Pt–Pd Bimetallic Effect in PtxPd1−x/(Ce,Zr,La)O2 Catalysts for NOx, HC and CO Elimination

Ting Wang,Kai Chen,Renxian Zhou

DOI: https://doi.org/10.1039/d0cy02362k

IF: 6.177

2021-01-01

Catalysis Science & Technology

Abstract:The bimetallic catalysts show the alloy structure and the surplus precious metals presented as isolated PMOx species.

What problem does this paper attempt to address?

Pt–Pd bimetallic effect in Pt x Pd 1−x /(Ce,Zr,La)O 2 catalysts for NO x , HC and CO elimination

Ting Wang,Kai Chen,Renxian Zhou

DOI: https://doi.org/10.1039/d0cy02362k

2021-01-01

Abstract:The bimetallic catalysts show the alloy structure and the surplus precious metals presented as isolated PMO x species.

chemistry, physical
Pt–Pd bimetallic effect in PtxPd1−x/(Ce,Zr,La)O2 catalysts for NOx, HC and CO elimination

Ting Wang,Kai Chen,Renxian Zhou

DOI: https://doi.org/10.1039/d0cy02362k

2021-01-01

Abstract:The bimetallic catalysts show the alloy structure and the surplus precious metals presented as isolated PMOx species.
CO and Methane Oxidation Over CeXZr1-XO2 Mixed Oxide Supported PdO Catalysts

Lei Ma,Meng-Fei Luo,Li-Feng Han,Song-Ying Chen

DOI: https://doi.org/10.1023/A:1010313605332

2000-01-01

Reaction Kinetics and Catalysis Letters

Abstract:In this paper, the Ce X Zr 1-X O 2 -supported PdO catalysts were prepared and the effect of Ce/Zr ratio on catalytic activity for CO and methane oxidation was studied, both activity and the reduction behavior of catalyst depend on the Ce/Zr ratio. The reduction behavior of those catalysts was characterized by means of TPR.
Effect of Ce/Zr Atomic Ratio on the TWC Properties of PdO/CexZr1-xO2(x=0-1.0) Catalysts

Ma Lei,Lu Chunshan,Zhang Qunfeng,Li Xiaonian

2010-01-01

Rare Metal Materials and Engineering

Abstract:The CexZr1-xO2 (x=0-1) composite oxides were prepared by sol-gel method, and then they were used as supportpr tp prepare PdO/CexZr1-xO2 catalysts. The effect of Ce/Zr atomic ratio on the structure of crystalline phase, redox property and TWC catalytic activity of CexZr1-xO2 composite oxides and PdO/CexZr1-xO2 catalysts were studied. The results show that phase structure of CexZr1-xO2 composite oxide depends on the CeO2 content. The different Ce/Zr atomic ratio affects the catalytic activity of PdO/CexZr1-xO2 catalysts much. In the reaction of NO-CO and CO-O-2, the catalytic activity of PdO/Ce0.8Zr0.2O2 catalyst is the highest. However, the catalytic activity of PdO/Ce0.5Zr0.5O2 catalyst is the highest in the reaction of CH4-O-2. The alpha: H-2-TPR peak is related probably to the NO-CO and CO-O-2 catalytic activity of PdO/Ce0.8Zr0.2O2 catalysts.
Strong Local Coordination Structure Effects on Subnanometer PtOx Clusters over CeO2 Nanowires Probed by Low-Temperature CO Oxidation

Jun Ke,Wei Zhu,Yingying Jiang,Rui Si,Yan-Jie Wang,Shuai-Chen Li,Chuanhong Jin,Haichao Liu,Wei-Guo Song,Chun-Hua Yan,Ya-Wen Zhang

