Abstract:The development of Li-S batteries is largely impeded by the complicated shuttle effect of lithium polysulfides (LiPSs) and sluggish reaction kinetics. In addition, the low mass loading/utilization of sulfur is another key factor that makes Li-S batteries difficult to commercialize. Here, a porous catalytic V2O3/V8C7@carbon composite derived from MIL-47 (V) featuring heterostructures is reported to be an efficient polysulfide regulator in Li-S batteries, achieving a substantial increase in sulfur loading while still effectively suppressing the shuttle effect and enhancing kinetics. Systematic mechanism analyses suggest that the LiPSs strongly adsorbed on the V2O3 surface can be rapidly transferred to the V8C7 surface through the built-in interface for subsequent reversible conversion by an efficient catalytic effect, realizing enhanced regulation of LiPSs from capture to conversion. In addition, the porous structure provides sufficient sulfur storage space, enabling the heterostructures to exert full efficacy with a high sulfur loading. Thus, this S-V2O3/V8C7@carbon@graphene cathode exhibits prominent rate performance (587.6 mAh g(-1) at 5 C) and a long lifespan (1000 cycles, 0.017% decay per cycle). It can still deliver superior electrochemical performance even with a sulfur loading of 8.1 mg cm(-2). These heterostructures can be further applied in pouch cells and produce stable output at different folding angles (0-180 degrees). More crucially, the cells could retain 4.3 mAh cm(-2) even after 150 cycles, which is higher than that of commercial lithium-ion batteries (LIBs). This strategy for solving the shuttle effect under high sulfur loading provides a promising solution for the further development of high-performance Li-S batteries.

TiO 1.75 /Cu(2,4-PDCA) 2 heterostructure with simultaneous adsorption-directed transfer-bidirectional catalysis for effectively controlling shuttling in lithium-sulfur batteries

3D Net-like GO-d-Ti3C2Tx MXene Aerogels with Catalysis/Adsorption Dual Effects for High-Performance Lithium-Sulfur Batteries

Enhanced catalysis LiS<sub>3</sub> of radical-to-polysulfide interconversion <i>via</i> increased sulfur vacancies in lithium-sulfur batteries

A Novel Strategy for High-Stability Lithium Sulfur Batteries by in Situ Formation of Polysulfide Adsorptive-Blocking Layer

Twinborn TiO<sub>2</sub>-TiN heterostructures enabling smooth trapping-diffusion-conversion of polysulfides towards ultralong life lithium-sulfur batteries

Immobilizing Polysulfide by In Situ Topochemical Oxidation Derivative TiC@Carbon‐Included TiO 2 Core–Shell Sulfur Hosts for Advanced Lithium–Sulfur Batteries

Synergistic Adsorption-Electrocatalysis of 2D/2D Heterostructure Toward High Performance Li-S Batteries

Capture and Catalytic Conversion of Polysulfides by In Situ Built TiO<sub>2</sub>-MXene Heterostructures for Lithium-Sulfur Batteries

Cobalt/MXene‐derived TiO2 heterostructure as a functional separator coating to trap polysulfide and accelerate redox kinetics for reliable lithium‐sulfur battery

Defective TiO2-graphene heterostructures enabling in-situ electrocatalyst evolution for lithium-sulfur batteries

Synergistic Adsorption-Catalytic Sites TiN/Ta2O5 with Multidimensional Carbon Structure to Enable High-Performance Li-S Batteries

Capture and Catalytic Conversion of Polysulfides by in Situ Built TiO2‐MXene Heterostructures for Lithium–Sulfur Batteries

Enhanced Polysulfide Regulation <i>via</i> Porous Catalytic V<sub>2</sub>O<sub>3</sub>/V<sub>8</sub>C<sub>7</sub> Heterostructures Derived from Metal-Organic Frameworks toward High-Performance Li-S Batteries

Leveraging doping strategies and interface engineering to enhance catalytic transformation of lithium polysulfides for high-performance lithium-sulfur batteries

Rationally designing a Ti3C2Tx/CNTs-Co9S8 heterostructure as sulfur host with multi-functionality for high-performance lithium-sulfur batteries

Strong Sulfur Binding with Conducting Magnéli-phase Ti(n)O2(n-1) Nanomaterials for Improving Lithium-Sulfur Batteries.

MXene‐Derived Ti n O 2 n− 1 Quantum Dots Distributed on Porous Carbon Nanosheets for Stable and Long‐Life Li–S Batteries: Enhanced Polysulfide Mediation via Defect Engineering

Construction of Ti4O7/TiN/carbon microdisk sulfur host with strong polar N–Ti–O bond for ultralong life lithium–sulfur battery

In Situ Constructing a Catalytic Shell for Sulfur Cathode via Electrochemical Oxidative Polymerization

Bimetallic sulfides heterostructure efficient adsorption and catalytic of polysulfides for high-performance lithium-sulfur batteries

CoP nanocages intercalated MXene nanosheets as a bifunctional mediator for suppressing polysulfide shuttling and dendritic growth in lithium-sulfur batteries