Abstract:Lithium–sulfur batteries are one of the most promising next generation electrochemical devices with low cost and high energy density. Up to now, various metal oxides with strong interaction with lithium polysulfides (LiPs) have been designed as sulfur hosts to inhibit the notorious shuttle effect. Nitrogen doping on metal oxides can not only improve their shortcomings of poor electrical conductivity, but also introduce additional oxygen vacancies to further enhance their interaction with LiPs. In this work, the nitrogen-doped titanium monoxide (N–TiO) nanospheres have been first synthesized through a one-step method based on the synergistic effect of carbothermal reduction and nitridation reaction. The X-ray diffraction results suggested the gradually changed diffraction peak position, corresponding to the nitridation process. Through the calculation of Gibbs free energies in the temperature range of 800–1500 K, it was confirmed that TiO2 can directly transform to TiO and then to TiN. Moreover, the structural characterization and X-ray photoelectron spectroscopy results suggested the synthesized N–TiO nanospheres contain mixed valences of Ti4+, Ti3+, and Ti2+, together with a significantly increased O vacancy concentration. By using N–TiO/S as the cathode, a high initial capacitance of 1438 mA h g–1 at 0.2 C can be achieved, which was higher than those of the undoped TiO/S and TiN/S electrodes. In addition, such a cathode also delivered an initial discharge capacity of 1105 mA h g–1 at 2 C, and retained 474 mA h g–1 after 800 cycles, corresponding to the capacity decay rate of 0.071% per cycle. The strong interaction between O vacancies in N–TiO and LiPs, which has been confirmed through visible adsorption experiment and cyclic voltammetry curves of the Li2S6 symmetric cells, is the main reason for its excellent electrochemical performance. This work can provide new ideas for the preparation and application of N-doped metal oxide materials in the field of lithium–sulfur batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00560?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00560</a>.Thermodynamic calculation methods; SEM images of the as synthesized TiO2 nanospheres; STEM image and SEI of the PDA-coated TiO2 nanospheres with corresponding EDX mapping scan results; SEM images of N-TiO without PDA coating; morphology and structural characterization results of TiN and Ar-TiO nanospheres; high-resolution SEI images of the three types of nanospheres; TGA curves and structural characterization results of N-TiO/S, Ar-TiO/S, and TiN/S cathodes; CV curves of the N-TiO/S electrode and Li2S6 symmetric cells with the three types of nanospheres as electrodes; galvanostatic charge–discharge curves of the three electrodes; calculated integrated area and relative content of fitted peaks in XPS spectra; and constants involved in the calculation of Gibbs free energies(<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00560/suppl_file/ae1c00560_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Dealloying-derived Nanoporous Deficient Titanium Oxide As High-Performance Bifunctional Sulfur Host-Catalysis Material in Lithium-Sulfur Battery

Anatase/Rutile Phases Regulating TiO2/C Heterointerfaces for Enhanced Polysulfide Conversion in Sulfur Cathodes

Leveraging doping strategies and interface engineering to enhance catalytic transformation of lithium polysulfides for high-performance lithium-sulfur batteries

Titanium oxide-Ti3C2 hybrids as sulfur hosts in lithium-sulfur battery: Fast oxidation treatment and enhanced polysulfide adsorption ability

Enhancing Catalytic Activity of Titanium Oxide in Lithium–Sulfur Batteries by Band Engineering

Green and facile fabrication of porous titanium dioxide as efficient sulfur host for advanced lithium-sulfur batteries: An air oxidation strategy

Formation Mechanism of Nitrogen-Doped Titanium Monoxide Nanospheres and Their Application as Sulfur Hosts in Lithium Sulfur Batteries

Interface-induced polymerization strategy for constructing titanium dioxide embedded carbon porous framework with enhanced chemical immobilization towards lithium polysulfides

Defective TiO2-graphene heterostructures enabling in-situ electrocatalyst evolution for lithium-sulfur batteries

Oxygen-defective MnO2 Decorated Carbon Nanotube As an Effective Sulfur Host for High Performance Lithium Sulfur Battery

Strong Sulfur Binding with Conducting Magnéli-phase Ti(n)O2(n-1) Nanomaterials for Improving Lithium-Sulfur Batteries.

Promoting Polythionate Intermediates Formation by Oxygen-Deficient Manganese Oxide Hollow Nanospheres for High Performance Lithium-Sulfur Batteries

TiC nanoparticles supported on free-standing carbon nanofibers enabled high-performance Lithium–Sulfur batteries

TiN@C Nanocages As Multifunctional Sulfur Hosts for Superior Lithium-Sulfur Batteries.

Engineering a TiNb2O7-Based Electrocatalyst on a Flexible Self-Supporting Sulfur Cathode for Promoting Li-S Battery Performance

Atomic-Level Catalyst Coupled with Metal Oxide Heterostructure for Promoting Kinetics of Lithium-Sulfur Batteries

Immobilizing Polysulfide by In Situ Topochemical Oxidation Derivative TiC@Carbon‐Included TiO 2 Core–Shell Sulfur Hosts for Advanced Lithium–Sulfur Batteries

Construction of Ti4O7/TiN/carbon microdisk sulfur host with strong polar N–Ti–O bond for ultralong life lithium–sulfur battery

Facile Preparation of Porous TiN-C Microspheres As an Efficient Sulfur Host for High Performance Lithium-Sulfur Battery

Sulfur-doped LaNiO3 Perovskite Oxides with Enriched Anionic Vacancies and Manipulated Orbital Occupancy Facilitating Oxygen Electrode Reactions in Lithium-Oxygen Batteries

Efficient and Homogenous Precipitation of Sulfur Within a 3D Electrospun Heterocatalytic Rutile/Anatase TiO2-x Framework in Lithium–Sulfur Batteries