DOI: https://doi.org/10.1021/acscatal.5b00832

IF: 12.9

2015-01-01

ACS Catalysis

Abstract:A fundamental understanding of the structural effects of supported metal catalysts at the molecular level is extremely important for developing high-performance catalysts that are widely used in industry, which is still a longstanding attractive but challenging topic in multidisciplinary fields. In this work, we report the strong effects of local coordination structures on the catalytic activity of subnanometric PtOx clusters over CeO2 nanowires in low-temperature CO oxidation as a probe reaction. Atoms and subnanometric clusters of Pt were deposited to form the coordination structure of PtOx on the well-defined CeO2 nanowires with mainly exposed (110) facets. The reactivity of active sites and the variation of the local coordination structures of the PtOx sites were deeply investigated with in situ spectroscopic experiments, assisted by density functional theory simulations. According to our observation, although the highly dispersed Pt sites at the subnanometric scale could provide increased accessible sites, some of the Pt sites did not show high activity for CO oxidation due to the increased surrounding oxygen that seemed to overstabilize the Pt atoms. An increased proportion of both adsorbed CO intermediates on oxidized Pt sites and the interfacial lattice oxygen of PtOx clusters tended to become inactive on samples with a high coordination number of oxygen bonded to Pt sites (CN(Pt-O)), leading to the loss of effective active sites and a decrease in the catalytic activity. A relatively small CN(Pt-O) value in the subnanometric PtOx/CeO2 NWs, which was found to be the appropriate structure for their catalytic performance, remarkably increased the activity by about 1/2 order of magnitude. We believe our investigation on the interfacial coordination structure effects of subnanometric PtOx clusters dispersed on CeO2 nanowires can provide some new basic chemical insights into the metal-support interfacial interactions of Pt/CeO2 catalysts for understanding their catalytic performance in some relevant reactions.
Construction of bimetallic Pt–Pd/CeO2–ZrO2–La2O3 catalysts with different Pt/Pd ratios and its structure–activity correlations for three-way catalytic performance

Kai Chen,Jie Wan,Ting Wang,Qi Sun,Renxian Zhou

DOI: https://doi.org/10.1016/j.jre.2022.10.014

IF: 4.632

2022-11-01

Journal of Rare Earths

Abstract:A series of Pt–Pd bimetallic catalysts supported on CeO2–ZrO2–La2O3 mixed oxides were synthesized through the conventional impregnation method. Three-way catalytic performance evaluations along with detailed physio-chemical characterizations were carried out to establish possible structure–activity correlations. Results show that on the one hand, different Pt/Pd ratios can strongly affect the TWC behaviors of Pt–Pd/CZL catalysts by modulating the synergistic effect between Pt and Pd. On the other hand, higher Pt/Pd ratio also favors better dispersion of precious metals. Such improved precious metals (PM) dispersion can promote the metal-support interaction and increase the surface oxygen vacancies concentration, thereby raising the dynamic oxygen storage/release capacity, improving the redox ability as well as enhancing the thermal stability of the Pt–Pd/CZL catalyst. Moreover, the strong metal-support interaction can augment surface oxygen vacancy concentration, thereby benefiting low temperature CO and NO reaction via augmented NO x adsorption and nitrate conversion.

chemistry, applied
Effect of PdO Structure Properties on Catalytic Performance of Pd/Ce0.67Zr0.33O2 Catalyst for CO, HC and NO Elimination

Ting Wang,Xiaolin Guo,Siyu Lin,Renxian Zhou

DOI: https://doi.org/10.1016/j.jre.2018.10.017

IF: 4.632

2019-01-01

Journal of Rare Earths

Abstract:Pd/Ce0.67Zr0.33O2 catalyst was pretreated in different atmosphere respectively, and characterized by CO chemical adsorption, XPS, HR-TEM, H2-TPR, Raman, OSC and in situ DRIFTs to investigate the effect of the structure properties of PdOx species on the catalytic performance for CO, HC and NOx elimination. The results show that Pd/CZ catalyst pretreated in air atmosphere has higher oxidation activity of HC due to having high Pd dispersion and strong interaction between PdOx and CZ support. Pd/CZ-H catalyst pretreated in reducing atmosphere exhibits better catalytic performance of NOx elimination because of having relatively big Pd particle size, more Pd species in metallic state and higher concentration of oxygen vacancies. While for the Pd/CZ-RG catalyst pretreated in reactant atmosphere, strong adsorption of HC species on the surface of catalysts would lead to a part of active sites being covered, which inhibits HC and NO conversions.
Optimizing the Synergy Between Alloy and Alloy-Oxide Interface for CO Oxidation in Bimetallic Catalysts.

