Abstract:Fabrication of optoelectronic devices relies on the expensive, energy-consuming conventional tools such as chemical vapor deposition, lithography, and metal evaporation. Furthermore, the films used in these devices are usually deposited at elevated temperatures and under vacuum that impose further restrictions to the device fabrication. Developing an alternative technology would contribute to the efforts on achieving a more sustainable optoelectronics technology. Keeping this focus in our focus, here we present a simple technique to fabricate visible photodetectors. These fully solutionprocessed and transparent metal-semiconductor-metal photodetectors employ silver nanowires (Ag NW) as the transparent electrodes replacing the indium-tin oxide (ITO) commonly used in optoelectronic devices. By repeatedly spin coating Ag NWs on a glass substrate followed by the coating of ZnO nanoparticles, we obtained a highly conductive transparent electrode reaching a sheet resistance of 95 /□ as measured by the four-probe method. Optical spectroscopy revealed that the transmittance of the Ag NW-ZnO films was 84% at 450 nm while transmittance of the ITO films was 90% at same wavelength. Following the formation of the conductive film, we scratched it using a heated surgical blade to open a gap. The scanning electron microscope images indicate that a gap of ~30 mm is opened forming an insulating line. As the active layer, we drop-casted red-emitting CdSe/ZnS core-shell quantum dots (QDs) on to this gap to form a metal-semiconductor-metal photodetector. These visible QD-based photodetectors exhibited responsivities and detectivities up to 8.5 mA/W and 0.95x109 Jones, respectively. These proof-of-concept photodetectors show that the environmentally friendly, low-cost, and energy-saving technique presented here can be an alternative to conventional, more expensive, and energy-hungry techniques while fabricating lightharvesting devices.

All-solution-processed, High-Performance Self-Powered UVA Photodetectors with Non-Opaque Silver Nanowires Electrode

High-Performance Self-Powered Transparent Metal–Semiconductor-Metal Ultraviolet Photodetector Based on Sub-10 Nm Thick Dual-Asymmetric Interdigitated Electrodes

Efficiency Enhancement of TiO2self-powered UV Photodetectors Using a Transparent Ag Nanowire Electrode

Self-powered Diamond Ultraviolet Photodetector with a Transparent Ag Nanowire Electrode.

Solution‐Processed Self‐Powered Transparent Ultraviolet Photodetectors with Ultrafast Response Speed for High‐Performance Communication System

Novel Transparent and Self-Powered UV Photodetector Based on Crossed ZnO Nanofiber Array Homojunction.

Large-area Flexible and Transparent UV Photodetector Based on Cross-Linked Ag NW@ZnO NRs with High Performance

A Nanocomposite Ultraviolet Photodetector Based on Interfacial Trap-Controlled Charge Injection.

Visible-Blind And Flexible Metal-Semiconductor-Metal Ultraviolet Photodetectors Based On Sub-10-Nm Thick Silver Interdigital Electrodes

Simple, sustainable fabrication of fully solution-processed, transparent, metal-semiconductor-metal photodetectors using a surgical blade as an alternative to conventional tools

Solution-Assembled Nanowires for High Performance Flexible and Transparent Solar-Blind Photodetectors

Fast-response Self-Powered Flexible Transparent Ultraviolet Photodetectors Based on a CuO/ZnO Nanowire Array Heterojunction

Solution-Processed Ultraviolet Photodetectors Based on Colloidal ZnO Nanoparticles

High-Sensitivity Photodetectors Based On Silver Nanowires/Silicon Nanopillar Arrays

A Self-Powered Ultraviolet Photodetector Based on TiO2/Ag/ZnS Nanotubes with High Stability and Fast Response

Synergetic Enhancement in Photosensitivity and Flexibility of Photodetectors Based on Hybrid Nanobelt Network

A transparent, self-powered photodetector based on p-CuI/n-TiO 2 heterojunction film with high on–off ratio

One Stone, Three Birds: SnO2 Nanosheet Arrays toward Self‐Powered Visible‐Blind UV Photodetection with High Responsivity and Rejection Ratio

High‐performance fully‐transparent ultraviolet photodetector fabricated using GaN‐based Schottky barrier photodiode

Plasmon-Enhanced Self-Powered UV Photodetectors Assembled by Incorporating Ag@SiO2 Core–Shell Nanoparticles into TiO2 Nanocube Photoanodes

A Transparent, Self-Powered Photodetector Based on P-Cui/n-tio2 Heterojunction Film with High On–off Ratio