Abstract:Conductometric detection of hydrogen sulfide (H2S) gas is highly desired in the fields of environmental protection and noninvasive human health assessment due to its unique merits of real-time monitoring, low cost, and high miniaturization. In this regard, semiconducting metal oxides, such as tin oxide (SnO2), have been extensively employed for H2S detection but suffer from constrained sensitivity, elevated operation temperature, and poor selectivity. To overcome these drawbacks, mixed-dimensional heterostructures of two-dimensional (2D) black phosphorus (BP) nanosheet-templated zero-dimensional (0D) SnO2 quantum dots (QDs) (BP/SnO2) were prepared in this work for trace H2S detection. The constituent ratio-optimized BP/SnO2 sensors showed a high response of 233.8 and swift response/recovery speeds of 16.4/9.5 s toward 5 ppm H2S and ultralow energy consumption at a relatively low operation temperature (10 mW@130 °C), rivaling or surpassing that of most of the sensors in recent academic reports and commercial products. Moreover, excellent repeatability, long-term stability, and selectivity were demonstrated. When exposed to 5 ppm H2S under 80% relative humidity, the sensor displayed a 75% response retention with respect to the dry case, revealing a favorable humidity tolerance. Furthermore, the BP/SnO2 sensors outperformed their reduced graphene oxide (rGO)- and molybdenum disulfide (MoS2)-templated counterparts in terms of response intensity and response/recovery speeds. Benefiting from the abundant p–n heterojunctions and sufficient material utility within the mixed-dimensional heterostructures, the as-prepared BP/SnO2 sensors showcased brilliant application prospects for energy-saving and portable H2S detection systems.

Boosted Interfacial Charge Transfer in SnO2/SnSe2 Heterostructures: Toward Ultrasensitive Room-Temperature H2S Detection

Boosted interfacial charge transfer in SnO 2 /SnSe 2 heterostructures: toward ultrasensitive room-temperature H 2 S detection

Boosted interfacial charge transfer in SnO<sub>2</sub>/SnSe<sub>2</sub> heterostructures: toward ultrasensitive room-temperature H<sub>2</sub>S detection

A lateral built-in field of the 2D/2D SnS2/SnSe2 in-plane heterostructure with boosted interfacial charge transfer

Engineering of in-plane SnS2-SnO2 nanosheets heterostructures for enhanced H2S sensing

Boosting room-temperature NO2 detection via in-situ interfacial engineering on Ag2S/SnS2 heterostructures

Rapid room-temperature H2S detection based on Bi2S3/CuO heterostructures: the synergy of increased surface-adsorbed oxygen and heterojunction effect

Bi2S3/ZnS Heterostructures for H2S Sensing in the Dark: the Synergy of Increased Surface-Adsorbed Oxygen and Charge Transfer

Sulfur dioxide gas sensing at room temperature based on tin selenium/tin dioxide hybrid prepared via hydrothermal and surface oxidation treatment

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Photoelectric H2S Sensing Based on Electrospun Hollow CuO-SnO2 Nanotubes at Room Temperature

Pd-decorated 2D SnSe ultrathin film on SiO2/Si for room-temperature hydrogen detection with ultrahigh response

High-response H2S sensor based on ZnO/SnO2 heterogeneous nanospheres

Facile Synthesis of Mesoporous CdS/PbS/SnO2 Composites for High-Selectivity H2 Gas Sensor

Ultrasensitive H2S Gas Sensor Based on SnO2 Nanoparticles Modified WO3 Nanocubes Heterojunction

Increased Active Sites and Charge Transfer in the SnS2/TiO2 Heterostructure for Visible-Light-Assisted NO2 Sensing.

Enhanced H 2 S Gas Sensing Performance of SnO 2 /BaSnO 3 Heterostructures

Black Phosphorus Nanosheet/Tin Oxide Quantum Dot Heterostructures for Highly Sensitive and Selective Trace Hydrogen Sulfide Sensing

Enhanced surface electron migration of porous and hollow SnO2/Zn2SnO4 heterostructures for efficient triethylamine-sensing performance

Ultrafine Nanoparticles of W-doped SnO2 for Durable H2S Sensors with Fast Response and Recovery.

Solution-Processed Metal Doping of Sub-3 nm SnO2 Quantum Wires for Enhanced H2S Sensing at Low Temperature