Abstract:The main purpose of this work is to explore the influences of microstructures on the magnetic properties, as well as the formation mechanism of -Fe2O3/NiO core/shell nanoflowers. The synthesis of nanoflower-like samples includes three processes. Firstly, Fe3O4 nanospheres are synthesized by the solvothermal reaction of FeCl3 dissolved in ethylene glycol and NaAc. Secondly, Fe3O4/Ni(OH)2 core/shell precursor is fabricated by solvothermal method through using the early Fe3O4 spheres and Ni(NO3)26H2O in an ethanol solution. Finally, the precursor Fe3O4/Ni(OH)2 is calcined in air at 300 ℃ for 3-6 h, and therefore resulting in -Fe2O3/NiO core/shell nanoflowers. Their microstructures are characterized by using XRD, XPS, SEM, HRTEM and SAED techniques. The results show that the final powder samples are -Fe2O3/NiO with typical core/shell structure. In this core/shell system, the -Fe2O3 sphere acts as core and the NiO acts as shell, which are comprised of many irregular flake-like nanosheets with monocrystalline structure, and these nanosheets are packed together on the surfaces of -Fe2O3 spheres. The calcination time of Fe3O4/Ni(OH)2 precursor has significant influences on the grain growth, the NiO content and the compactness of NiO shells in the -Fe2O3/NiO core/shell system. VSM and SQUID are used to characterize the magnetic properties of -Fe2O3/NiO core/shell nanoflowers. The results indicate that the 3 h-calcined sample displays better ferromagnetic properties (such as higher ms and smaller HC) because of their high -Fe2O3 content. In addition, as the coupling interaction between the FM -Fe2O3 and AFM NiO components, we observe that the -Fe2O3/NiO samples formed in 3 h and 6 h display certain exchange bias (HE=20 and 46 Oe, respectively). Such a coupling effect allows a variety of reversal paths for the spins upon cycling the applied field, and thereby resulting in the enhancement of coercivity (HC(FC)=252 and 288 Oe, respectively). Further, the values of HE and HC for the former are smaller than those of the latter, this is because of the AFM NiO content in 6 h-calcined sample much higher than that in 3 h-calcined sample. Especially, the temperature dependences of the magnetization M of the two samples under both ZFC and FC conditions indicate that an extra anisotropy is induced. In a word, the size effect, NiO phase content, and FM-AFM (where FM denotes the ferromagnetic -Fe2O3 component, while AFM is the antiferromagnetic NiO component) interface coupling effect have significant influence on the magnetic properties of -Fe2O3/NiO core/shell nanoflowers.

Shape-controlled Synthesis of Flake-Like FeNi3 Nanoparticles Based on Sodium Lignosulfonate

Synthesis of iron–nickel nanoparticles via a nonaqueous organometallic route

Size- and Structure-Controlled Synthesis and Characterization of Nickel Nanoparticles

Chemical Synthesis of Monodisperse Fe-Ni Nanoparticles Via A Diffusion-Based Approach

Evolution from Amorphous to Nanocrystalline and Corresponding Magnetic Properties of Fe-Si-B-Cu-Nb Alloys by Melt Spinning and Spark Plasma Sintering

Crystallization kinetics and magnetic properties of Fe 63.5Co10Si13.5B9Cu 1Nb3 nanocrystalline powder cores

Enhancing soft magnetic characteristics of dense submicron FeNi particles with low carbon content by swirler connector assisted spray pyrolysis

Direct and Alternating Current Magnetic Properties of FeNi Particles Coated with SiO2

Synthesis and Magnetic Properties of Size-Controlled FeNi Alloy Nanoparticles Attached on Multiwalled Carbon Nanotubes

Single-Step Synthesis of Nanocrystalline Fe-Ni/Fe-Co-Ni Magnetic Alloy Coating via Directional Plasma Spray

Phase formations and magnetic properties of single crystal nickel ferrite (NiFe2O4) with different morphologies

Effects on Direct Synthesis of Large Scale Mono-Disperse Ni0.5zn0.5fe2o4 Nanosized Particles

Improved Ferromagnetic Properties of Electrospun NiFe2O4 with Tunable Morphology: from Multiparticle-Chain to Single-Particle-chain

Magnetic Behavior of Virgin and Lithiated NiFe2O4 Nanoparticles

Facile Synthesis of Superparamagnetic Ni-Fe Ultrafine Nanoalloy Nanoparticles with Equilibrium Ordered Phase Structure Via A Sol-Gel Process

Synthesis, Microstructure, and Magnetic Properties of -Fe2o3/nio Core/shell Nanoflowers

Standardizing Size- and Shape-Controlled Synthesis of Monodisperse Magnetite (Fe3O4) Nanocrystals by Identifying and Exploiting Effects of Organic Impurities

Structural and Magnetic Characterization of Ni-Co Mixed Ferrite Nanopowders Synthesized via Coprecipitation and Sol-Gel Methods

Near net shape fabrication of anisotropic Fe-6.5%Si soft magnetic materials

Controlled Synthesis of Magnetic Spinel-Type Nickel Ferrite Nanoparticles by the Interface Reaction and Hydrothermal Crystallization

Ferromagnetic Behaviors in NiO-based Nanofibers Synthesized by Electrospinning Method