Abstract:Due to the growing electric vehicle market and new trends to reduce fuel consumption for a healthy environment, safe and reliable vehicles are desirable for reasons beyond EV and new technology. Although certain safety standards and legislation are in place and continuously improving but several concerns including battery safety, battery performance, vehicle structure, and battery design to be considered as these affect the overall reliability of Electric vehicles (EVs). Lithium-ion battery technology is considered a good solution to power electric vehicles but potential overheating due to stressful conditions such as mechanical abuse, overcharge, over-discharge, short circuit, and excessive heat from external environment gives rise to safety issues and the occurrence of one or more than one of these can lead to thermal runaway. In most cases, an electric short circuit is a necessary but not sufficient condition for the occurrence of thermal runaway after mechanical abuse. Chemistry of the cell, the resistance of separator to heat, size of the fractured part, and rate of heat transfer all play a role in processes leading to a thermal runaway, if the cell has not gone to thermal runaway right away it can still go into a slow process of electrochemical reaction, releasing gases that eventually could lead to a catastrophic event. This abstract investigates the mechanical behaviour of the separator in the LiCoO2/Graphite cylindrical 18650 cells. Internal short circuit (ISC) behaviour, strain rate dependency, and electrochemical status of the cells (i.e. SOC dependency) are studied to understand failure patterns. Furthermore, a simple and effective constitutive model for the separator layer is formed, facilitating further mechanical analysis and numerical simulation of lithium-ion battery study. The occurrence of ISC is investigated by jellyroll deformation where the casing is removed, and quasi-static load is applied. The numerical simulation model is developed to further investigate sequential structural failures and temperature changes. Simulation results showed good accuracy with experimental results and are useful to predict structural failure of cells. The number of failures including electrolyte leakage, change in shape, sudden voltage drop/temperature rise, and gas venting are observed.

Quantifying and modeling of stress-driven short-circuits in lithium-ion batteries in electrified vehicles

Analysis of Internal Short Circuit and Thermal Runaway of Li-Ion Battery Due to Mechanical Abuse

Prediction of Shear Crack Formation of Lithium-Ion Batteries under Rod Indentation: Comparison of Seven Failure Criteria

Experiments and 3D detailed modeling for a pouch battery cell under impact loading

A Detailed Finite Element Model of Internal Short Circuit and Venting During Thermal Runaway in a 32650 Lithium-Ion Battery

An electrochemical-mechanical coupled multi-scale modeling method and full-field stress distribution of lithium-ion battery

Fracture Mode Analysis of Lithium-Ion Battery under Mechanical Loading

Safety Performance and Failure Criteria of Lithium-Ion Batteries under Mechanical Abuse

Mechanism of failure behaviour and analysis of 18650 lithium-ion battery under dynamic loadings

Data‐Driven Safety Risk Prediction of Lithium‐Ion Battery

Deformation and Failure of Lithium-Ion Batteries Treated As a Discrete Layered Structure

Internal Short Circuit of Lithium Metal Batteries under Mechanical Abuse

Data-Driven Safety Envelope of Lithium-Ion Batteries for Electric Vehicles

A Large Deformation and Fracture Model of Lithium-Ion Battery Cells Treated As a Homogenized Medium

Stress and Strain Characterization for Evaluating Mechanical Safety of Lithium-Ion Pouch Batteries under Static and Dynamic Loadings

A safety performance estimation model of lithium-ion batteries for electric vehicles under dynamic compression

Revealing the internal short circuit mechanisms in lithium-ion batteries upon dynamic loading based on multiphysics simulation

Model-based fault diagnosis approach on external short circuit of lithium-ion battery used in electric vehicles

Safety Optimal Design of Lithium-Ion Battery Cell Based on Multiphysics Models

Understanding of Stress‐Driven Internal Short Circuit Mechanisms in Lithium‐Ion Batteries with High SOCs

Thermal–Electrical–Mechanical Coupled Finite Element Models for Battery Electric Vehicle