Ya Pan,Liuxin Xu,Wenxue He,Hongmei Li,Wei Chen,Zhihu Sun

DOI: https://doi.org/10.1039/d2nr01171a

IF: 6.7

2022-01-01

Nanoscale

Abstract:Creating synergetic metal-oxide interfaces is a promising strategy to promote the catalytic performance of heterogeneous catalysts. However, this strategy has been mainly applied to monometallic catalysts, while scarcely applied to alloy catalysts. In this work, we present a comprehensive study on the synergetic alloy-oxide interfaces in the bimetallic Pt-Co/Al2O3 catalysts for CO oxidation. A series of Pt1Cox/Al2O3 catalysts with various Co/Pt molar ratios with x ranging from 0.5 to 3.8 was synthesized via a facile wet-chemistry strategy. Among them, the Pt1Co0.5/Al2O3 catalyst exhibits the best catalytic performance for CO oxidation, with the lowest CO complete conversion temperature of -10 °C and the highest mass specific rate of 2.61 (mol CO) h-1 (g Pt)-1. From in situ X-ray absorption fine structure and diffuse reflectance infrared Fourier-transform spectroscopy studies, the superior catalytic performance of Pt1Co0.5/Al2O3 originates from the optimal length of the three-dimensional alloy-oxide perimeter sites. We further extended this strategy to other bimetallic systems of Pt-Fe and Pt-Ni, which also show similar structural properties and remarkable promotional effects on the catalytic activity.
Bimetallic synergy in cobalt–palladium nanocatalysts for CO oxidation

Cheng Hao Wu,Chang Liu,Dong Su,Huolin L. Xin,Hai-Tao Fang,Baran Eren,Sen Zhang,Christopher B. Murray,Miquel B. Salmeron

DOI: https://doi.org/10.1038/s41929-018-0190-6

IF: 37.8

2018-12-10

Nature Catalysis

Abstract:Bimetallic and multi-component catalysts typically exhibit composition-dependent activity and selectivity, and when optimized often outperform single-component catalysts. Here we used ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) and in situ and ex situ transmission electron microscopy (TEM) to elucidate the origin of composition dependence observed in the catalytic activities of monodisperse CoPd bimetallic nanocatalysts for CO oxidation. We found that the catalysis process induced a reconstruction of the catalysts, leaving CoOx on the nanoparticle surface. The synergy between Pd and CoOx coexisting on the surface promotes the catalytic activity of the bimetallic catalysts. This synergistic effect can be optimized by tuning the Co/Pd ratios in the nanoparticle synthesis, and it reaches a maximum at compositions near Co0.24Pd0.76, which achieves complete CO conversion at the lowest temperature. Our combined AP-XPS and TEM studies provide direct observation of the surface evolution of the bimetallic nanoparticles under catalytic conditions and show how this evolution correlates with catalytic properties.

chemistry, physical
Understanding Structure-Performance Relationships of CoOx/CeO2 Catalysts for NO Catalytic Oxidation: Facet Tailoring and Bimetallic Interface Designing.

Xiaomin Cheng,Yiqi Liu,Lubin Yang,Mingjie Yang,Yongzheng Zhang,Cheng Ma,Xuan Meng,Jing Xu,Jitong Wang,Wenming Qiao

DOI: https://doi.org/10.1016/j.jhazmat.2023.131144

IF: 13.6

2023-01-01

Journal of Hazardous Materials

Abstract:Crystalline structure and bimetallic interaction of metal oxides are essential factors to determine the catalytic activity. Herein, three different CoOx/CeO2 catalysts, employing CeO2 nanorods (predominately exposed {110 facet), CeO2 nanopolyhedra ({111} facet) and CeO2 nanocubes ({100} facet) as the supports, are successfully prepared for investigating the effect of exposed crystal facets and bimetallic interface interaction on NO oxidation. In comparison with the {111} and {100} facets, the exposed crystal facet {110} exists the best superiority to anchor and stabilize Co species. Moreover, ultra-small CoOx clusters composed of strong Co-O coordination shells with minor Co-O-Ce interaction are formed and uniformly dispersed on the CeO2 nanorods. Structural characterizations reveal that the active exposed crystal facet {110} and the strong bimetallic interface interaction in CoOx/CeO2-nanorods (R-CC) result in more structural defect, endowing it with abundant oxygen vacancies, excellent reducibility and strong adsorption capacity. The DRIFTs spectra further indicate that the exposed crystal facet {110} has a significant promoting effect on the strength of nitrates compared with {111} and {100} facets. The bimetallic interface interaction not only significantly facilitates the formation of nitrate species at lower temperature, but also effectively suppresses the generation of sulfate and lower the sulphation rate. Therefore, R-CC catalyst exhibits the maximum NO oxidation activity with the conversion of 86.4 % at 300 °C and still sustains its high activity under cyclic condition or 50 ppm SO2. The provided crystalline structure and interaction-enhanced strategy sheds light on the design of high-activity NO oxidation catalysts.
Promotional effect of ZrO2 and WO3 on bimetallic Pt-Pd diesel oxidation catalyst

