Abstract:Recently, the tribological characteristics of rubber elastomers have attracted widespread attention of researchers due to its destructive character and its high frequency of occurrence. However, most experiments were performed by using relatively smooth mating surfaces and did not consider the effect of the surface roughness of the harder counter surface, which could be important in practical applications. This study is devoted to investigate the effect of surface roughness on friction and wear behaviour of elastomer. Various kinds of rough mating surfaces with different surface roughness from Ra = 0.5 to Ra = 0.003 on the steel plates were attained, and the reciprocating sliding tests were performed on a NBR pin against a steel plate. The friction coefficients obtained when the rubber slid against the different textured surfaces were analysed and compared. The morphologies of the NBR worn surface were examined by using scanning electron microscopy. On the basis, the optimal surface roughness values of the metal counterpart are proposed for the rubber sliding against the metal. In addition, Stribeck-like curves are obtained and their characteristics are discussed. A series of experimental results are presented to examine the effect of surface roughness on the Stribeck curves. The results show that surface roughness had a significant effect on the lubrication regime and tribological behaviours of the NBR. Overall, the rougher the surface of the counterpart is, the more easily the friction pairs enter into the ML regime. The surface damage of rubber depends on coupling action of surface roughness of the harder counter surface and lubrication regime. The knowledge gained herein provides a better understanding for the tribological characteristics of rubber elastomers associated with surface roughness, and it is useful to reduce sealant wear and lengthen their service life.

A Preparation Method of Porous Surface Nitrile Butadiene Rubber with Low Friction Coefficient under Water Lubrication Condition by Salt Leaching

Surface Roughness Effect on the Friction and Wear Behaviour of Acrylonitrile–Butadiene Rubber (NBR) Under Oil Lubrication

Molecular Dynamics Simulations Probing the Effects of Interfacial Interactions on the Tribological Properties of Nitrile Butadiene Rubber/Nano-SiO 2 under Water Lubrication

Tribological and physical properties of PTFE-NBR self-lubricating composites under water lubrication

Tribological modification of hydrogenated nitrile rubber nanocomposites for water-lubricated bearing of ship stern shaft

Effects of graphene and CNTs reinforcement on the friction mechanism of nitrile butadiene rubber under water lubrication conditions

Effect of particle concentration on the tribological properties of NBR sealing pairs under contaminated water lubrication conditions

A novel ternary interpenetrating polymer networks based on NBR/PU/EP with outstanding damping and tribological properties for water-lubricated bearings

Effect of Particle Size on Tribological Properties of Rubber/Steel Seal Pairs Under Contaminated Water Lubrication Conditions

Optimizing the tribological performance of DLC-coated NBR rubber: The role of hydrogen in films

Tribological and Vibration Properties of Three Different Polymer Materials for Water-Lubricated Bearings

Effect of cyanide content on the tribological performance of nitrile butadiene rubber

Tribological Properties of Water-lubricated Rubber Materials after Modification by MoS2 Nanoparticles

Magnetic-controlled friction behavior of a water-lubricated magnetorheological rubber bearing under boundary lubrication

Study on the effect of particle size and dispersion of SiO2 on tribological properties of nitrile rubber

Experimental Study on Friction Characteristics and Water Film Stiffness of Water Lubricated Rubber Bearings

Experimental Study on the Dynamic Performance of Water-Lubricated Rubber Bearings with Local Contact

Effect of interfacial interaction between Nano-SiO2 and NBR on tribological properties of NBR water-lubricated bearings

Efficiency of surface texturing in the reducing of wear for tests starting with initial point contact

Effect of nitrile butadiene rubber hardness on the sealing characteristics of hydraulic O-ring rod seals

Effect of abrasive size on friction and wear characteristics of nitrile butadiene rubber (NBR) in two-body abrasion