Abstract:Winglet vortex generators (WVGs) mounted inside a circular tube, generate longitudinal vortices and offer increased turbulence level with a comparatively lower pressure penalty for a higher heat exchange performance. In this study, the thermal enhancement and flow structure arising from radially-arrayed winglets mounted at different attack and inclination angles, as well as different winglet lengths, are analyzed by CFD simulation. The flow and heat transfer behaviors are presented in the turbulent flow region for air flow, with Reynolds number ranging from 6000 to 27,000. Vortex generators are arranged inside the tube as a series of four rings, with each ring having 4 WVGs on the inner surface of a circular tube. The present research investigates the characteristics of WVGs which include four winglet inclination angles (α = 0°, 10°, 20° and 30°), five winglet attack angle (β = 0°, 10°, 20°, 30°, and 45°), and three winglet lengths (L = 10 mm, 15 mm, 20 mm). The data shows that winglets in a tube result in a considerable enhancement of Nusselt number and friction factor. It is found that Nusselt number and friction factor augment with the increase of attack angle or length, yet declines with the increase of inclination angle. The maximum of Nu is 86.88, at L = 20 mm, PR = 4.8, α = 0°, and β = 45°. The largest Nusselt number ratio, Nu/Nu0, defined as a ratio of augmented Nusselt number to the Nusselt number for fully developed smooth flow is 136%, which was obtained at a lower Reynolds number (Re = 6000). The results also illustrated that WVGs could generate longitudinal and transverse vortices to induce both impingement flow and recirculation zone leading to higher heat transfer and comparatively lower pressure drop. Nusselt number contours reveal that the wake zone behind WVGs displays the intensity of heat transfer along the tube.

THE AUGMENTATION OF INTERNAL TIP HEAT TRANSFER IN GAS TURBINE BLADES USING A PAIR OF DELTA-WINGLET VORTEX GENERATORS

On the Topology of Vortex Structures and Heat Transfer of a Gas Turbine Blade Internal Tip with Different Arrangement of Delta-Winglet Vortex Generators

Heat Transfer Characteristics of Blade Internal Tip Surface by Arrays of Delta-Winglet Vortex Generator Pairs

Influence of spacing of a delta-winglet vortex generator pair on the flow behavior and heat transfer at the internal tip of gas turbine blades

Transpiration Cooling of High Pressure Turbine Vane with Optimized Porosity Distribution

Vortical Structures and Heat Transfer Augmentation of a Cooling Channel in a Gas Turbine Blade with Various Arrangements of Tip Bleed Holes

Numerical investigation of heat transfer using a novel punched vortex generator

Parametric study of major factors affecting heat transfer enhancement in a circular tube with vortex generator pairs

Numerical Analysis on Heat Transfer Enhancement by Longitudinal Vortex Based on Field Synergy Principle

Numerical Analysis to Vortex Heat Transfer Enhancement Based on Field Synergy Principle

Heat Transfer Augmentation and Flow Visualization With Delta Winglets in a Tube: A Numerical Approach

HEAT TRANSFER ENHANCEMENT FOR GAS TURBINE BLADE LEADING EDGE COOLING USING CURVED DOUBLE-WALL/VORTEX COOLING WITH VARIOUS DISTURBING OBJECTS

Thermal performance augmentation of microchannel using curved rectangular winglet vortex generators having rectangular perforation

An experimental investigation on the thermal augmentation of internal endwall in a two-pass duct using an array of delta-winglet vortex generator pair

Thermal-hydraulic performance and optimization of attack angle of delta winglets in plain and wavy finned-tube heat exchangers

Study on Cooling Characteristics of an Internal Cooling Structure with a Sloping Sheet for Gas Turbine Blade

Numerical and Experimental Investigations of Micro Thermal Performance in a Tube with Delta Winglet Pairs

Numerical study of heat transfer and flow behavior in a circular tube fitted with varying arrays of winglet vortex generators

Hydrodynamics and heat transfer characteristics of a novel heat exchanger with delta-winglet vortex generators

Flow and Heat Transfer Characteristics in Models of Turbine Blade Tip-Walls with Three Kinds of Turning Vanes

Numerical Study of Flow and Heat Transfer Enhancement by Using Delta Winglets in a Triangular Wavy Fin-and-Tube Heat Exchanger