Rongrong Fan,Zhaoqiang Li,Yu Wang,Yan Wang,Zhiyong Ding,Cheng Zhang,Na Kang,Xin Guo,Rong Wang

DOI: https://doi.org/10.1007/s11356-021-15800-7

IF: 5.8

2021-08-21

Environmental Science and Pollution Research

Abstract:Diesel oxidation catalysts Pt-Pd-(y)ZrO2-(z)WO3/CeZrOx-Al2O3 with total Pt & Pd loading of only 0.68 wt.% were prepared and investigated for oxidation activity and stability of CO, C3H6, and NO. Introduction of ZrO2 greatly improved low-temperature activities and retained stability especially for CO and C3H6 oxidation after treated at 800 °C. With the optimal loading amount of 6 wt% ZrO2, 2 wt% WO3 was introduced to the system and showed higher activity. Reaction temperature for 50% CO and C3H6 conversion declined to 160 and 181 °C, and the maximal NO conversion increased to 50%. By using XRD, TEM, CO chemisorption, XPS, and H2-TPR analysis, it was found that ZrO2 could inhibit aggregation of Pt and Pd, improve metal dispersion, and increase surface-chemisorbed oxygen after high-temperature treatment, accounting for promoted performance. Also, there were more reducible oxide species in ZrO2-doped catalysts. ZrO2 could induce reduction of noble metal oxides and surface ceria by weakening Pt-O-Ce interaction, which increased the ability to dissociate H2 and spillover effect of dissociated hydrogen to ceria. Doping WO3 increased metal dispersion of fresh samples and brought more Pt0 species that were active sites for oxidation reactions. Thus, ZrO2 and WO3 could be effective additives for oxidation catalysts to synergistically improve their activities and thermal stability.

environmental sciences
Large-Pore Mesoporous CeO2 -Zro2 Solid Solutions with In-Pore Confined Pt Nanoparticles for Enhanced CO Oxidation.

Xuanyu Yang,Xiaowei Cheng,Junhao Ma,Yidong Zou,Wei Luo,Yonghui Deng

DOI: https://doi.org/10.1002/smll.201903058

IF: 13.3

2019-01-01

Small

Abstract:Active and stable catalysts are highly desired for converting harmful substances (e.g., CO, NOx ) in exhaust gases of vehicles into safe gases at low exhaust temperatures. Here, a solvent evaporation-induced co-assembly process is employed to design ordered mesoporous Cex Zr1- x O2 (0 ≤ x ≤ 1) solid solutions by using high-molecular-weight poly(ethylene oxide)-block-polystyrene as the template. The obtained mesoporous Cex Zr1- x O2 possesses high surface area (60-100 m2 g-1 ) and large pore size (12-15 nm), enabling its great capacity in stably immobilizing Pt nanoparticles (4.0 nm) without blocking pore channels. The obtained mesoporous Pt/Ce0.8 Zr0.2 O2 catalyst exhibits superior CO oxidation activity with a very low T100 value of 130 °C (temperature of 100% CO conversion) and excellent stability due to the rich lattice oxygen vacancies in the Ce0.8 Zr0.2 O2 framework. The simulated catalytic evaluations of CO oxidation combined with various characterizations reveal that the intrinsic high surface oxygen mobility and well-interconnected pore structure of the mesoporous Pt/Ce0.8 Zr0.2 O2 catalyst are responsible for the remarkable catalytic efficiency. Additionally, compared with mesoporous Pt/Cex Zr1- x O2 -s with small pore size (3.8 nm), ordered mesoporous Pt/Cex Zr1- x O2 not only facilitates the mass diffusion of reactants and products, but also provides abundant anchoring sites for Pt nanoparticles and numerous exposed catalytically active interfaces for efficient heterogeneous catalysis.
Co-sputtered CuPt/Ag alloy nanoparticles and comparative catalytic performance of mono-, bi-, and tri-metallic nanoparticles in oxygen reduction reaction

