Abstract:The research is focused on the design and development of woven textile-based structural hollow composites. E-Glass and high tenacity polyester multifilament yarns were used to produce various woven constructions. Yarn produced from cotton shoddy (fibers extracted from waste textiles) was used to develop hybrid preforms. In this study, unidirectional (UD), two-dimensional (2D), and three-dimensional (3D) fabric preforms were designed and developed. Further, 3D woven spacer fabric preforms with single-layer woven cross-links having four different geometrical shapes were produced. The performance of the woven cross-linked spacer structure was compared with the sandwich structure connected with the core pile yarns (SPY). Furthermore, three different types of cotton shoddy yarn-based fabric structures were developed. The first is unidirectional (UD), the second is 2D all-waste cotton fabric, and the third is a 2D hybrid fabric with waste cotton yarn in the warp and glass multifilament yarn in the weft. The UD, 2D, and 3D woven fabric-reinforced composites were produced using the vacuum-assisted resin infusion technique. The spacer woven structures were converted to composites by inserting wooden blocks with an appropriate size and wrapped with a Teflon sheet into the hollow space before resin application. A vacuum-assisted resin infusion technique was used to produce spacer woven composites. While changing the reinforcement from chopped fibers to 3D fabric, its modulus and ductility increase substantially. It was established that the number of crossover points in the weave structures offered excellent association with the impact energy absorption and formability behavior, which are important for many applications including automobiles, wind energy, marine and aerospace. Mechanical characterization of honeycomb composites with different cell sizes, opening angles and wall lengths revealed that the specific compression energy is higher for regular honeycomb structures with smaller cell sizes and a higher number of layers, keeping constant thickness.

Progresses in the Studies of Mechanical Characteristics of 3-D Textiles Structural Composites

Mechanical performance of composites based on various three-dimensional woven-fibre preforms

In and off- axes mechanical properties of three- dimensional textile reinforced carbon composites

Material Behavior Characterization Of Textile Composite Sheets: Experiments And Simulation

A review on three-dimensional stitched composites and their research perspectives

Mechanical behavior of three‐harness twill woven composite plates under tension loading

Comparative studies on the effect of fabric structure on mechanical properties of carbon fiber/epoxy composites

A review on the mechanical performance of three-dimensional warp interlock woven fabrics as reinforcement in composites

A review of the formability of woven fabrics for composite materials

Research Progress on Preform Forming and Microstructure of 3D Braided Composites

Experimental study on tension and compression mechanical property of 3D fine woven punctured C/C composites

Effects of Structural Parameters on Fiber Volume Fraction of 3D Woven Composites

A review of numerical modeling of three-dimensional braided textile composites

Design, Development, and Characterization of Advanced Textile Structural Hollow Composites

Study on Tensile and Compressive Properties and Size Effect of 3D Fine Woven Punctured C/C Composites

Advances in Multiscale Modeling and Mechanical Properties Characterization of 3D‐Braided Composites

Structural Design And Experimental Research Of Woven Textile Lattice Composites: A Review

Research Status of 3D Braiding Technology

Effect of Manufacturing Defects on Mechanical Properties and Failure Features of 3D Orthogonal Woven C/C Composites

Investigation of the mechanical properties of the 3D woven composites with random pores

Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results