Abstract:The correct electric power fluctuation process of a wind farm is essential for the operation and studying of the power grid integrated with wind power. A complete wind energy conversion model, that should take both the spatial effects and the overall effect of all the pitch angle controllers into account, is required to convert the wind fluctuation into the electric power fluctuation. Although some equivalent models have been proposed in previous studies, there is no simple solution for equivalently modeling the non-synchronous actions of the pitch angle controllers in individual wind turbine generators. This study found the relationship between the overall effect of all the pitch angle controllers and the spatial effects of the wind farm and presented a theoretical derivation of the frequency-domain equivalent modeling method. The proposed modeling method is the simplest way to obtain the equivalent model of the complete wind energy conversion process of a wind farm with consideration of all the spatial effects and the overall effects of all the pitch angle controllers. The only input signal of the proposed equivalent model is the speed of the wind before entering the wind farm, which is called the "original incoming wind speed" and the only output signal is the total power of the wind farm. In this proposed equivalent modeling method, a discrete transfer function for representing both the wind energy conversion process, and all the spatial effects of a wind farm, can be obtained, first through a wind process below the rated wind speed. Second, a compensation factor for calculating a "compensation wind speed" of the original incoming wind can be obtained through a wind process that partly exceeds the rated wind speed. Using this compensation wind speed, a compensation power with negative values can be obtained to represent the total reduced power caused by the pitch angle controllers in individual wind turbine generators. A frequency-domain equivalent model has been identified and validated by field measurements of an actual wind farm. The normalized root-mean-squared error of the model is less than 8% over the entire wind process, and the maximum error of the power ramp rate in 10 min is less than 5 MW. Finally, an example is provided to demonstrate the online use of the proposed model to convert the forecasted wind speed into output power of a wind farm in ultrashort-term wind power forecast.

An Analytical Two-Machine Equivalent Method of DFIG-Based Wind Power Plants Considering Complete FRT Processes

Analysis on Controller Aggregation Method for Equivalent Modeling of DFIG-based Wind Farm

Probabilistic Equivalent Model of Dfig-Based Wind Farms and Its Application in Stability Analysis

A Dynamic Equivalent Method for Doubly-fed Induction Generator Wind Farm Based on the Thevenin Equivalent Circuit

Transfer Function Based Equivalent Modeling Method for Wind Farm

Equivalent modelling of the DDPMSG-based wind farm based on action time clustering of limiting component

Equivalent Modeling of Wind Energy Conversion Considering Overall Effect of Pitch Angle Controllers in Wind Farm

Control Method for Fault Ride-through of DFIG-based Wind Turbines Applied to Weak Grids

A Dynamic Equivalent Method for PMSG Based Wind Farms Under Asymmetrical Faults

A Dynamic Equivalent Method for PMSG-WTG Based Wind Farms Considering Wind Speeds and Fault Severities

Fault Ride-Through Behaviors Correction-Based Single-Unit Equivalent Method for Large Photovoltaic Power Plants

Capability of DFIG WTS to ride through recurring asymmetrical grid faults

A Modeling Method for the Control Circuit of a Double-Fed Induction Generator in a Wind Power System Based on Multimodel Fusion

An Equivalent Model of Doubly-Fed Wind Generation System

Modeling and Analysis of Rotor Current of DFIG with Rotor Chopper Circuit Operative Condition During Three-Phase Symmetric Faults

Fault Current Unified Calculation Method for Whole Process Fault Ride-Through of DFIG-Based Wind Farms

Equivalent Sequence Circuit of DFIG Wind Turbines With Uninterrupted Control of Rotor Side Converter After Faults

Dynamic Equivalent Algorithm for Wind Farm Composed of Direct-Drive Wind Turbines

Fault Current Multi-Stages Calculation Method for DFIG-Based Wind Farms with Whole Fault Process Attributes under Asymmetrical Grid Fault Conditions

A Fuzzy Clustering Algorithm-Based Dynamic Equivalent Modeling Method for Wind Farm with Dfig

Fault Modeling and Characteristic Analysis of Offshore Wind Turbines with Doubly Fed Induction Generator