Mingbei Zhu,Mai Thanh Nguyen,Wei Jian Sim,Tetsu Yonezawa

DOI: https://doi.org/10.1039/d2ma00688j

2022-10-12

Materials Advances

Abstract:CuPt/Ag trimetallic alloy nanoparticles (NPs) were synthesized by co-sputtering onto liquid polyethylene glycol (PEG), using a CuPt alloy target and an Ag target. The fine structure analysis reveals that the obtained NPs are trimetallic solid solution alloy. Ag compositions increased with the increase of sputtering currents applied to Ag target while keeping the sputtering currents applied to CuPt target constant. Moreover, it was found that the Cu:Pt atomic ratios of single NPs measured by energy dispersive spectroscopy (EDS) coupled with scanning transmission electron miscroscope (STEM) were lower than the average value of the sputtered NPs dispersed in PEG. This suggests that NPs which are big enough to be checked by STEM-EDS are mainly Pt-rich NPs. The Cu, Ag, and Pt compositions of trimetallic NPs varied in a wide range, indicating random alloy formation. The sputtered trimetallic CuPt/Ag NPs were studied as catalysts in oxygen reduction reaction (ORR), and the catalytic performance is compared with sputtered bimetallic alloy Cu/Pt and Ag/Pt NPs and monometallic Pt NPs. Trimetallic CuPt/Ag NPs showed higher ORR catalytic activities than bimetallic alloy Cu/Pt NPs owing to their better stability and dispersibility on carbon support. However, the trimetallic alloy NPs performed worse than bimetallic Ag/Pt NPs and Pt NPs. This is caused by Cu oxidation and dissolution of Pt and Cu. Comparable ORR catalytic peformance of Ag/Pt NPs (40 atom% Ag) with Pt NPs is thought to come from the synergy between Pt and Ag in bimetallic alloy.
One-pot Synthesis of Unprotected PtPd Nanoclusters with Enhanced Catalytic Activity, Durability, and Methanol-Tolerance for Oxygen Reduction Reaction

Jing Liu,Jiao Yin,Bo Feng,Fan Li,Fu Wang

DOI: https://doi.org/10.1016/j.apsusc.2018.12.072

IF: 6.7

2018-01-01

Applied Surface Science

Abstract:Bimetallic PtPd alloys are regarded as promising high performance oxygen reduction reaction (ORR) catalysts. However, the application of a subnanometer scale PtPd bimetallic nanoclusters (NCs) is rarely studied. In this work, ordered mesoporous carbon (OMC) supported PtPd NCs with the constant metal loading of 10 wt% and various Pt:Pd atomic ratios were synthesized by a modified polyol reduction route. The PtPd NCs show a maximum activity at Pt:Pd molar ratio close to 3:1 with a mean size of similar to 2.35 nm. The specific activity (SA) and mass activity (MA) of Pt3Pd1 NCs/OMC (PtPd loading: 10 wt %) is 2.5 and 4.1 times higher than those of the commercial PVC (Pt loading: 20 wt%) in 0.1 M HClO4. Meanwhile, the Pt3Pd1 NCs/OMC exhibits improved methanol tolerance and durability for ORR. Therefore, the Pt3Pd1 NCs/OMC is excellent candidate that may become a practical cathode catalyst for fuel cells.
Pt-Embedded CuO X-Ceo2 Multicore-Shell Composites: Interfacial Redox Reaction-Directed Synthesis and Composition-Dependent Performance for CO Oxidation.

