Abstract:The maglev linear motor has three degrees of motion freedom, which are respectively realized by the thrust force in the x-axis, the levitation force in the z-axis and the torque around the y-axis. Both the thrust force and levitation force can be seen as the sum of the forces on the three windings. The resultant thrust force and resultant levitation force are independently controlled by d-axis current and q-axis current respectively. Thus, the commonly used dq transformation control strategy is suitable for realizing the control of the resultant force, either thrust force and levitation force. However, the forces on the three windings also generate additional torque because they do not pass the mover mass center. To realize the maglev system high-precision control, a maglev linear motor with a new structure is proposed in this paper to decrease this torque. First, the electromagnetic model of the motor can be deduced through the Lorenz force formula. Second, the analytic method and finite element method are used to explore the reason of this additional torque and what factors affect its change trend. Furthermore, a maglev linear motor with a new structure is proposed, with two sets of 90 degrees shifted winding designed on the mover. Under such a structure, the mover position dependent periodic part of the additional torque can be offset. Finally, the theoretical analysis is validated by the simulation result that the additionally generated rotating torque can be offset with little fluctuation in the proposed new-structure maglev linear motor. Moreover, the control system is built in MATLAB/Simulink, which shows that it has small thrust ripple and high-precision performance.

Torque Calculation Model and Structural Optimisation of Axial Magnetic Drive Mechanism

Multi-Structural Optimization of Bearingless Permanent Magnet Slice Motor Based on Virtual Prototype in Ansoft Maxwell

Research on the Rotary-Linear Motion Magnetic Gear Based on Ansys

A Methodology and Model for the Optimal Torque of Torsional Electromagnetic Actuators

Thermal Optimization of a Totally Enclosed Forced Ventilated Permanentmagnet Traction Motor Using Lumped Parameter and Partial Computational Fluid Dynamics Modeling

Principle and Analysis of Structure of Low-Speed High-Torque Gear Meshing Motor Driven by Radial Force

Investigation of Novel Axially Magnetized Vernier Permanent-Magnet Machine in Cascade Structure

Torque Analysis of Magnetic-Field-Modulated Double-Rotor Machines with Virtual Work Method

Improved Analytical Model for Flux-linkage Calculation of a Direct Drive Electromechanical Actuator with Rotor Eccentricity

Torque optimization strategy for outer rotor permanent magnet brushless DC motor based on metamodel and CRITIC–TOPSIS method

Torque and minimum dimension of axial-magnetized permanent magnet micromotor

An Optimized Magnet Circuit Design to Reduce Power Consumption for Torsional Electromagnetic Actuators

Analysis And Design Of A Maglev Permanent Magnet Synchronous Linear Motor To Reduce Additional Torque In Dq Current Control

Magnetic Equivalent Circuit Modeling of Yokeless Axial Flux Permanent Magnet Machine with Segmented Armature

Structure Design and Optimization of Thrust Magnetic Bearing for the High-Speed Motor

Modeling and Analysis of a Transverse-Flux Flux-Reversal Motor

Magnetic Equivalent Circuit Model for a Two Degree-of-Freedom Rotary-Linear Machine with Transverse Flux Structure

Analysis of Multi-Objective Optimization Design of Interior Double Radial and Tangential Combined Magnetic Pole Permanent Magnet Drive Motor for Electric Vehicles

Research on a novel axial-flux magnetic-field-modulated brushless double-rotor machine with low axial force and high efficiency

Modeling and Analysis of Moving-Magnet Transverse-Flux Linear Oscillatory Motor