Abstract:The angle of repose and characteristics of the base stress distribution underneath granular piles serve as essential indicators in understanding the mechanical and packing properties of particle system. One counterintuitive phenomenon is that there is an evident dip of the base stress beneath the pile apex that might have implications in the design of granular pile facilities. The repose angle and stress dip are influenced by many categories of factors and exhibit different variations. Based on the localized source method, particle packing experiments were conducted to investigate the effects of funnel height, particle size, particle shape, and packing method on the repose angle and the vertical stress distribution of granular piles. The experimental results show that the repose angle of piles of irregular particle shape and higher funnel height is much larger, but there is a decreasing trend of repose angle with increasing particle sizes. The natural packing angles before and after the critical collapse of granular pile exhibits periodic variation. On the other hand, the stress dip phenomenon occurred in all granular piles constructed by localized procedure. An increase in funnel height and a middle particle size mitigate the stress dip to some extent, whereas irregular particle shape exacerbates it. Comparison of the results from different packing methods reveals that larger repose angle and more pronounced stress dip are observed in confined packing piles compared to that in free packing piles. Considering a growth rate of less than 5 %, the average vertical stress under the sand silo reaches saturation state. Moreover, the pressure on the silo wall increases with the height of silo pile but remains somewhat lower than predicted by the Ketchum equation and current design values.

Relationship Between Residual Contact Force and Residual Stress in Granular Packings Subject to Partial Loading and Unloading

Numerical Simulations of Granular Material Behavior under Rotation of Principal Stresses: Micromechanical Observation and Energy Consideration

Contact Force Distribution and Induced Anisotropy in Granular Materials under Biaxial Test

Incremental behavior of granular soils: a strain response envelope perspective

The Angle of Repose and Base Stress Distribution of Granular Piles: an Experimental Investigation

Complex Network Analysis of Force Chain Structure for Granular Materials under Loading and Unloading Conditions

A Network-Based Investigation on the Strong Contact System of Granular Materials under Isotropic and Deviatoric Stress States

Numerical study of the stress response of two-dimensional dense granular packings

Investigation on the Friction Mechanism and Its Relation to the Force Chains During Powder Compaction

On the Influence of Inter-Particle Friction and Dilatancy in Granular Materials: a Numerical Analysis

Understanding the effects of inter-particle contact friction on the elastic moduli of granular materials

Nonlinear elastic stress response in granular packings

Response of a hexagonal granular packing under a localized overload: effects of pressure

Experimental and Numerical Study on the Force Transmission in Granular Packings under the Hypergravity

Revisiting the Confined Comminution of Granular Materials with the Consideration of the Initial Particle Size Distributions and Repetitive Loadings

Visualization of Force Networks in 2D Dense Granular Materials

Contact networks and force transmission in aggregates of hexapod-shaped particles

Evolution of the force chain structure of partially saturated granular material under triaxial compression conditions

Contact angle entropy and macroscopic friction in non-cohesive two dimensional granular packings

Internal states of model isotropic granular packings. II. Compression and pressure cycles

Coordinated Stress-Structure Self-Organization in Granular Packing