Ke Wu,Xin-Pu Fu,Wen-Zhu Yu,Wei-Wei Wang,Chun-Jiang Jia,Pei-Pei Du,Rui Si,Yu-Hao Wang,Lin-Dong Li,Liang Zhou,Ling-Dong Sun,Chun-Hua Yan

DOI: https://doi.org/10.1021/acsami.8b10496

IF: 9.5

2018-01-01

ACS Applied Materials & Interfaces

Abstract:Exploring the state-of-the-art heterogeneous catalysts has been a general concern for sustainable and clean energy. Here, Pt-embedded CuO x-CeO2 multicore-shell (Pt/CuO x-CeO2 MS) composites are fabricated at room temperature via a one-pot and template-free procedure for catalyzing CO oxidation, a classical probe reaction, showing a volcano-shaped relationship between the composition and catalytic activity. We experimentally unravel that the Pt/CuO x-CeO2 MS composites are derived from an interfacial autoredox process, where Pt nanoparticles (NPs) are in situ encapsulated by self-assembled ceria nanospheres with CuO x clusters adhered through deposition/precipitation-calcination process. Only Cu-O and Pt-Pt coordination structures are determined for CuO x clusters and Pt NPs in Pt/CuO x-CeO2 MS, respectively. Importantly, the close vicinity between Pt and CeO2 benefits to more oxygen vacancies in CeO2 counterparts and results in thin oxide layers on Pt NPs. Meanwhile, the introduction of CuO x clusters is crucial for triggering synergistic catalysis, which leads to high resistance to aggregation of Pt NPs and improvement of catalytic performance. In CO oxidation reaction, both Ptδ+-CO and Cu+-CO can act as active sites during CO adsorption and activation. Nonetheless, redundant content of Pt or Cu will induce a strongly bound Pt-O-Ce or Cu-[O x]-Ce structures in air-calcinated Pt/CuO x-CeO2 MS composites, respectively, which are both deleterious to catalytic reactivity. As a result, the composition-dependent catalytic activity and superior durability of Pt/CuO x-CeO2 MS composites toward CO oxidation reaction are achieved. This work should be instructive for fabricating desirable multicomponent catalysts composed of noble metal and bimetallic oxide composites for diverse heterogeneous catalysis.
Effects of Platinum or Palladium on Structure and Properties of Cr/ZrO2 Catalyst

Tie-ming YU,Ren-xian ZHOU,Zhong-min TANG,Xiao-ming ZHENG

DOI: https://doi.org/10.3321/j.issn:1000-8144.1999.07.006

1999-01-01

Abstract:A series of ZrO2-supported Cr-M bimetallic and mono-metallic catalysts were prepared by impregnation method. The results of CO oxidation activity show that there is obvious synergetic effect between noble metals and Cr2O3 phases. The synergetic effect between Pd and Cr is more obvious than that between Pt and Cr. Both results of XRD and TPR indicate that there is strong interaction between Cr and ZrO2, which restrains the growth of fine particles of ZrO2 and the phase transformation of t-ZrO2 to m-ZrO2. The addition of small amounts of Pt or Pd to Cr/ZrO2 improves the reduction of Cr2O3 phase. The effects of small amounts of Pt or Pd on Cr/ZrO2 are discussed.
The Promotional Effect of Transition Metals on the Catalytic Behavior of Model Pd/Ce0.67Zr0.33O2 Three-Way Catalyst

Guangfeng Li,Qiuyan Wang,Bo Zhao,Renxian Zhou

DOI: https://doi.org/10.1016/j.cattod.2010.05.001

IF: 5.3

2010-01-01

Catalysis Today

Abstract:The behavior of Pd-only three-way catalysts supported on Ce0.67Zr0.33O2 mixed oxides (CZ) doped by transition metals (M=Cr, Mn, Fe, Co, Ni) (Pd/CZM) have been examined under stoichiometric CO+HC+NOx+O2 reaction conditions and characterized. Different characterization techniques reveal that transition metal ions have entered into the ceria lattice and atomically more homogeneous mixed oxides have formed on the order of CZFe≈CZCo>CZNi≈CZ>CZMn>CZCr. It is confirmed that the homogeneity of ternary solid solution clearly modifies the properties of the samples and the catalytic behavior of the corresponding catalysts. The introduction of transition metals especially doped Fe and Co improves the oxygen mobility and strongly enhances the oxygen storage capacity of CZ and the corresponding catalysts. Moreover, the addition of Fe and Co into CZ forms more homogeneous Ce–Zr–M–O ternary solid solution and simultaneously promotes the reduction of CZ and Pd noble metal, respectively. It is worthwhile to note that it has a strong interaction between transition metals and Pd noble metal. Furthermore, the presence of Fe and Co obviously decreases the light-off temperature and significantly enhances the catalytic activity of the catalysts. Simultaneously, the windows of activity over Pd/CZFe and Pd/CZCo catalysts become wider compared to that of Pd/CZ.
Synergistic Effects of Ternary PdO-CeO2-OMS-2 Catalyst Afford High Catalytic Performance and Stability in the Reduction of NO with CO

