Abstract:The solid waste (e.g coal gangue, coal fly ash, desulfurization gypsum, gasification fine slag, furnace bottom slag) is made into underground backfilling material, which not only controls surface subsidence, but also is an effective way to consume a large amount of solid waste. In this paper, the strength at different curing ages is taken as the response target, the proportioning experiment of desulfurization gypsum, gasification fine slag and furnace bottom slag is designed by response surface methodology. The experimental results were analyzed by analysis of variance (ANOVA), the strength regression models at different curing ages were established, the interaction and influence effects of three kinds of solid wastes on age strength are analyzed. It is concluded that the influence of desulfurization gypsum and gasification fine slag on the age strength of backfill specimens is negative, the influence of furnace bottom slag on early strength is negative, but the influence on 28-day strength shows positive effect. Through regression model prediction and experimental verification, it is concluded that the optimal ratio of solid waste for underground backfilling is coal gangue: coal fly ash: desulfurization gypsum: gasification fine slag: furnace bottom slag = 1:0.4:0.2:0.1:0.1. Then, the compression deformation and failure morphology evolution of the backfill specimens with the optimal ratio are analyzed, it can be known that the stress rebound characteristics can make the backfill unload slowly and avoid sudden bursting; The failure morphology of the backfill changes obviously in the compression process, and preventive and remedial measures can be taken in time according to the failure morphology. Finally, Mercury Intrusion Porosimetry (MIP) test was carried out on the pore structure of the backfill specimen with the optimal ratio, which showed that the pores in the backfill were mostly closed pores, with a pore size range of 5-3×10 5 nm, mainly medium and large pores, and the compactness was not high; The results of X-Ray Diffraction (XRD) and Scanning Electron Microscope-Energy Dispersive Spectromete (SEM-EDS) showed that there are few active components in the solid waste, and there is no hydration reaction between the solid wastes. The main minerals in the backfill specimens are gypsum, quartz, kaolinite, mullite and calcite. The content of hydration products of cement and solid waste are mainly thin rod-like ettringite and cotton-like and fibrous gel. Its content is less, so the strength of specimen is lower.

Workability and strength characteristics of alkali-activated slag-bentonite backfills for vertical slurry cutoff wall

Comparative research on the application of slag as an alternative to cement in binder-bentonite cutoff wall backfills

Using alkali-activated dredge sludge ash-bentonite for low permeability cutoff walls: The engineering properties and micromechanism

Effect of Slag Gypsum Binder as a Substitute to Cement on the Stability of Backfill Mining

Study on proportioning experiment and performance of solid waste for underground backfilling

Mechanical grinding activation of modified magnesium slag and its use as backfilling cementitious material

Recycling of phosphogypsum and red mud in low carbon and green cementitious materials for vertical barrier

Development and field application of a modified magnesium slag-based mine filling cementitious material

A preliminary study of aeolian sand-cement-modified gasification slag-paste backfill: Fluidity, microstructure, and leaching risks

Study on the effect of multi-source solid waste on the performance of its backfill slurry

Heavy metals containment by vertical cutoff walls backfilled with novel reactive magnesium-activated slag-bentonite-sand: Membrane and diffusion behavior

Basic characteristics of magnesium-coal slag solid waste backfill material: Part I. preliminary study on flow, mechanics, hydration and leaching characteristics

Experimental study on the production of carbon-absorbing backfill material from freshly mixed modified magnesium slag slurry

Comparison between CaO- and MgO-activated ground granulated blast-furnace slag (GGBS) for stabilization/solidification of Zn-contaminated clay slurry

Application of desulfurization gypsum as activator for modified magnesium slag-fly ash cemented paste backfill material

Field test on the stress state and consolidation behavior of soil-bentonite cutoff walls

Hydro-mechanical behavior and microstructure evolution of red clay-bentonite backfills

Preparation and microstructure analysis of alkali-activated ground granulated blast furnace slag-steel slag grouting materials

Analysis of the Mechanical Properties of Cured Sludge by Alkaline Excitation of Phosphogypsum

Experimental study on solidification/stabilisation of high-salt sludge by alkali-activated GGBS and MSWI bottom ash cementitious materials

Engineering Characteristics and Microscopic Mechanism of Soil–Cement–Bentonite (SCB) Cut-Off Wall Backfills with a Fixed Fluidity