Abstract:Pipelines are widely used in many fields including power industry, petroleum system etc. Pipelines such as the surge line and main pipe are easily subjected to thermal stratification as a result of the non-uniform temperature distribution in the nuclear power plants. Furthermore, pipelines can suffer from thermal fatigue in virtue of long-term uneven stress distribution. When the surge line or main pipe subjected to thermal stratification and thermal fatigue keeps operating for long time, the pipe leakage may happen because of the existence of pipeline crack. The thermal pipeline crack leakage mainly appears in the region with stress concentration. As the pipe system is always covered with thermal insulation layer in the actual nuclear power plants, it is hard for workers to observe pipeline leak, which can have a bad effect on the normal operation. Since the temperature and humidity close to the pipe crack due to leakage can change compared to the normal operation, we can infer from the temperature and humidity changes that the pipe leakage occurs. Based on this idea, the temperature and humidity near the crack of the pipe need to be measured to detect the leakage fields. As the fluids with high pressure and high temperature flow in the pipe system in an actual nuclear power plant, the pipe leakage experiment was performed in the high pressure and high temperature condition. When the fluids with high temperature and pressure leak in the crack, the water will evaporate quickly, which means this process belongs to spray flash evaporation process. The temperature and humidity variations were monitored in the experiment with temperature and humidity probes which have the advantage of responding to the change of temperature and humidity sensitively. The data collection program was mainly written based on the LABVIEW platform. The collecting time step was set ls. As the measuring position and leakage flux are two key factors for the pipe leakage, the experiment was carried out with different measuring positions and leakage fluxes conditions. The experimental results showed that the leak flux had an important influence on the temperature and humidity near the pipe crack. The temperature and humidity started to change in a very short time with large leak flux. At the same time, the velocity of the temperature and humidity change was high with large leak flux. When the pipe leakage occurred in the location near the temperature and humidity probe, the temperature and humidity responded quickly and the velocity of temperature and humidity change was large. The experiment data can be used for the prediction of the pipe leakage in the nuclear power plants.

Analysis of Pipeline Leakage Alarm Threshold in Nuclear Power Plant

Leak Detection Design for ITER GIS Gas Fueling Manifold

Experimental Investigation On The Pipe Leakage

Better Understanding of the Capacity of Pressure Sensor Systems to Detect Pipe Burst Within Water Distribution Networks

A Comprehensive Review of the Leak Flow Through Micro-Cracks (in LBB) for Nuclear System: Morphologies and Thermal-Hydraulic Characteristics

A comprehensive review of the leak flow through micro -cracks (in LBB) for nuclear system: Morphologies and thermal -hydraulic characteristics

Leakage detection method of underground heating pipeline based on improved wavelet threshold function

Alarming Method of Loose Parts in Nuclear Power Plant Based on Adaptive Auto-regressive Model

Prediction of Leakage from Through Pipeline Crack

Research on Setting Alarm Thresholds of Gaseous Effluent Radiation Monitoring From Nuclear Power Plants in China

Gas Pipe Leak Detection Based On Circuit-Analog Tide Calculation

Research on Nuclear Post-accident Liquid Level Detection Signal Deviation in Nuclear Power Plant Reactor Building

LBB analysis of a dissimilar metal weld joint of pipe-nozzle in nuclear power plant

A Simplified Leak-Before-break Analysis Method of Pressured Pipes

The probability of the existence of defects that lead to the destruction of the pressure vessel without leak

DESIGN OF THE IMPORTANT AREA AIRBORNE RADIOACTIVITY MONITORING SYSTEM AND CALCULATION OF THE ALARM THRESHOLD OF HTR-PM

Research on the air-conditioning refrigerating pipeline leak NDT and location system

Failure analysis of leaking firefighting pipeline used in nuclear power plant: Corrosion development process and key influence factors

Leak-before-break analysis of a dissimilar metal welded joint for connecting pipe-nozzle in nuclear power plants

Leakage diffusion characteristics and harmful boundary analysis of buried natural gas pipeline under multiple working conditions

Analysis of Transient Flow Model and Leakage Detection Algorithm of Gas Straight Pipeline