Song Guo,Guomei Zhang,Zhong-Kang Han,Shaoyang Zhang,Debalaya Sarker,Wen Wu Xu,Xiaoli Pan,Gao Li,Alfons Baiker

DOI: https://doi.org/10.1021/acsami.0c18451

IF: 9.5

2021-01-01

ACS Applied Materials & Interfaces

Abstract:We developed a robust ternary PdO-CeO2-OMS-2 catalyst with excellent catalytic performance in the selective reduction of NO with CO using a strategy based on combining components that synergistically interact leading to an effective abatement of these toxic gases. The catalyst affords 100% selectivity to N2 at the nearly full conversion of NO and CO at 250 °C, high stability in the presence of H2O, and a remarkable SO2 tolerance. To unravel the origin of the excellent catalytic performance, the structural and chemical properties of the PdO-CeO2-OMS-2 nanocomposite were analyzed in the as-prepared and used state of the catalyst, employing a series of pertinent characterization methods and specific catalytic tests. The experimental as well as theoretical results, based on density-functional theory calculations suggest that CO and NO follow different reaction pathways, CO is preferentially adsorbed and oxidized at Pd sites (PdII and Pd0), while NO decomposes on the ceria surface. Lattice oxygen vacancies at the interfacial perimeter of PdO-CeO2 and PdO-OMS-2, and the diffusion of oxygen and oxygen vacancies are proposed to play a critical role in this multicenter reaction system.
Redox properties and metal–support interaction of Pd/Ce0.67Zr0.33O2–Al2O3 catalyst for CO, HC and NOx elimination

Siyu Lin,Linyan Yang,Xue Yang,Renxian Zhou

DOI: https://doi.org/10.1016/j.apsusc.2014.03.153

IF: 6.7

2014-01-01

Applied Surface Science

Abstract:Ce0.67Zr0.33 02, Ce0.67Zr0.3302-Al203 and -y-Al203 supported Pd catalysts (designated as Pd/CZ, Pd/CZA and Pd/Al2 03) have been characterized by XRD, CO chemisorption, in situ DRIFTS, XPS, HRTEM, H2-TPR, 02-TPSR and catalytic performance test. The results show that the small Pd0, particles dispersed in CZ would promote the conversion of HC, CO and NO2, while the Pd0, particles dispersed in Al203 promote the conversion of NO in the light-off process. Pd0, species mainly disperse on Al203-rich grains surface for fresh Pd/CZA catalyst, but easily migrate onto CZ-rich grains surface due to the strong interaction between Pd and ceria-based oxide under high temperature reaction conditions. And it promotes the thermal stability of Pd 0 species and resilience of Pd to Pd 0, therefore enhances the catalytic performance for HC, CO and NO elimination. Meanwhile, the interaction between CZ and Al203 can be enhanced after aging treatment, resulting in increasing the thermal stability of Pd/CZA catalyst. 2014 Elsevier B.V. All rights reserved.
Carbon Monoxide and Propylene Catalytic Oxidation Activity of Noble Metals (M = Pt, Pd, Ag, and Au) Loaded on the Surface of Ce0.875Zr0.125O2 (110)

