Abstract:Purpose The purpose of this study is to investigate the influence of surface texture on the subsurface characteristics of contact interfaces under elastohydrodynamic lubrication condition. As a typical contact form of gears and bearings, the optimization of friction characteristics at the elastohydrodynamic lubrication (EHL) interface has attracted the attention of scholars. Laser surface texturing is a feasible optimization solution, but there have been concerns about whether the surface texture of high-pair parts will affect their fatigue life. Design/methodology/approach To examine the impact of texture preparation on the subsurface characteristics of high-pair interfaces under EHL conditions, a point contact EHL model is developed that takes into account the effect of textured surface topography. The pressure and thickness of the oil film are calculated as input parameters under different loads and entrainment velocities. The finite element method is used to simulate the impact of textures with varying diameters, densities and depths on the subsurface characteristics of the elastohydrodynamic interface. According to ISO 25178, analyze the relationship between 3D topography parameters and subsurface characteristics and study the trend of friction characteristics and subsurface characteristics based on the results of the ball on disc friction tests. Findings The outcomes suggest that under different rotational velocity and load conditions, the textured surfaces exhibit improved friction reduction effects; however, the creation of textures can result in significant subsurface plastic deformation and local peeling. The existence of texture makes the larger stress zone in the subsurface layer closer to the surface, leading to fatigue failure near the surface. Reasonable design parameters can help enhance the attributes of the subsurface. A smaller Sa and a Str greater than 0.5 can achieve ideal subsurface properties on the textured surface. Originality/value This paper investigates the influence of surface texture on the friction and subsurface characteristics of EHL interfaces and analyzes the impact of surface texture on interface contact performance while achieving lubrication improvement functional characteristics. The results provide theoretical support for the optimization design and functional regulation of surface texture in EHL interfaces. Peer review The peer review history for this article is https://publons.com/publon/10.1108/ILT-10-2023-0324/

A Deterministic Contact Evolution and Scuffing Failure Analysis Considering Lubrication Deterioration Due to Temperature Rise under Heavy Loads

Scuffing Failure Analysis Based on a Multidisciplinary Coupling Model and Experimental Verification

Scuffing Failure Analysis Based on a Multiphysics Coupling Model and Experimental Verification

Simulations Of Scuffing Based On A Dynamic System Model

Effects of Texture Orientation on the Mixed Thermal Elastohydrodynamic Lubrication and Fatigue Life in Point Contacts

Theoretical and Experimental Exploration on the Micro Asperity Contact Load Ratios and Lubrication Regimes Transition for Water-Lubricated Stern Tube Bearing

Deterministic Solutions and Thermal Analysis for Mixed Lubrication in Point Contacts

Research on Gear System Scuffing Load Capacity and Its Numerical Calculation Methods

Evaluation of Scuffing Load Capacity of Helical Gear Based on the Tribo‐Dynamic Model

Thermal Analysis of Lubricated Three-Dimensional Contact Bodies Considering Interface Roughness

A Mixed Elastohydrodynamic Lubrication Model With Asperity Contact

A lubricated wear model for determining wear surface geometry on journal-bearing surfaces

Study on Scuffing Failure of Gas Turbine Ball Bearing Based on 3D Mixed Lubrication and Dynamics

Numerical Solution of Mixed Thermal Elastohydrodynamic Lubrication in Point Contacts with Three-Dimensional Surface Roughness

A Mixed Elasto-Hydrodynamic Lubrication Model for Studying Tribological Properties of Rough Surfaces

Temperature Analysis of Involute Gear Based on Mixed Elastohydrodynamic Lubrication Theory Considering Tribo-Dynamic Behaviors

Study on the subsurface characteristics of textured surfaces under EHL condition

Experimental and Modelling Study of Friction Evolution and Lubricant Breakdown Behaviour under Varying Contact Conditions in Warm Aluminium Forming Processes

Effect of thermo-elastic deformation on lubricated point contacts

Mixed Thermo-Elasto-hydrodynamic Lubrication and Wear Coupling Simulation Analysis for Dynamical Load Journal Bearings

Determination of Critical Temperature of Scuffing for AISI 8620 Steel Gear Contacts Lubricated by Dexron 6 Through Computational Simulation of Experiment