mode Phase-Field Model