Abstract:Abstract Rotating stall is an unsteady flow phenomenon in flow rate reduction process of axial compressor. Single or multiple stall cells can be found in blade passage, rotating circumferentially at frequency ranging from 20% to 80% of compressor rotating frequency. Rotating stall may further lead to surge, then mass flow and pressure ratio of the compressor decrease rapidly while vibration amplitude of bearing fulcrum increases significantly, which would affect safety operation of the aero-engine. This paper reports the study on a multistage compressor with special-shaped aggressive flow path, which is significantly different from the conventional compressor with its meridian flow path midline parallel or nearly parallel to the rotating shaft axis. To study rotating stall and surge characteristics of multistage compressor with inlet distortion, this paper takes a 4.5-stage axial compressor as research object which has special S-shaped meridian flow path. On SJTU compressor test facility, the author carries out multidisciplinary tests on compressor dynamic performance (stator LE/TE and inter-stage fluctuating pressure measured by fluctuating pressure transducers, vibration measured by acceleration transducers, and dynamic stress measured by pasting strain transducers on the surface of stator blade). And in subsequent surge experiment, stall and surge signals at different rotating speeds are successfully captured. With above test data, axial, radial and circumferential instability development characteristics are studied by time domain correlation analysis, frequency domain power spectrum and coherence analysis, which preliminarily reveals the generation, development, propagation and elimination characteristics of rotating stall and surge. Meanwhile, in view of time-frequency characteristics of two instability transition processes, time-frequency analysis method based on Choi-Williams distribution model is adopted to capture instantaneous frequency characteristics. The results show that instability phenomenon exhibits quasi-exponential change in instability transition processes. Compared with traditional methods, time-frequency method is more effective in characterizing strong time-varying instability signals such as rotating stall and surge.

Analysis of the Stall Inception on Axial Compressors Using Permutation Entropy

Detection of Rotating Stall Inception Precursor of Axial Flow Compressor with Variance Analysis

Quantification Of Performance Uncertainty For A Transonic Compressor Rotor Using An Adaptive Nipc Method

Computational Model for Stall Inception and Nonlinear Evolution in Axial Flow Compressors

Aerodynamic system instability identification with sample entropy algorithm based on feature extraction

The Investigation of Axial Compressor With Aggressive Flow Path Near Stall Condition

Nonlinear Instability of Axial Flow Compression Systems

STUDY ON THE POST-STALL BEHAVIOR OF AN AXIAL-FLOW COMPRESSION SYSTEM

Analysis on the Spike-type Rotating Stall for Axial Compressor by Dynamic Mode Decomposition

Stall Inception Measurements in a High-Speed Multistage Compressor

Stall Recognition for Centrifugal Compressors During Speed Transients

Abrupt Stall Detection for Axial Compressors with Non-Uniform Inflow Via Deterministic Learning

Analysis and application of Lyapunov exponent spectra of axial-flow compression system

Permutation entropy: A nonlinear statistical measure for status characterization of rotary machines

Modeling and Detection of Rotating Stall in Axial Flow Compressors:Part I - Investigation on High-order M-G Models Via Deterministic Learning

A High-Order Model of Rotating Stall in Axial Compressors with Inlet Distortion

Analysis of the Flow Field at the Tip of an Axial Flow Compressor During Rotating Stall Process Based on the POD Method

Identify the Rotating Stall in Centrifugal Compressors by Fractal Dimension in Reconstructed Phase Space.

Experimental investigation on axial compressor stall phenomena using aeroacoustics measurements via empirical mode and proper orthogonal decomposition methods

Experimental Investigation and System Simulation Analysis for the Aerodynamic Performance of a Two-Stage Axial Compressor with Inlet Dynamic Distortion

Analysis on the Mechanism of Rotating Stall Inner a Pump Turbine in Pump Mode Based on the Proper Orthogonal Decomposition