Abstract:Torque ripples of permanent magnet synchronous motor (PMSM) will degrade the torque performance of PMSM drive systems in high-performance applications and are one of the sources of vibration and noise. To reduce torque ripples, one of the solutions is to inject harmonic currents into stator windings, so that extra torque ripples are generated to compensate for the original ones. To obtain the optimal harmonic current solutions, torque ripple model (TRM) and speed harmonics are commonly used in optimization. However, the performance of TRM based methods in torque ripple reduction is limited due to the accuracy of the PMSM TRM model and motor parameters. Also, the speed harmonic based methods have speed limitations, since the speed harmonics caused by torque ripples will be filtered out by the inertia of the drive systems when the motor is operated over the cut-off frequency. Therefore, one torque ripple reduction method with no motor parameters involved and with no speed limitations needs to be discussed and proposed. In this paper, the response surface torque ripple model for PMSM drives is first established based on the measurements of speed harmonics. Based on the response surface torque ripple model, the motor-parameter-free solution of optimal harmonic currents is analytically derived for torque ripple reduction with minimal motor loss. The proposed method is verified by experimental results, which demonstrate that the proposed method can reduce torque ripples of PMSM drives effectively without prior knowledge of any motor parameters and can also avoid the limitation of speed operations.

Torque-Ripple Reduction of Permanent Magnet Synchronous Machine Drives Based on Novel Speed Harmonic Control at Low-Speed Operation

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

A Novel Harmonic Current Control Method for Torque Ripple Reduction of SPMSM Considering DC-Link Voltage Limit

Deadbeat Harmonic Current Control of Permanent Magnet Synchronous Machine Drives for Torque Ripple Reduction

Torque Ripple Suppression Control for Dual Three-Phase Permanent-Magnet Synchronous Motor

Torque Ripple Reduction Method for Permanent Magnet Synchronous Machine Drives With Novel Harmonic Current Control

Harmonic Current Optimization for Torque Ripple Reduction in Permanent Magnet Synchronous Machine Drives Based on Torque Ripple Surrogate Model

Torque Ripple Reduction of Permanent Magnet Synchronous Machine Drives with Tangential Vibration Acceleration Control

Adaptive Torque Ripple Suppression Methods of Three-Phase PMSM During Single-Phase Open-Circuit Fault-Tolerant Operation

Motor-Parameter-Free Solution of Optimal Harmonic Currents for Torque Ripple Reduction of PMSM Drives with Response Surface Method

Explicit Model Predictive Speed Control for Permanent Magnet Synchronous Motor With Torque Ripple Minimization

Torque Ripple Reduction Method for Interior Permanent Magnet Synchronous Machine Drives with Minimal Loss

Torque Ripple Reduction of a Salient-Pole Permanent Magnet Synchronous Machine with an Advanced Step-Skewed Rotor Design.

Synchronous Optimal Torque PWM with Low Torque Ripple under Low Carrier Ratio

Speed Ripple Reduction of Direct-Drive PMSM Servo System at Low-Speed Operation Using Virtual Cogging Torque Control Method

Torque Ripple Reduction of the Torque Predictive Control Scheme for Permanent-Magnet Synchronous Motors

Torque ripple analysis and reduction of permanent magnet synchronous motor

Attenuation Of Pmsm Torque-Ripple Based On Combination Of Equivalent-Input-Disturbance Approach And Sliding-Mode Control

Torque Ripple Suppression Based on Optimal Harmonic Current Injection in Dual Three-Phase PMSMs under Magnetic Saturation.

Hybrid Svpwm Technique for Reduced Torque Ripple in Permanent Magnet Synchronous Motor

A Novel Torque Ripple Reduction Strategy for Predictive Direct Torque Controlled Pmsg