Chenxi Zhang,Xuesong Cao,Lili Guo,Zhihao Fang,Di Feng,Xiaomin Sun

DOI: https://doi.org/10.3390/catal13121505

IF: 3.9

2023-12-11

Catalysts

Abstract:With the advances in engine technology, the exhaust gas temperature of automobiles has further reduced, which in turn leads to an increase in the emissions of carbon monoxide (CO) and hydrocarbons (HCs). In order to understand the influence of CeO2-based catalysts loaded with different noble metals on the catalytic oxidation activity of CO and HCs, this study constructed catalyst models of Ce0.875Zr0.125O2 (100) surfaces loaded with Pt, Pd, Ag, and Au. The electronic density and state density structures of the catalysts were analyzed, and the reaction energy barriers for CO oxidation and C3H6 dehydrogenation oxidation on the catalyst surfaces were also calculated. Furthermore, the activity sequences of the catalysts were explored. The results revealed that after loading Pt, Pd, Ag, and Au atoms onto the catalyst surfaces, these noble metal atoms exhibited strong interactions with the catalyst surfaces, and electron transfer occurred between the noble metal atoms and the catalyst surfaces. Loading with noble metals can enhance the catalytic activity of CO oxidation, but it has little effect on the dehydrogenation oxidation of C3H6. Of the different noble metals, loading with Pd exhibits the best catalytic activity for both CO and C3H6 oxidation. This study elucidated the influence of noble metal doping on the catalytic activity of catalysts at the molecular level, providing theoretical guidance for the design of a new generation of green and efficient catalysts.

chemistry, physical

Pt–Pd Bimetallic Effect in PtxPd1−x/(Ce,Zr,La)O2 Catalysts for NOx, HC and CO Elimination

Pt–Pd bimetallic effect in Pt x Pd 1−x /(Ce,Zr,La)O 2 catalysts for NO x , HC and CO elimination

Pt–Pd bimetallic effect in Pt<sub>x</sub>Pd<sub>1−x</sub>/(Ce,Zr,La)O<sub>2</sub> catalysts for NO<sub>x</sub>, HC and CO elimination

CO and Methane Oxidation Over CeXZr1-XO2 Mixed Oxide Supported PdO Catalysts

Effect of Ce/Zr Atomic Ratio on the TWC Properties of PdO/CexZr1-xO2(x=0-1.0) Catalysts

Strong Local Coordination Structure Effects on Subnanometer PtOx Clusters over CeO2 Nanowires Probed by Low-Temperature CO Oxidation

Construction of bimetallic Pt–Pd/CeO2–ZrO2–La2O3 catalysts with different Pt/Pd ratios and its structure–activity correlations for three-way catalytic performance

Effect of PdO Structure Properties on Catalytic Performance of Pd/Ce0.67Zr0.33O2 Catalyst for CO, HC and NO Elimination

Optimizing the Synergy Between Alloy and Alloy-Oxide Interface for CO Oxidation in Bimetallic Catalysts.

Bimetallic synergy in cobalt–palladium nanocatalysts for CO oxidation

Understanding Structure-Performance Relationships of CoOx/CeO2 Catalysts for NO Catalytic Oxidation: Facet Tailoring and Bimetallic Interface Designing.

Promotional effect of ZrO2 and WO3 on bimetallic Pt-Pd diesel oxidation catalyst

Large-Pore Mesoporous CeO2 -Zro2 Solid Solutions with In-Pore Confined Pt Nanoparticles for Enhanced CO Oxidation.

Co-sputtered CuPt/Ag alloy nanoparticles and comparative catalytic performance of mono-, bi-, and tri-metallic nanoparticles in oxygen reduction reaction

One-pot Synthesis of Unprotected PtPd Nanoclusters with Enhanced Catalytic Activity, Durability, and Methanol-Tolerance for Oxygen Reduction Reaction

Pt-Embedded CuO X-Ceo2 Multicore-Shell Composites: Interfacial Redox Reaction-Directed Synthesis and Composition-Dependent Performance for CO Oxidation.

Effects of Platinum or Palladium on Structure and Properties of Cr/ZrO2 Catalyst

The Promotional Effect of Transition Metals on the Catalytic Behavior of Model Pd/Ce0.67Zr0.33O2 Three-Way Catalyst

Synergistic Effects of Ternary PdO-CeO2-OMS-2 Catalyst Afford High Catalytic Performance and Stability in the Reduction of NO with CO

Redox properties and metal–support interaction of Pd/Ce0.67Zr0.33O2–Al2O3 catalyst for CO, HC and NOx elimination

Carbon Monoxide and Propylene Catalytic Oxidation Activity of Noble Metals (M = Pt, Pd, Ag, and Au) Loaded on the Surface of Ce0.875Zr0.125O2 (110)